Skip to content
ADAM Sub8 Pro 8" Active Subwoofer (14106400) - Gsus4

ADAM Sub8 Pro 8" Active Subwoofer

by ADAM Audio
$1,111.00 - $1,111.00
$1,111.00
$1,111.00
$1,111.00 - $1,111.00
$1,111.00
Seen it cheaper? Ask us for a PRICE MATCH
Payment options
Rent this item from

Payment options

AU & NZ Shipping Free shipping over $99 within Australia and over $199 to New Zealand. Excludes bulky, heavy and rural deliveries.
14-day returns Eligible returns may be accepted as store credit within 14 days, subject to product condition and our returns policy.
Manufacturer warranty All new products are covered by the applicable manufacturer warranty and your rights under Australian Consumer Law.
Shipping & Returns · Contact us
{formbuilder:6507}

ADAM Audio's first networked subwoofer brings Ethernet-based control and industry-first Sonarworks integration to compact monitoring setups. The Sub8 Pro is an 8–inch active subwoofer designed to extend the low-frequency response of nearfield monitors, with onboard DSP and remote management through the ADAM Control application. Its FEA-optimised bass port and high-excursion woofer deliver bass extension down to the lower limits of the audible spectrum, whilst a 200 W RMS Class D amplifier drives the system to 105 dB SPL at 1 metre. The front-fired, front-ported cabinet minimises placement constraints in smaller rooms.

Connectivity centres on balanced XLR and TRS inputs with 24-bit AD conversion, feeding a flexible DSP engine that handles time alignment delays up to 10 ms, four bands of parametric EQ, and variable crossover points at 70, 85, 100, or 115 Hz. The Ethernet port provides access to firmware updates and Sonarworks SoundID Reference calibration profiles, which can be uploaded directly to the subwoofer. Three operational modes address different monitoring scenarios: Stereo for conventional two-channel setups, LFE mode with a fixed 120 Hz lowpass for immersive audio workflows, and Wide mode for full-range applications. Phase adjustment is available in 45-degree increments from 0 to -315 degrees, and a TRS footswitch connection enables bypass switching.

The vinyl-wrapped MDF cabinet measures 385 mm high by 300 mm wide by 365 mm deep, with a painted MDF front panel and protective metal grille. Peak output reaches 325 W at 10% THD, whilst the thermal and peak limiters protect the driver during sustained high-level operation. Maximum power consumption sits at 400 W, dropping to 2.5 W in standby mode. The Sub8 Pro operates across a temperature range of -10° C to +40° C in non-condensing humidity below 75% RH, with under-voltage, over-current, and over-temperature protections built into the amplifier circuit.

Features
  • 8–inch high-excursion woofer with FEA-optimised bass port design
  • 200 W RMS Class D amplifier delivering 105 dB SPL at 1 metre
  • Ethernet connectivity for ADAM Control software and Sonarworks SoundID integration
  • Four bands of parametric EQ and time alignment up to 10 ms
  • Variable crossover frequencies at 70, 85, 100, or 115 Hz
  • Stereo, LFE, and Wide operational modes for different monitoring applications
  • 24-bit AD conversion via balanced XLR and TRS inputs
  • Front-fired cabinet design measuring 385 x 300 x 365 mm

For more information, please visit the manufacturer's website.