Skip to content
Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM (28/BN10 - 200X - 8) - Gsus4

Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM

by Celestion
$195.00 - $195.00
$195.00
$195.00
$195.00 - $195.00
$195.00
Seen it cheaper? Ask us for a PRICE MATCH

or 4x fortnight payments of $48.75 AUD with ⓘ

AU & NZ Shipping Free shipping over $99 within Australia and over $199 to New Zealand. Excludes bulky, heavy and rural deliveries.
14-day returns Eligible returns may be accepted as store credit within 14 days, subject to product condition and our returns policy.
Manufacturer warranty All new products are covered by the applicable manufacturer warranty and your rights under Australian Consumer Law.
Shipping & Returns · Contact us
{formbuilder:6507}
:
Not every player wants a super-clean, high-fidelity bass sound. Characterised by an extended low end and greater linear excursion, Green Label speakers push out every note with a rich, warm tone and a powerful low-end thump.

Available with Ferrite or Neodymium magnets, Green Label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.

Specifications:

Nominal diameter254mm/10in
Power rating200Wrms
Nominal impedance8Ω
Sensitivity96dB
Magnet typeNeodymium
Voice coil diameter50.8mm/2in
Coil materialCopper
Cone materialKevlar loaded paper
Former materialPolyimide
Surround materialCloth-sealed
Frequency range45-3500Hz
Xmax4mm/0.15in
Gap depth8mm/0.31in
Voice coil winding width16mm/0.62in
Small Signal Parameters
D0.21m/8.27in
Fs65Hz
Mair3.64g/0.128oz
Mmd28.9g/1.02oz
Qms3.57
Qes0.34
Qts0.31
Re5.8Ω
Vas31.15lt/1.09ft3
BI15.03Tm
Cms0.18mm/N
Rms3.73kg/s
Le (at 1kHz)0.68mH
Mounting Information
Cut-out diameter229mm/9in
Diameter256mm/10.1in
Mounting slot dimensions6 x 8mm/0.24 x 0.31in
Mounting slot PCD245mm/9.6in
Number of mounting slots4
Overall depth112mm/4.4in
Unit weight1.5kg/3.3lb