{"product_id":"shure-wireless-digital-lavalier-system-slxd1-tx-wl185m-mic-slxd5-rx-h58-520-606-mhz","title":"Shure SLXD15+ Wireless Digital Lavalier System w\/ WL185m Lavalier Microphone (H58)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003ePart of the SLXD+ range, the SLXD15+ portable bodypack wireless system features the SLXD5+ Portable Receiver and the SLXD1+ bodypack transmitter and the low-profile WL185m cardioid lavalier microphone for videographers, ENG and field production, film and location sound applications. Delivering wireless excellence, wherever required, wide-tuning SLXD+ transmitters and receivers stay in sync courtesy of a dedicated ShowLink® Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful, portable digital wireless system for on-camera cold shoe mounting and audio bag use\u003c\/li\u003e\n\u003cli\u003eTransparent 24-bit digital audio quality with \u0026gt;118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eRock solid RF with 138 MHz wide-tuning range for greater geographical coverage:\r\n\u003cul\u003e\n\u003cli\u003eUp to 11 simultaneous systems in 6 MHz TV bands\u003c\/li\u003e\n\u003cli\u003eUp to 14 simultaneous systems in 8 MHz TV bands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDual 1\/8” outputs including a headphone monitor out and switchable line\/mic output\u003c\/li\u003e\n\u003cli\u003eAutomatic Setup – once linked, SLX-D+ receivers and transmitters stay connected, despite any RF interference\u003c\/li\u003e\n\u003cli\u003eWith ShowLink® Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: \r\n\u003cul\u003e\n\u003cli\u003eChanging the transmitter frequency once open frequency is identified\u003c\/li\u003e\n\u003cli\u003eAdjust power output level\u003c\/li\u003e\n\u003cli\u003eLock and unlock transmitter controls\u003c\/li\u003e\n\u003cli\u003eTransmitter firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SLXD5+ Single-Channel Portable Wireless Receiver\u003c\/li\u003e\n\u003cli\u003e1 x SLXD1+ Bodypack Transmitter\u003c\/li\u003e\n\u003cli\u003e1 x WL185m Low-Profile Cardioid Lavalier Microphone\u003c\/li\u003e\n\u003cli\u003e1 x single-mount tie clip\u003c\/li\u003e\n\u003cli\u003e1 x snap-fit windscreen\u003c\/li\u003e\n\u003cli\u003e4 x AA batteries\u003c\/li\u003e\n\u003cli\u003e2 x audio cables\u003c\/li\u003e\n\u003cli\u003e1 x WA311 Non-Conductive Cold Shoe Mount Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"slxd-plus-update\"\u003e\n\u003ch2\u003eWhat's New with Shure SLX-D+ (PLUS) Compared to SLX-D?\u003c\/h2\u003e\n\u003ch3\u003eExpanded Frequency Coverage – One Band, More Cities!\u003c\/h3\u003e\n\u003cp\u003eThe Australian \u003cstrong\u003eH58 band (520–606 MHz)\u003c\/strong\u003e provides an \u003cstrong\u003e86 MHz tuning range\u003c\/strong\u003e, bringing the former H57 and J54 frequency ranges together in one wider band.\u003c\/p\u003e\n\u003cp\u003eFor touring musicians, churches, production companies and AV professionals travelling between cities such as \u003cstrong\u003eSydney, Melbourne, Brisbane, Adelaide and Darwin\u003c\/strong\u003e, this wider range offers greater flexibility when coordinating wireless frequencies with a single H58 band version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck frequency availability for your location:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/calculator.jands.com.au\/frqb\/\" target=\"_blank\" rel=\"noopener\"\u003eJands Wireless Frequency Calculator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUsable frequencies vary by location, local TV services and RF conditions. Check each venue before use; the full tuning range will not be available everywhere.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOther Key Improvements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShowLink® Ease\u003c\/strong\u003e – Remote transmitter control and automatic frequency changes to help manage interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Feedback Reduction (DFR)\u003c\/strong\u003e – Built into SLX-D+ receivers to help reduce unwanted feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES-256 Encryption\u003c\/strong\u003e – Protects wireless audio transmission when enabled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity\u003c\/strong\u003e – Monitor and manage your system through a compatible receiver using Shure Wireless Workbench Mobile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Latency\u003c\/strong\u003e – Reduced from 3.2 ms on SLX-D to 2.8 ms on SLX-D+.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSLX-D+ also retains the transparent \u003cstrong\u003e24-bit digital audio\u003c\/strong\u003e of the original SLX-D platform.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese are SLX-D+ system capabilities. Receiver-based functions require a compatible SLX-D+ receiver. Full ShowLink Ease functionality requires compatible SLX-D+ transmitters and receivers.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"slxd-compatibility-faq\"\u003e\n\u003ch3\u003eWill the New SLX-D+ H58 Work with Existing H57 and J54 Units?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e Australian SLX-D+ H58 components are compatible with original SLX-D H57 and J54 equipment, allowing you to upgrade gradually. Update all devices to the latest compatible firmware before pairing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExisting H57 or J54 transmitter + new H58 receiver:\u003c\/strong\u003e Select the matching band under \u003cstrong\u003eDevice Configuration \u0026gt; RF \u0026gt; RF Band\u003c\/strong\u003e, then IR-sync. All channels on that receiver use the selected band; H57 and J54 transmitters need separate receivers for simultaneous use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew H58 transmitter + existing H57 or J54 receiver:\u003c\/strong\u003e IR-sync within the receiver's supported frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete old and new systems together:\u003c\/strong\u003e Coordinate compatible frequencies across every active channel, with one active transmitter per receiver channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMixed-generation links do not provide ShowLink® Ease. AES-256 encryption requires SLX-D+ equipment at both ends, and legacy receivers do not gain SLX-D+ feedback reduction. Full functionality requires compatible SLX-D+ transmitters and receivers.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSee the \u003ca href=\"https:\/\/www.shure.com\/en-US\/docs\/guide\/slxd4plus\" target=\"_blank\" rel=\"noopener\"\u003eofficial Shure compatibility guide\u003c\/a\u003e for setup details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":41600982810682,"sku":"SHR-SLXD15+W85MH58","price":2099.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/shure-slxd15-wireless-digital-lavalier-system-w-wl185m-lavalier-microphone-h58-shr-slxd15w85mh58-gsus4-3747252.jpg?v=1792978454","url":"https:\/\/gsus4.com.au\/products\/shure-wireless-digital-lavalier-system-slxd1-tx-wl185m-mic-slxd5-rx-h58-520-606-mhz","provider":"Gsus4","version":"1.0","type":"link"}