Skip to content

Lambertones | The TRIPLE SHOT | Single Coil S-Type Pickups w/ Enhanced Clarity & Consistency

Original price $439.00 - Original price $499.00
Original price $439.00
$535.00
$535.00 - $655.00
Current price $535.00

or 4x fortnight payments of $133.75 AUD with

CONFIGURATION: SSS (RH Flat Magnet)
SINGLE COIL COVER: Bright White
HUMBUCKER COVER: NONE (SSS)

Introducing the Lambertones Pickups Strat-style guitar pickup set. (1) neck pickup + (1) middle pickup + (1) bridge pickup.

The Triple Shot is based on John Mayer's favourite 1964 vintage Strat, but with enhanced clarity and consistency. Alnico magnets paired with a unique wire and tension combination produce beautifully smooth and velvety lead lines. The Triple Shot features a RWRP winding for hum-cancelling 2/4 positions; a slightly chunky and springy low-end, clean and crisp highs, massive quack in positions 2/4, and all without a heavy and overbearing mid-range.

These take pedals surprisingly well and maintain incredible clarity even when you stack on the drives. Back to the basics, and they are so, so good.

Select the flat magnet profile for neck radii of 9.5"+ and staggered magnets for neck radii of 9.0 and below.

With all the flavoured lattes and soy cappuccinos in the world its sometimes hard to tell where the origin of the roast was. Lets take it back to the basics, stripped down, farm to table, guitar to amp, just straight tone.


Technical Specs

Neck Pickup

3.6k DCR
Polarity: North
String Spacing: 52mm

Middle Pickup

4.1k DCR
Polarity: South
String Spacing: 52mm

Bridge Pickup

3.95k DCR
Polarity: North
String Spacing: 52mm

Additional Tech Info:
  • If you select the HSS or HSH configuration the humbucker will come automatically with our 4-wire configuration for coil-splitting capabilities.
  • Choose FLAT Magnet Radius for a neck radii between 9.5"-16"+.
  • Choose STAGGERED magnet radius for a neck radii between 7.25-9.5"
  • HSS/HSH Wiring Color Codes:

Black: Ground

Bare: Ground

White: Screw coil finish (can be soldered to red for standard humbucker sound)

Red: Slug coil finish (can be soldered to white for standard humbucker sound)

Green: Hot to the switch


>> Installation Guide PDF