LD Systems | DSP45K RACK | 4-Channel Dante DSP | Power Amp & Patchbay in 19" Rack Case
by LD Systems
Contact us for pricing
AU & NZ Shipping
Free shipping over $99 within Australia and over $199 to New Zealand. Excludes bulky, heavy and rural deliveries.
14-day returns
Eligible returns may be accepted as store credit within 14 days, subject to product condition and our returns policy.
Manufacturer warranty
All new products are covered by the applicable manufacturer warranty and your rights under Australian Consumer Law.
{formbuilder:6507}
This ready-to-use 3 U amp rack comes with LD Systems' DSP 45K power amplifier pre-wired to a patchbay providing convenient front panel input and output access. The rugged case with front and rear lids is made of 7 mm plywood with black film face and high-quality hardware.
Delivering 4 x 1,200 watts into 4 and 2 ohms, the amp features 24-bit signal processing and includes a preset library making it the perfect engine to power passive LD Systems loudspeakers such as Stinger® series models.
- Pre-loaded 3 U 19” rack case with power amp and patchbay
- DSP 45K 4-channel power amplifier with 24-bit DSP
- 4 x 1,200 watts @ 4 and 2 ohms, 2 x 2,400 watts bridged @ 4 ohms
- Integrated preset library for LD Systems loudspeakers
- Patchbay with 4 x speakON, 4 x XLR/f, 2 x XLR/m, 1 x RJ45 Neutrik connectors
- 7 mm plywood case construction with high-quality hardware and front and rear lids
Features
| Product type | Power Amplifiers |
| Product type | Power Amplifier Accessories |
| Product type | Power Amplifiers |
| Type | 19" / 3 HE |
| Weight | 17,9 kg |
| Type | 4-channel |
| Connectors | 2 x Neutrik XLR Chassis Connector |
| Connectors | 4 x Neutrik Speakon |
| Connectors | 4 x Neutrik XLR Chassis Socket |
| Connectors | RJ45 |
| Type | 19" / 1 U |
| Rated ouput power (1kHz @ 2 Ohms) | 4 x 1200 W |
| Rated ouput power (1kHz @ 4 Ohms) | 4 x 1200 W |
| Length | 483 mm |
| Height | 44.5 mm |
| Rated ouput power (1kHz @ 8 Ohms) | 4 x 675 W |
| Rated ouput power (1 kHz @ 4 Ohms, bridged) | 2 x 2400 W |
| Depth | 110 mm |
| Material | Steel |
| Rated ouput power (1kHz @ 8 Ohms, bridged) | 2 x 1200 W |
| High Z 70Vrms / 100Vpeak | 4 x 1200 |
| High Z 100Vrms / 140Vpeak | 2 x 2400 |
| Output circuitry | Class H |
| Material thickness | 1.5 mm |
| Surface | Powder coated |
| Frequency response | 10 - 22000 |
| Total Harmonic Distortion (THD) | < 0.05 % @ 1 kHz |
| Weight | 1,5 kg |
| Signal-to-noise ratio | 104 dB |
| Protection circuits | clip limiter |
| Protection circuits | DC protection |
| Protection circuits | Multiband limiter |
| Protection circuits | over-current |
| Protection circuits | RMS speaker limiter |
| Protection circuits | Short circuit |
| Protection circuits | soft start |
| Protection circuits | Thermal protection |
| Controls | Direct access buttons |
| Controls | Exit / lock button |
| Controls | knob |
| Controls | On / off switch |
| Indicators | LC display |
| Line inputs | 4 |
| Line input connectors | Neutrik XLR |
| Line outputs | 4 |
| Line output connectors | Neutrik XLR |
| Loudspeaker outputs | 4 |
| Speaker output connections | Speakon |
| Cooling | 2 fans, temperature controlled |
| Maximum Ambient Temperature | 0 - 40 °C |
| Power supply | 100 V AC - 240 V AC, 50 - 60 Hz |
| Power supply | Switching power supply |
| Relative Humidity | < 80% (non-condensing) |
| Power consumption @ full load | 1900 W |
| Width | 482 mm |
| Height | 89 mm |
| Depth | 320 mm |
| Weight | 7,9 kg |
| Features | 19" / 2 U |
| Features | Active Power Factor Correction |
| Features | DSP controlled |