Skip to content
Slow Gear Electronics | Pedalboard IEM Headphone Amp | w/ Stereo AUX input (SGE - HEADPHONE - AMP) - Gsus4

Slow Gear Electronics | Pedalboard IEM Headphone Amp | w/ Stereo AUX input & Phase Polarity Correction

by Slow Gear Electronics
$399.00 - $399.00
$399.00
$399.00
$399.00 - $399.00
$399.00
Seen it cheaper? Ask us for a PRICE MATCH

or 4x fortnight payments of $99.75 AUD with ⓘ

AU & NZ Shipping Free shipping over $99 within Australia and over $199 to New Zealand. Excludes bulky, heavy and rural deliveries.
14-day returns Eligible returns may be accepted as store credit within 14 days, subject to product condition and our returns policy.
Manufacturer warranty All new products are covered by the applicable manufacturer warranty and your rights under Australian Consumer Law.
Shipping & Returns · Contact us
{formbuilder:6507}

A complete solution for Silent Practice & Live IEM Monitoring made to fit on your pedalboard.


Includes an Aux input on 3.5mm TRS, separate mix knob, only outputs on headphones. Use for connecting a phone/PC for silent rehearsal.

TS inputs and buffered outputs. No Aux on the buffered outs. L input is 1 Meg input impedance for direct connection of a guitar or bass. Buffered outputs are 47 Ohms output impedance. Connect to our M.A.I.D. for balanced XLR outs.

Power comes in via standard boss-style coaxial connector, center pin negative. 100 to 200mA supply depending on headphone impedance. Use up to 12V max for additional headroom. Will drive 8 ohm to 300 Ohm headphones or in ears via 1/4 inch TRS connector.

Physical dimensions are: 4.57 in x 3.0 in x 2.0 in (116 mm x 77 mm x 51 mm) including knob height
Connections include:

  • TS stereo inputs. High impedance (1Meg) input on the L channel for direct input of an instrument.
  • TS stereo buffered outputs. Guitar only.
  • 3.5mm stereo Aux input with mix knob.
  • Gain switch for Instrument vs Line level (affects only the headphone output.
  • Mono sum switch affects both buffered TS outs and the headphone out.
  • Polarity affects R input for buffered R out and headphone out.
  • Runs on 9 to 12Vdc only. Needs 100mA to 200mA depending on headphone impedance.
  • Output is LOUD, noise is low.
  • Pair this with MAID (Micro Active Iso/DI) or DISO+ for a full pedalboard to PA solution.

Slow Gear Electronics Headphone Amp - USER MANUAL