Skip to content

NUX | NDD6 | DuoTime | Dual Delay Engine Effects Pedal

by NUX
Original price $249.95
Original price $249.95 - Original price $249.95
Original price $249.95
Current price $239.00
$239.00 - $239.00
Current price $239.00

or 4x fortnight payments of $59.75 AUD with

Duotime is a real stereo delay pedal with independent time / sub-division & repeat knobs. This pedal is a compact and easy to use delay pedal to replicate some of the all time favorite delay effects pedals. The Duotime offers analog delay, tape echo, digital delay, modulation delay, and verb delay.

Analog Delay (40ms~402ms) is based on the bucket-brigade device (BBD), discrete-time analog delay. The PARAMETER tweaks your modulation depth. When LEVEL and REPEAT are at maximum, turn down the TIME KNOB to zero, and experience the natural infinite feedback of the old school BBD delay.

Tape Echo (55ms~552ms) is based on a Tape Echo algorithm with NUX Core Image Technology. Use the PARAMETER to tweak the Saturation, and feel the distorted sound decay. Just like the real tape echo machine, when you adjust LEVEL and REPEAT to maximum, try adjusting the time knob down to zero, and you have infinite feedback and pitch shift flange.

Digi Delay (80ms~1000ms) is based on the modern digital delay algorithm with magic compression and filter. After reviewing decades of delay algorithm evolution, we noticed musicians were not satisfied with the mathematical digital delay sound. So we added a bit of non-digital flavor—inspired by Strymon® and Neunaber® making the sound much more musical.

MOD Delay (20ms~1499ms) is based on a DML algorithm; a weird and wonderful modulation delay. It was released in the 80's with experimental nature. We selected the most wonderful aspects highlighting the musical time sync modulation rate offering a simple, seamless romantic tone.

VERB Delay (80ms~1000ms) is the way to make your delay sound 3 dimensional. Similar to our Atlantic Delay & Reverb, we added Shimmer into the Plate reverb algorithm. It became the iconic sound of our NUX reverb. Inspired by Kit Tang, the famous Hong Kong studio guitarist, Jamtrackcentral® artist, a master of different reverb parallels with different frequency bands to add to his effect yielding an authentic 3 dimensional sound. So we combined parallel digital delay, plate reverb, and various filter shimmers to offer you an unmatched sacred atmosphere to explore.

PARAMETER controls the Plate reverb and shimmer mix.


LEVEL Knob: Controls the delay mix level.When using ENTER LOOP mode, the LEVEL knob will become your LOOP LEVEL to control Phrase Loop volume.

Delay Type Selector: This is a 5-way rotary switch. You can choose the delay type as ANALOG, TAPE, DIGI, MOD., and VERB.

PARAMETER: For Analog Delay, PARAMETER controls Modulation Depth. Increase to get wider modulated sound.

For Tape Echo, PARAMETER controls signal saturation. Increase to get more saturated and distorted sound.

For Digi Delay, PARAMETER controls signal hardness. Increase to get a more compressed and brighter sound.

For Mod Delay, PARAMETER controls Modulation Depth. Increase to get a wider modulated sound.

For Verb Delay, PARAMETER controls Reverb and Shimmer mix level. Increase to get more depth and a 3 dimensional feeling.

TIME 1: Controls delay1's delay time. When in Tap Tempo, it becomes a sub-division according to current parameter.

REPEAT 1: Controls delay1's number of repeats.

TIME 2: Controls delay2's delay time. When in Tap Tempo, it becomes a sub-division according to current parameter.

REPEAT 2:Controls delay2's number of repeats.

TAP Footswitch: Tap this foot switch to adjust the speed and delay sub-division. You can set the target sub-division by TIME 1 and TIME 2 knobs, then TAP this foot switch to adjust the speed, the DELAY 1 and DELAY 2 will change the delay time according to the current sub-division note signature. Hold this foot switch for 2 seconds, to switch current delay time between MS or BPM.

OLED Display: Shows current Delay type, and delay time in MS/BPM.

LOOP Mode: Press ON and TAP foot switch simultaneously, to enter / quit PHRASE LOOP mode. In LOOP mode, press ON foot switch to activate REC/PLAY/DUB and hold to UNDO/REDO as a normal looper pedal. OLED display shows your phrase loop status. LEVEL knob becomes LOOP LEVEL to adjust phrase loop volume. (Pedal will remember the current delay mix level when you enter LOOP mode.) All other knobs work in normal mode independently.

The Tech Features


Delay Effects: Analog Delay, Tape Echo, Digi Delay, MOD Delay, Verb Delay

Sampling Rate: 48KHz

Signal Processing: 32 bit

Frequency Response: 20Hz~20kHz - ±1dB

Maximum input level: 10dBu/2.8Vrms

Input Impedance: 5M Ohms

System Latency: 1ms

Maximum output level: 10dBu/2.8Vrms

Output Impedance: 1k Ohms

Current Draw: less than 150mA

Required Power Supply: 9v DC Centre Negative

Dimensions: 105(L)X115(W)X58(H) mm