Skip to content
Behringer System 35 Complete Modular Synth (450691) - Gsus4

Behringer System 35 Complete Modular Synth

by Behringer
Sold out
$1,499.00 - $1,499.00
$1,499.00
$1,499.00
$1,499.00 - $1,499.00
$1,499.00
Seen it cheaper? Ask us for a PRICE MATCH
Contact For Availability
AU & NZ Shipping Free shipping over $99 within Australia and over $199 to New Zealand. Excludes bulky, heavy and rural deliveries.
14-day returns Eligible returns may be accepted as store credit within 14 days, subject to product condition and our returns policy.
Manufacturer warranty All new products are covered by the applicable manufacturer warranty and your rights under Australian Consumer Law.
Shipping & Returns · Contact us
{formbuilder:6507}

Complete System 35 Modular Synthesizer with 25 Modules, MIDI-to-CV Converter and EURORACK GO case

The SYSTEM 35 is an amazing tool for those who are just starting down the psychedelic, neon-bathed road of modular synthesis. This whole setup comes equipped with two 921A OSCILLATOR DRIVERS, four 921B VCOs and a 921 VCO all of which provide five fully featured voices that you can adjust and tweak any way you want! The two CP3A-M MIXER modules allow you to mix up to four inputs each which you can then patch out to other modules. Want a nice pad to your song? Have one signal go to a delay module and have another go into a step sequencer or other modules in the SYSTEM 35 for more intricate patches and hours and hours of fun! The SYSTEM 35 also includes the CP35 ATTENUATOR module with 4 linked attenuators and two sets of 4 multiples and reference voltages. Connecting a single signal to the CP35’s first input will allow it to pass to all 4 outputs. This allows you to have up to 4 variable outputs of a single signal source. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules.

  • Pre-assembled ”System 35“ modular synthesizer with 25 vintage-sounding modules from the ’70s
  • 2x 921A OSCILLATOR DRIVER with 4x 921B VCOs and 1x 921 VCO provide you with 5 fully featured voices
  • 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
  • 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
  • 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
  • 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
  • 2x CP3A-module allows CV mixing and switching for the VCOs with 1 attenuator
  • 2x CP3A-M 4 input mixer with master level, 4 outputs, and 2 sets of 4 multiples
  • 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples, and reference voltages
  • 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
  • 3x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
  • 3x 902 VOLTAGE-CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
  • 1x BP12 and 3x BP2 blank panels for a total of 18 HP expansion space
  • 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig, or S-trig outputs
  • Pre-assembled ”System 35“ modular synthesizer with 25 vintage-sounding modules from the ’70s
  • 2x 921A OSCILLATOR DRIVER with 4x 921B VCOs and 1x 921 VCO provide you with 5 fully featured voices
  • 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
  • 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
  • 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
  • 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
  • 2x CP3A-module allows CV mixing and switching for the VCOs with 1 attenuator
  • 2x CP3A-M 4 input mixer with master level, 4 outputs, and 2 sets of 4 multiples
  • 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples, and reference voltages
  • 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
  • 3x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
  • 3x 902 VOLTAGE-CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
  • 1x BP12 and 3x BP2 blank panels for a total of 18 HP expansion space
  • 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig, or S-trig outputs