Skip to content
sE Electronics V Pack w/ V Kick, V7X, 3x V Beat & 2x SE8 inc Case

sE Electronics V Pack w/ V Kick, V7X, 3x V Beat & 2x SE8 inc Case

by sE Electronics
$2,499.00 - $2,499.00
$2,499.00
$2,499.00 - $2,499.00
$2,499.00
{formbuilder:6507}

Primarily designed for kick drums, floor‐toms, and electric bass, the sE Electronics V Kick is a dynamic microphone with a supercardioid polar pattern. It’s intended to be quite versatile, with four different tonalities thanks to two switches mounted on the rear of the mic. One switch controls the frequency content of the midrange, while the other changes the high‐frequency capture of the V Kick.

Thanks to these switches, you can secure a rounded midrange with a softer high end, a scooped midrange with a defined high end—or the complete opposite: A scooped midrange with a softer high‐end, or a round midrange with a softer high end. This allows you to use the mic with all sorts of styles of kick drum, from big‐band jazz to aggressive metal. The same is true for basses. You can tailor this mic for something that complements a round, vintage Ampeg tone, or a more modern back‐pickup style.

These switches are positioned on the rear of the mic, and this helps with live‐sound functionality. With different bands switching their instruments between sets, this mic can be of service in keeping changeover time to a minimum in club venues.

At the heart of the V Kick is its DMC7 SB capsule, which utilizes an aluminum voice coil for a transient‐rich sound and a bottom end extending low enough to record the fundamental frequencies of kick drums and basses. Its supercardioid pickup pattern ensures little bleed, helping you isolate the sound‐source from other drums or cymbals. The capsule is suspended inside the mic to keep it decoupled from mechanical vibration, shocks, jolts, and other issues.

The mic’s all‐metal housing is rugged, making the mic suitable for live use on the road. A gold‐plated XLR connector helps to provide a reliable signal connection. With a windscreen built into the mic, it’s already internally protected against winds, plosives, and extraneous noise. A black windscreen and a knurled nut for third‐party mounting kits are included.

Features
  • 3‐micron, gold‐sputtered diaphragm
  • Handcrafted, hand‐tuned capsule
  • Precision electrode design for a linear, naturalistic response
  • Backplate design provides smooth, natural sound and consistent off‐axis response
  • Electronic design provides low noise without the use of integrated circuits
  • Transformerless design for transparency and clarity
  • Class‐A circuitry for a high dynamic range and transient response without distortion
  • Has ‐10 and ‐20 dB pads, enabling a wide range of applications and close‐mic techniques for brass instruments, snare drums, and more
  • Low‐pass filters, selectable between 80 and 160 Hz
  • All‐metal chassis provides efficient rejection of electrical interference and noise
For more information, please visit the manufacturer's website.