{"product_id":"nu-x-solid-studio-ir-power-amp-simulator","title":"NUX Solid Studio IR \u0026 Power Amp Simulator","description":"\u003cbody\u003e\n\u003cp\u003e\u003cfont face=\"Verdana\" size=\"2\"\u003eThe New Era of Mic-ing!\u003cbr\u003e\n\u003cbr\u003e\nNUX Solid Studio was created and designed to address: limited gear\navailability, and the cumbersome transport reality of physical\namp\/speaker cabinets.\u003cbr\u003e\n\u003cbr\u003e\nNUX is proud to introduce the new Verdugo series Solid Studio IR \u0026amp;\nPower Amp simulator, a pedal version of the most classic amp\/cabinet\nscenarios including microphones and power amp tubes. Over many years\nof research, Solid Studio was specifically developed to fill the\nessential needs of discerning musicians and sound technicians,\nincluding the art of mic-ing instrument amplifiers on stage or in\nthe studio. Solid Studio provides ease-of-use, reliability,\nversatility, and, above all, incredible audio quality.\u003cbr\u003e\n\u003cbr\u003e\nVirtual mic-ing is achieved by choosing 1 cabinet and 1 microphone,\nand fine-tuning the position of the microphone using the mic\nposition switch. Plus, you can add the tube sound by engaging the\npower amp simulation.\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont face=\"Verdana\" size=\"2\"\u003eWhat's Inside?\u003cbr\u003e\nSolid Studio comes with 8 speaker cabinet simulations. All the cabinet models\ninside the Solid Studio are sounds great as original as the way it feels.\u003cbr\u003e\n\u003cbr\u003e\nAnd there are 8 microphone models you can combine with any cabinets. Also, you\ncan adjust microphone position for fine tuning.\u003cbr\u003e\n\u003cbr\u003e\nSolid Studio Power Amp Simulation produces a warm tube-like sound and you can\nchoose one of three power tubes for your essential sound needs.\u003cbr\u003e\n\u003cbr\u003e\nInput\/Outputs\u003cbr\u003e\nNUX Solid Studio has 6.35mm mono input with input signal level toggle switch\n(-10dB \/ +4dB). And it has 3 outputs; simulation dedicated (TRS) STEREO OUTPUT\nand DI OUT, and a bypass \"THRU\" output.\u003cbr\u003e\n\u003cbr\u003e\nConnection Tips\u003cbr\u003e\n\u003cbr\u003e\nSolid Studio offers a variety of connection ways and it can fit any desired spot\non your signal chain to use all the cabinet\/mic simulations efficient.\u003cbr\u003e\n\u003cbr\u003e\nGig Saver\u003cbr\u003e\n- You can place the Solid Studio at the end of your pedal board, and you can\nsend the simulated sound to the mixer while you can send your original signal to\nthe amp. It's an alternate option for amp \/ cabinet mic-ing on stage.\u003cbr\u003e\n\u003cbr\u003e\nSilent Connection\u003cbr\u003e\n- Direct connection to mixer or audio interface for recording. It gives more\nalternative cabinet options to record your favorite amplifier sound, especially\nif there is no chance to use any loudspeaker.\u003cbr\u003e\n\u003cbr\u003e\nAdvanced Connection\u003cbr\u003e\n- You can place the Solid Studio between the amp and the cabinet. You can send\nthe loud signal from the amp's cabinet output to the Solid Studio, and you can\nsend the original signal to the cabinet, simulated signal to the mixer\/audio\ninterface.\u003cbr\u003e\n\u003cbr\u003e\nWARNING\u003cbr\u003e\nWhen you use the advanced connection method:\u003cbr\u003e\nThe amplifier's speaker output must be connected to the Solid Studio's input by\na SPEAKER CABLE\u003cbr\u003e\nThe Solid Studio's input mode must be switched to +4 dB\u003cbr\u003e\nThe Solid Studio's THRU output must be connected to the speaker cabinet's input\nby a SPEAKER CABLE\u003cbr\u003e\nThe Solid Studio's output mode must be selected as SPK (SPEAKER) \u003cbr\u003e\n\u003cbr\u003e\nIR file support\u003cbr\u003e\nYou can easily emulate the sound of any guitar cabinet by loading different IR\n(Impulse response) files to NUX Solid Studio. \u003cbr\u003e\nTechnically, the Most Realistic IR Loader: Solid Studio\u003cbr\u003e\n\u003cbr\u003e\nThe Solid Studio’s IR resolution is 2048 samples and 46ms. Talking about\nnumbers, IR quality can be measured with the sample resolution and it’s scaled\nwith milliseconds. On this calculation, 1024 samples equal to 20ms capturing\nlength and this is the common quality standard in the market right now. And one\nof the well-known profiler gear offers 2048 samples \/ 40ms length.\u003cbr\u003e\n\u003cbr\u003e\nWhat makes the Solid Studio unique? It offers 46ms length which means it can\nperfectly read all the frequencies. Comparing the length, 20ms is already enough\nto capture a sound profile with an efficient result but it’s not enough to catch\nthe lower frequencies. That’s why the high-quality gears usually provide the\n40ms length - it means higher resolution and better quality.\u003cbr\u003e\n\u003cbr\u003e\n(If you are interested to read more advanced details click here)\u003cbr\u003e\n\u003cbr\u003e\nThe highest resolution quality limit of the IR is 50ms, It is the REAL sound not\nrealistic..\u003cbr\u003e\n\u003cbr\u003e\nConsidering all the process on the signal from your guitar to your ear, Solid\nStudio delivers the signal faster than blink of an eye with the greatest result.\nBecause of Solid Studio’s high-quality processor and perfect algorithm, high\nquality IR gear comes with the fastest speed. As a result; signal latency from\ninput to output is less than 1ms.\u003cbr\u003e\n\u003cbr\u003e\nMany of the IR equipment’s signal latency is around 2ms, also each pedal on the\nsignal chain also increases the signal path and that increases the latency too.\nFor example, the fastest multi-effect pedal needs 2ms to deliver the sound, if\nyou use an IR equipment with the multi-effect pedal, the latency will be 4ms and\na guitar player can ~barely~ feel that. If it’s more than 5ms it’s obviously\nslow and it’s not able to play.\u003cbr\u003e\n\u003cbr\u003e\nIR Capture\u003cbr\u003e\nYou can capture any speaker's profile easily with Solid Studio. Create your own\nIR file and save it.\u003cbr\u003e\n\u003cbr\u003e\nFirst, make all the connections (you can see the picture below)\u003cbr\u003e\n- Adjust the microphone position and connect to the Mic Preamp\u003cbr\u003e\n- Mic Preamp Output to Solid Studio Input\u003cbr\u003e\n- Solid Studio Output to Power Amp in \/ Return \u003cbr\u003e\n\u003cbr\u003e\nNow follow these steps;\u003cbr\u003e\n- Push and hold both footswitches on Solid Studio and plug in the power cable.\nSolid Studio will start running in IR capturing mode\u003cbr\u003e\n- Select the save position on Solid Studio, you can dial up any preset you want.\nChoose a speaker cabinet, mic position and a microphone (and please note it).\nThis will be your preset recall position as long as you keep the file here. 8\nSpeaker Cabinets x 3 Microphone positions x 8 Microphones = 192 dial up\npositions\u003cbr\u003e\n- Press CAB\/MIC footswitch ~ and it will capture the profile. Usually it takes\ncouple of seconds, just wait until the LED's stops blinking.\u003cbr\u003e\n\u003cbr\u003e\nYour very own Impulse Response file is ready to rock!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont face=\"Verdana\" size=\"2\"\u003e\n\u003cbr\u003e\n\u003c\/font\u003e\n\u003cspan style=\"color: rgb(246, 121, 28);\"\u003e\n\u003cstrong style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-family: Arial; \"\u003e\u003cspan class=\"textnorm\"\u003e\u003cspan style=\"font-family: Verdana; \"\u003e\u003cspan class=\"Apple\" style=\"text-align: left; text-transform: none; line-height: normal; text-indent: 0px; letter-spacing: normal; font-style: normal; font-variant: normal; word-spacing: 0px; white-space: normal; border-collapse: separate; orphans: 2; widows: 2\"\u003e\u003cfont size=\"2\"\u003e:\u003c\/font\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont face=\"Verdana\" size=\"2\"\u003e8 Speaker Cabinets\u003cbr\u003e\n8 Microphones and 3 Mic. Positions\u003cbr\u003e\n3 Power Amp Tubes\u003cbr\u003e\nMaster, Drive and Presence Controls (Power Amp)\u003cbr\u003e\nSimulation Dedicated Output and DI Out\u003cbr\u003e\nThru Output\u003cbr\u003e\nThru Output Modes (Line \/ Speaker)\u003cbr\u003e\nInput Level Switch (-10dB \/ +4dB)\u003cbr\u003e\nUSB Port for loading 3rd party IR files, software control and firmware update\u003c\/font\u003e\u003c\/p\u003e\n\u003c\/body\u003e","brand":"NUX","offers":[{"title":"Default Title","offer_id":41451225350202,"sku":"NXNSS5","price":289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/NU-X_Solid_Studio_IR___Power_Amp_Simulator_1780917964-01.jpg?v=1780917971","url":"https:\/\/gsus4.com.au\/products\/nu-x-solid-studio-ir-power-amp-simulator","provider":"Gsus4","version":"1.0","type":"link"}