{"title":"Junction Boxes","description":".","products":[{"product_id":"goodwood-audio-the-tx-interfacer","title":"Goodwood Audio The TX INTERfacer Pedalboard Junction Box w\/ Audio Transformer","description":"\u003cp\u003e  \u003ciframe width=\"1068\" height=\"601\" src=\"https:\/\/www.youtube.com\/embed\/HbFtAvYc7xY\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch1\u003eInput and output buffers.\u003cbr\u003eTwo types of summing.\u003cbr\u003eMaster mute.\u003cbr\u003eTuner send. \u003c\/h1\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/71ba4204659dd2809369f1570c41087a_original.jpg?v=1537894528\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThere are two versions of The Interfacer.  The TX Interfacer (gold print) and The Interfacer (white print).  Both versions have the same features and are made with the same components except that The TX Interfacer adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSumming\u003c\/strong\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003eThe Interfacer has two types of summing: Stereo Sum and Split Sum. To access these two modes, use the internal DIP switch to select which mode is best for you\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStereo Sum – This is the default mode The Interfacer ships with.  In this mode use stereo effects as normal. When summed, the left and right inputs are merged and the exact same signal is sent to the left and right outputs.\u003c\/li\u003e\n\u003cli\u003eSplit sum – Still use stereo effects as normal. When summed, the right input is ignored and the left input is split to both left and right outputs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/-9UML7OmG2s\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGround Lift \u0026amp; Phase Correction (The TX Interfacer only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/P_CWwGivoV4\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Interfacer TX comes with ground lift and phase correction for players that want to run more than one amp.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGround Lift – There are times when two amps are being used that an audible hum\/buzz can be heard coming out of your amps. When plugged into one amp only, the hum\/buzz is not present.  This is commonly referred to as a ground loop.  This happens when there is more than one path to earth.  To safely fix this common problem, a transformer is needed to isolate your second amp and create one path to ground.  Push the red ground lift button to isolate your right amp from your left. \u003c\/li\u003e\n\u003cli\u003ePhase Correction – Another common issue when running two amps is phase cancellation. Some amps are in phase in relation to each other and other amps are not.  When amps are out of phase with each other they are cancelling each other out.  This is most noticeable in the lower frequencies.  Normally this would mean you can’t use those amps together.  With the black phase correction button you can now put two amps that were out of phase, back in phase and working together.  To access this, turn on the transformer (red button) and flip the phase (black button).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Mute\u003c\/strong\u003e\u003cbr\u003eHit the foot switch on The Interfacer to mute your signal before it reaches your amps. No matter what craziness is happening on your board, the master mute has the final say on what does or doesn’t get sent to your amp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are two inputs on The Interfacer; a moveable buffered input and a passive input.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePassive Input – Best to use if you have effects on your board such as a vintage wah or fuzz that don’t quite sound the same with a buffer before them. After your last fuzz or wah pedal you can then plug into the buffered input of The Interfacer to make use of the buffer and dedicated tuner output. The passive input can also be used for off-board expression pedals and tap tempo.  Permanently connect either a TS or TRS cable from the passive send to a pedal that can receive expression or tap control and then patch an expression or tap pedal into the passive input.\u003c\/li\u003e\n\u003cli\u003eMoveable Buffered Input – The buffered input can be moved anywhere in your mono signal chain. Simply plug into the passive input, put all the pedals want you want before your buffer here. After the last pre-buffer pedal, plug into the buffered input to make use of the buffer and always on tuner output.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll Interfacers are made with high quality, durable components.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative plug to power!  100mA\u003cbr\u003eDimensions including all jacks and switches are: 127mm long x 77mm wide x 73mm high.\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12719388262423,"sku":"GW_INTERFACER-TX","price":389.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-the-tx-interfacer-pedalboard-junction-box-w-audio-transformer-gw-interfacer-tx-gsus4-654421.jpg?v=1744044740"},{"product_id":"goodwood-audio-the-tx-underfacer","title":"Goodwood Audio The TX UNDERfacer Pedalboard Junction Box w\/ Audio Transformer","description":"\u003cp\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/HbFtAvYc7xY\" height=\"601\" width=\"1068\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch1\u003eThe Underfacer is like The Interfacer but designed to go under an angled pedal board. \u003c\/h1\u003e\n\u003ch1\u003eUse The Underfacer to take care of all your \u003cspan style=\"text-decoration: underline;\"\u003einput\u003c\/span\u003e, \u003cspan style=\"text-decoration: underline;\"\u003emuting\u003c\/span\u003e, \u003cspan style=\"text-decoration: underline;\"\u003etuning\u003c\/span\u003e, \u003cspan style=\"text-decoration: underline;\"\u003esumming\u003c\/span\u003e, \u003cspan style=\"text-decoration: underline;\"\u003eisolating\u003c\/span\u003e and \u003cspan style=\"text-decoration: underline;\"\u003ephase correcting\u003c\/span\u003e needs without using any pedal board real-estate. \u003c\/h1\u003e\n\u003cp\u003eThere are two versions of The Underfacer.  The TX Underfacer (gold print) and The Underfacer (white print).  Both versions have the same features and are made with the same components except that The TX Underfacer adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Mute\u003c\/strong\u003e\u003cbr\u003eHit the mute pushbutton on The Underfacer to mute your signal before it reaches your amps. No matter what craziness is happening on your board, the master mute has the final say on what does or doesn’t get sent to your amp. \u003c\/p\u003e\n\u003cp\u003eYou can also control the master mute with RMT remotely on top of your pedal board. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSumming\u003c\/strong\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003eThe Interfacer has two types of summing: Stereo Sum and Split Sum. To access these two modes, use the internal DIP switch to select which mode is best for you.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStereo Sum – This is the default mode The Interfacer ships with.  In this mode use stereo effects as normal. When summed, the left and right inputs are merged and the exact same signal is sent to the left and right outputs.\u003c\/li\u003e\n\u003cli\u003eSplit sum – Still use stereo effects as normal. When summed, the right input is ignored and the left input is split to both left and right outputs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/-9UML7OmG2s\" height=\"641\" width=\"1140\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGround Lift \u0026amp; Phase Correction (The TX Interfacer only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/P_CWwGivoV4\" height=\"641\" width=\"1140\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe TX Underfacer comes with ground lift and phase correction for players that want to run more than one amp.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGround Lift – There are times when two amps are being used that an audible hum\/buzz can be heard coming out of your amps. When plugged into one amp only, the hum\/buzz is not present.  This is commonly referred to as a ground loop.  This happens when there is more than one path to earth.  To safely fix this common problem, a transformer is needed to isolate your second amp and create one path to ground.  Push the red ground lift button to isolate your right amp from your left. \u003c\/li\u003e\n\u003cli\u003ePhase Correction – Another common issue when running two amps is phase cancellation. Some amps are in phase in relation to each other and other amps are not.  When amps are out of phase with each other they are cancelling each other out.  This is most noticeable in the lower frequencies.  Normally this would mean you can’t use those amps together.  With the black phase correction button you can now put two amps that were out of phase, back in phase and working together.  To access this, turn on the transformer (red button) and flip the phase (black button).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eInput\u003cbr\u003e\u003c\/strong\u003eThe Underfacer comes with a buffered input. This means before your guitar sees the first pedal on your board you are sending a high impedance signal to your pedals, preserving your tone. The Underfacer also comes with an always on tuner out.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative plug to power! Current draw – 100mA\u003cbr\u003eDimensions including all jacks and push buttons are: 100mm long x 118mm wide x 34mm high.\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12720986095639,"sku":"UNDERFACER-TX","price":379.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-the-tx-underfacer-pedalboard-junction-box-w-audio-transformer-underfacer-tx-gsus4-885133.jpg?v=1744044740"},{"product_id":"goodwood-audio-the-output-tx","title":"Goodwood Audio The Output TX Stereo \/ Mono Summing w\/ Audio Transformer","description":"\u003cp\u003e \u003ciframe width=\"1068\" height=\"601\" src=\"https:\/\/www.youtube.com\/embed\/HbFtAvYc7xY\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch1\u003eOutput is designed for players that need a compact way to manage the outputs on their pedal board. \u003c\/h1\u003e\n\u003ch1\u003eOutput takes care of multiple stereo to mono summing options while fitting underneath your angled board, or even under another pedal.\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThere are two versions of Output.  Output TX (gold print) and Output (white print).  Both versions have the same features and are made with the same components except that Output TX adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSumming\u003c\/strong\u003e\u003cbr\u003eThere are two types of summing on Output: Stereo Sum and Split Sum. To access these two modes, use the internal DIP switch to select which mode is best for you.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStereo Sum – The default mode Output ships with. Use stereo effects as normal. When summed, the left and right inputs are merged and the exact same signal is sent to the left and right outputs.\u003c\/li\u003e\n\u003cli\u003eSplit sum – Still use stereo effects as normal. When summed, the right input of Output is ignored and the left input is split to both the left and right outputs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/-9UML7OmG2s\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGround Lift \u0026amp; Phase Correction (The TX Interfacer only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/P_CWwGivoV4\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTX Output comes with ground lift and phase correction for players that want to run more than one amp.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGround Lift – There are times when two amps are being used that an audible hum\/buzz can be heard coming out of your amps. When plugged into one amp only, the hum\/buzz is not present.  This is commonly referred to as a ground loop.  This happens when there is more than one path to earth.  To safely fix this common problem, a transformer is needed to isolate your second amp and create one path to ground.  Push the red ground lift button to isolate your right amp from your left. \u003c\/li\u003e\n\u003cli\u003ePhase Correction – Another common issue when running two amps is phase cancellation. Some amps are in phase in relation to each other and other amps are not.  When amps are out of phase with each other they are cancelling each other out.  This is most noticeable in the lower frequencies.  Normally this would mean you can’t use those amps together.  With the black phase correction button you can now put two amps that were out of phase, back in phase and working together.  To access this, turn on the transformer (red button) and flip the phase (black button).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003cp\u003eWe believe in providing quality products and services, which is why we endeavour to keep as many of the processes involved in building our products here in Sydney, Australia.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative power! Current draw – 50mA.\u003cbr\u003eDimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons).\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12721026433047,"sku":"OUTPUT-TX","price":299.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-the-output-tx-stereo-mono-summing-w-audio-transformer-output-tx-gsus4-261894.jpg?v=1744044740"},{"product_id":"goodwood-audio-the-isolator-tx","title":"Goodwood Audio The Isolator TX Transformer Isolated Split for Wet \/ Dry Effects","description":"\u003ch1\u003eIsolator is designed for players that want an isolated split on their pedal board. \u003c\/h1\u003e\n\u003ch1\u003eThis is ideally used for splitting your board into two lines, dry effects and wet effects, while giving muting options over both.  \u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThere are two versions of Isolator.  Isolator TX (gold print) and Isolator (white print).  Both versions have the same features and are made with the same components except that Isolator TX adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMuting \u003cbr\u003e\u003c\/strong\u003eIsolator comes with two options for muting. B Mute and Master Mute. With the pushbutton on the pedal you can easily access B mute. By connecting RMT, you can access both B mute (one output muted) with a quick tap of RMT’s foot switch.  You can also access master mute (both outputs muted) by holding RMT’s foot switch for 2 seconds.\u003c\/p\u003e\n\u003cp\u003e1.   B Mute – Allows you to send signal to a dry amp (output B) as well as your delays and reverbs (output A). In this mode you can mute your dry amp only, allowing instant access to just your wet (modulation, delay, reverb) effects.\u003c\/p\u003e\n\u003cp\u003e2.   Master Mute – This is helpful if you want to mute your entire board with trails. When muting in this mode both A and B outputs will be muted simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGround Lift \u0026amp; Phase Correction (Isolator TX only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/P_CWwGivoV4\" height=\"641\" width=\"1140\" allowfullscreen=\"\" allow=\"autoplay; encrypted-media\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTX Isolator comes with ground lift and phase correction for players that want to run more than one amp.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGround Lift – There are times when two amps are being used that an audible hum\/buzz can be heard coming out of your amps. When plugged into one amp only, the hum\/buzz is not present.  This is commonly referred to as a ground loop.  This happens when there is more than one path to earth.  To safely fix this common problem, a transformer is needed to isolate your second amp and create one path to ground.  Push the red ground lift button to isolate your right amp from your left. \u003c\/li\u003e\n\u003cli\u003ePhase Correction – Another common issue when running two amps is phase cancellation. Some amps are in phase in relation to each other and other amps are not.  When amps are out of phase with each other they are cancelling each other out.  This is most noticeable in the lower frequencies.  Normally this would mean you can’t use those amps together.  With the black phase correction button you can now put two amps that were out of phase, back in phase and working together.  To access this, turn on the transformer (red button) and flip the phase (black button).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWe believe in providing quality products and services, which is why we endeavour to keep as many of the processes involved in building our products here in Sydney, Australia.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative power! Current draw – 50mA.\u003cbr\u003eDimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons).\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12721110188055,"sku":"ISOLATOR-TX","price":269.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-the-isolator-tx-transformer-isolated-split-for-wet-dry-effects-isolator-tx-gsus4-887740.jpg?v=1744044740"},{"product_id":"goodwood-audio-rmt","title":"Goodwood Audio RMT Muting \u0026 Summing Switch for The Underfacer \u0026 The Isolator","description":"\u003ch1\u003eUse RMT to remotely control \u003ca href=\"https:\/\/goodwoodaudio.com\/product\/isolator\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIsolator’s\u003c\/a\u003e muting and \u003ca href=\"https:\/\/goodwoodaudio.com\/product\/theunderfacer\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnderfacer’s\u003c\/a\u003e mute and summing.\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Products And How To Use\u003c\/strong\u003e \u003cbr\u003eThe Underfacer – Use a TRS cable to plug RMT into The Underfacer. With RMT you can remotely access the master mute with a press of the soft switch and summing by holding the soft switch.\u003c\/p\u003e\n\u003cp\u003eIsolator – Use a TRS cable to plug RMT into Isolator. Now you can remotely access the muting functions.\u003c\/p\u003e\n\u003cp\u003eRMT overrides the mute and sum push buttons of The Underfacer and the mute push button of Isolator.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe believe in providing quality products and services, which is why we endeavour to keep as many of the processes involved in building our products here in Sydney, Australia.\u003c\/p\u003e\n\u003cp\u003eDimensions – 96mm L x 39mm W x 44mm H (including all jacks and switches).\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12721268785175,"sku":"GW-RMT","price":55.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-rmt-muting-summing-switch-for-the-underfacer-the-isolator-gw-rmt-gsus4-717833.jpg?v=1744044739"},{"product_id":"goodwood-audio-audition-send-return-signal-chain-for-auditioning","title":"Goodwood Audio Audition Send \u0026 Return Signal Chain For Auditioning","description":"\u003cp\u003e\u003ciframe width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/_iRGeUvZXmg\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eAny guitar player that has been using pedals for longer than 5 minutes knows that GAS (gear acquisition syndrome) is a real thing.  Since re-wiring your pedal board is not something you want to be doing every time you want to try a new pedal, Audition allows you to patch in a new pedal without having to re-wire your entire board.  Also use Audition to run your pedal board into an amps FX loop without having to re-patch your board. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Chain For Auditioning \u003c\/strong\u003e\u003cbr\u003eAudition can be placed anywhere in your signal chain. The first thing you need to decide is which types of pedals you will audition the most. If you are going to audition a lot of overdrive pedals, put Audition closer to the beginning of your signal chain. If you are going to audition modulation, delays and reverbs, put Audition closer to the end of your signal chain. If you are unsure, put Audition after your last overdrive and before your modulation effects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Chain For Using An Amp FX Loop\u003cbr\u003e\u003c\/strong\u003eIf you are going to be using an amp’s FX loop, place\u003c\/p\u003e\n\u003cp\u003e Audition after your last overdrive\/dry effect and route signal to the ‘In’ jack on Audition. Now the ‘Send’ jack goes to the input of your amp, the ‘Return’ jack connects to FX send on your amp, the ‘Out’ jack goes to your modulation effects and the output of your last modulation effect goes to the FX return on your amp.  If you don’t want to use the FX loop, simply unplug the send and return jacks and plug the last pedal on your board to the amp input.  \u003c\/p\u003e\n\u003cp\u003eIn this configuration you can still audition pedals as normal. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePush Button\u003c\/strong\u003e \u003cbr\u003eThe push button is on Audition for musicians running Audition underneath their angled pedal board. Since a lot of angled pedal boards come with side panel jacks, you can now patch Audition into the side panel jacks and turn Audition ON to try a new pedal, or turn Audition OFF to bypass the side panel jacks and pass signal un-interrupted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe power jacks on Audition are used to power the LED and more importantly to the pedal being auditioned. Plug in 9-18v on the In\/Out side of Audition and use the included DC cable to power the pedal you want to try.\u003cbr\u003eNOTE: make sure that the power supply you use to power Audition has enough amperage (mA) to power the pedal you are wanting to audition.\u003c\/p\u003e\n\u003cp\u003eWe believe in providing quality products and services, which is why we endeavour to keep as many of the processes involved in building our products here in Sydney, Australia.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative power! Current draw – 1mA plus the current draw of the pedal being auditioned.\u003cbr\u003eDimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons). \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAudio in\u003c\/li\u003e\n\u003cli\u003ePress to bypass audition loop\u003c\/li\u003e\n\u003cli\u003ePower pass through – centre negative only\u003c\/li\u003e\n\u003cli\u003eAudio out\u003c\/li\u003e\n\u003cli\u003eSend to pedal being auditioned\u003c\/li\u003e\n\u003cli\u003ePower pass through – centre negative only\u003c\/li\u003e\n\u003cli\u003eReturn from pedal being auditioned\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":12721278124055,"sku":"GW-AUDITION","price":98.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-audition-send-return-signal-chain-for-auditioning-gw-audition-gsus4-230268.jpg?v=1744044739"},{"product_id":"goodwood-wdw","title":"Goodwood Audio Wet Dry Wet Custom Junction Pedalboard Junction Box","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBy separating your pedalboard into a dry section (overdrives, distortion, compressor etc) and a modulation \/ wet section (chorus, delay, reverb etc) Goodwood Audio's WDW Custom Junction can route your signal in a number of exciting - Yes, exciting - ways.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis junction has a dedicated Dry, Left (wet) and Right (wet) output.  Since you can use 1, 2 or 3 of these outputs independently or simultaneously it means you can choose to route your board in any number of ways.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFurthermore you can mute your dry output (for instant access to ambient sounds) and use a master mute to kill all signal leaving your pedalboard. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Master Mute is great for tuning silently or changing guitars quickly and quietly. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e'Input' Jack:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003ePlug your guitar in here.  Simple. \u003c\/p\u003e\n\u003cp\u003eFrom the input signal is then sent to two places: \u003cbr\u003ea. Tuner out - Use this jack for an always on tuner output.  Your tuner will always be tuning weather your signal is live or muted. \u003cbr\u003eb. 'Board' - This jack is typically used to send signal to your first pedal.  Usually a fuzz, compressor or overdrive. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e'Dry.In':\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAfter your last dry effect (maybe your last overdrive, volume pedal, distortion) plug into this jack.  Signal is then going to be sent to two places: \u003cbr\u003ea. 'D.Out' - Plug your dry amp into this jack.  If you don't want a dry amp for a gig \/ session, simply don't plug anything in! \u003cbr\u003eb. 'To.Wet' - Plug your first modulation\/wet effect in here.  After this first wet effect you can then use it's outputs (or a later pedal in your wet chain) to split your signal to stereo. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e'L.In' and 'R.In'\u003c\/em\u003e\u003c\/span\u003e:\u003c\/p\u003e\n\u003cp\u003eThese are your Left and Right inputs.  From your last wet effect in either mono (use the L.In jack) or stereo (use both L\/R inputs) you can now complete the patching of this box.  From the Left and Right inputs, signal sends straight through to the other side of the box! \u003c\/p\u003e\n\u003cp\u003eSee 'Summing' for more info on how you can access summing options on your WDW Junction. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003eSumming\u003c\/strong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eBy default, your WDW Junction will ship in Stereo Sum mode.  When summed (pushbutton IN) the Left and Right inputs will be summed\/merged and then sent to both outputs.  \u003c\/p\u003e\n\u003cp\u003eIf you want to access Split Sum (the right input is muted and the left input is sent to both the Right and Left Output jacks), open up your WDW Junction and flip the DIP switches according to the directions on the PCB.  This PCB is attached to the Left and Right Input jacks.  \u003c\/p\u003e\n\u003cp\u003eNOTE: Regardless of the mode you choose, stereo (pushbutton OUT) operates the same.  The left input connects directly to left out and right in to right out.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1\/4\" Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eThere are three outputs on the WDW Junction: \u003cbr\u003ea. 'L.Out' - This is directly connected to the 'L.In' jack when in stereo.  Connect this jack to your left amp. \u003cbr\u003eb. 'R.Out' - Similar to the Left Out, the 'R.In' jack connects directly to the 'R.Out' jack.  Connect this to your right amp. \u003cbr\u003ec. 'D.Out' - This output will only receive signal from the first half of your pedalboard (dry effects only).  Connect this jack to your dry amp.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":39558232932410,"sku":"GW-WDW","price":699.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-wet-dry-wet-custom-junction-pedalboard-junction-box-gw-wdw-gsus4-820041.jpg?v=1738758760"},{"product_id":"limetone-irodori-nest","title":"Limetone IRODORI NEST Junction Box w\/ Irodori Buffer Active \u0026 Passive Preamp","description":"\u003ciframe title=\"人気製品が合体！？LimetoneAudio（ライムトーンオーディオ）の新製品irodori nest（イロドリ・ネスト）をタメシビキ！からの過去の人気ペダルを総振り返り！イチオシお気に入りは〇〇！？\" src=\"https:\/\/www.youtube.com\/embed\/CWtYlWWkkJo\" height=\"637\" width=\"1132\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"音質の劣化を防ぎ、楽器や演奏の迫力を残す？！Limetone Audioのirodori搭載のジャンクションボックス\" src=\"https:\/\/www.youtube.com\/embed\/BFwA1QzXpsA\" height=\"637\" width=\"1132\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" irodori=\"\"\u003e\u003c\/iframe\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe \u003cstrong\u003eIrodori Nest\u003c\/strong\u003e is a Junction box equipped with Limetone Audio's acclaimed Irodori buffer \/ preamp that is also controllable with a dip switch for Mellow \u0026amp; Vivid tone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne of the four input\/output systems is an Irodori buffered in\/out, you can use this in\/out as beginning of your pedal chain. Giving you a low impedance signal, preventing loss of sound quality throughout the signal chain.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe other thru jacks are designed with the highest Japanese components to minimize tonal loss. In addition, each thru terminal can be used as both TS and TRS plugs, allowing you to carry expression signals or stereo signals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIrodori's mode switch, vivid\/mellow, can be selected with an internal dip switch. The default is set to vivid but can be switched to mellow mode, which is a warm sound that is easy on the ears, if necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen the power supply to irodori nest is turned off, irodori becomes a true bypass state and can be used as a complete passive junction box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ground for each line is independent to prevent the occurrence of ground loops. (The ground of the chassis is connected only to the in\/out of the irodori part.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e*irodori's boost function is not installed.\u003c\/span\u003e\u003c\/p\u003e\n_________________________________________________________________\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection terminals: input, output, thru1 x 2, thru2 x 2, thru3 x 2, DC9Vin\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions: Width (W) 111 mm, Depth (D) 64 mm, Height (H) 43 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 265g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCurrent consumption: 5mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e","brand":"Limetone","offers":[{"title":"Default Title","offer_id":39723661230138,"sku":"LTIRODORINEST","price":399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/limetone-irodori-nest-junction-box-w-irodori-buffer-active-passive-preamp-ltirodorinest-gsus4-657224.jpg?v=1738758510"},{"product_id":"jet-pedals-red-sea","title":"Jet Pedals Red Sea Stereo Parallel Effects Splitter Wet\/Dry\/Wet","description":"\u003ciframe title=\"Red Sea - Official Demo Video\" src=\"https:\/\/www.youtube.com\/embed\/pEyyzS_ikBw\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"WET DRY WET in a BOX || @JET Pedals Red Sea Stereo Parallel FX Splitter\" src=\"https:\/\/www.youtube.com\/embed\/mdEclQyYcTI\" height=\"640\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"WET DRY WET made easy with the Jet Pedals RED SEA! (Demo)\" src=\"https:\/\/www.youtube.com\/embed\/vWyo2Z-ORSM\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"Jet Pedals Red Sea Wet Dry Wet\" src=\"https:\/\/www.youtube.com\/embed\/rmwf68YVsi4\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"Jet Pedals Red Sea Wet\/Dry\/Wet \u0026amp; Stereo Parallel Effects Splitter - Ambient Sketch and Demo\" src=\"https:\/\/www.youtube.com\/embed\/NzJjdGgilZo\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIntroducing the Red Sea, an all analog signal routing matrix designed for countless stereo and mono signal path routing options.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Red Sea gives you the ability to run a FULL Stereo wet dry wet rig using only 2 amps or just 2 signals to the FOH, while also giving you complete control over your Wet \u0026amp; Dry mix!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Red Sea also has two independent stereo FX loops. Use each FX loop to run stereo delay's and reverb's in parallel, where each effect does not interact with each other. Huge soundscapes can be achieved with washy reverbs and articulate delay repeats while being able to blend between each FX loops mix level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Red Sea can also do the following routing options:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWet | Dry utilising a single amp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eClean Wet | Dry | Wet (drives DO NOT run into wet effects)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWet | Dry | Wet with dual delays (one in the L channel \u0026amp; other in R channel)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eParallel Dual Amps (run dual amp modelers in FULL stereo)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConvert a tube amp's serial FX Loop to a parallel FX Loop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStereo and Mono analog dry through (avoid latency in digital pedals)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAnd the list goes on, only limited by your imagination...\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStereo or Mono In's \u0026amp; Out's\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStudio Grade Analog Buffers on all Inputs \u0026amp; Outputs\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLarge Blend Knob for Blending in a Live Setting\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolarity Reverse Switches for Changing the L\u0026amp;R Polarity on One of the FX Loops\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCast Aluminium Enclosure for Maximum Durability and Weight Reduction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower via Standard 9v 100ma Power Supply (not included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" color=\"#ff2a00\"\u003eDimensions: 4.82” x 2.62” x 1.425”\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JET Pedals","offers":[{"title":"Default Title","offer_id":39797359116346,"sku":"JET-REDSEA","price":489.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/jet-pedals-red-sea-stereo-parallel-effects-splitter-wetdrywet-jet-redsea-gsus4-782120.jpg?v=1738758414"},{"product_id":"jhs-summing-amp","title":"JHS Utility Summing Amp Junction Box","description":"\u003ciframe title=\"JHS: Switchback, Active A B Y and The Summing Amp Overview w\/ Andy Hillier\" src=\"https:\/\/www.youtube.com\/embed\/NrmYfjoDgdk\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"The JHS Summing Amp: Stereo to Mono guitar glory for your pedalboard problems\" src=\"https:\/\/www.youtube.com\/embed\/uqx4DiuhTKI\" height=\"720\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003ciframe title=\"JHS Summing Amp - Unboxing and Testing\" src=\"https:\/\/www.youtube.com\/embed\/kln1c73jjhg\" height=\"908\" width=\"1280\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThe JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output.  Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThis is perfect for putting effects in parallel so that they are not affected by one another. The Edge used this technique in the 80s with his delays. When you have a quarter note delay and a dotted eighth delay and you place them in parallel then sum them back together, the effect is that both delays come through more clearly and are not “delaying the delays”. This can also be used with overdrives so that they are not pushing each other as in series, but sit atop one another in parallel. Another use is combining fuzz and compression in parallel so the fuzz isn’t getting choked by the compression.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThe Summing Amp gives you the ability to use effects together in completely new ways that you may never have imagined and can open up new and inspiring sounds with your old effects. This simple little box takes two inputs and creates one output but it adds up to a whole lot more!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHE SUMMING AMP IS DESIGNED TO WORK WITH INPUT SIGNALS THAT ARE BELOW 14V INPUT GAIN. ANYTHING ABOVE 14V INPUT GAIN WILL CAUSE THE UNIT TO CLIP.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":39798690512954,"sku":"JHS-SUMAMP","price":145.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/jhs-utility-summing-amp-junction-box-jhs-sumamp-gsus4-581097.jpg?v=1738758407"},{"product_id":"earthquaker-devices-swiss-things","title":"Earthquaker Devices Swiss Things Pedalboard Reconciler","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eSwiss Things® combines two true-bypass Flexi-Switch® enabled effects loops, a Flexi-Switch® AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis is what you can do with it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-rte-list=\"default\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eUse as many pedals as you’d like without tone-suck\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eQuickly and easily bypass or engage all of your effects with one click\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eUse Flexi-Switch® Technology with every pedal in your setup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eEliminate volume pedal tone-suck by using any expression pedal to control volume\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eUse multiple amps without phase issues, ground loops, or extra noise\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eTidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\" id=\"block-3c6d22f1d237ce59f9d9\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003ch3\u003eExample Pedalboard Layout\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sqs-block image-block sqs-block-image sqs-text-ready\" data-block-type=\"5\" id=\"block-yui_3_17_2_1_1543855734245_35803\"\u003e\n\u003cdiv class=\"sqs-block-content\" id=\"yui_3_17_2_1_1673853747324_162\"\u003e\n\u003cdiv class=\"image-block-outer-wrapper\n          layout-caption-hidden\n          design-layout-inline\n          combination-animation-none\n          individual-animation-none\n          individual-text-animation-none\" data-test=\"image-block-inline-outer-wrapper\" id=\"yui_3_17_2_1_1673853747324_161\"\u003e\n\u003cfigure class=\"sqs-block-image-figure\n              intrinsic\" id=\"yui_3_17_2_1_1673853747324_160\"\u003e\n\u003cdiv class=\"image-block-wrapper\" data-animation-role=\"image\" id=\"yui_3_17_2_1_1673853747324_159\"\u003e\n\u003cdiv class=\"sqs-image-shape-container-element\n              \n          \n        \n              has-aspect-ratio\" id=\"yui_3_17_2_1_1673853747324_158\"\u003e\u003cimg class=\"thumb-image loaded\" data-src=\"https:\/\/images.squarespace-cdn.com\/content\/v1\/57cebe2c03596e075fca5f24\/1543858541686-J52798RAMJP854K0QKRB\/Swiss-Things-Pedalboard-Layout.jpg\" data-image=\"https:\/\/images.squarespace-cdn.com\/content\/v1\/57cebe2c03596e075fca5f24\/1543858541686-J52798RAMJP854K0QKRB\/Swiss-Things-Pedalboard-Layout.jpg\" data-image-dimensions=\"1500x1000\" data-image-focal-point=\"0.5,0.5\" data-load=\"false\" data-image-id=\"5c05696d70a6ada32eb85ae0\" data-type=\"image\" alt=\"Swiss-Things-Pedalboard-Layout.jpg\" data-image-resolution=\"2500w\" src=\"https:\/\/images.squarespace-cdn.com\/content\/v1\/57cebe2c03596e075fca5f24\/1543858541686-J52798RAMJP854K0QKRB\/Swiss-Things-Pedalboard-Layout.jpg?format=2500w\" data-mce-src=\"https:\/\/images.squarespace-cdn.com\/content\/v1\/57cebe2c03596e075fca5f24\/1543858541686-J52798RAMJP854K0QKRB\/Swiss-Things-Pedalboard-Layout.jpg?format=2500w\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"sqs-image-shape-container-element\n              \n          \n        \n              has-aspect-ratio\"\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 40 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 1 MΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 1 kΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFlexi-Switch® Technology\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\" id=\"block-yui_3_17_2_1_1548795238381_208713\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cp class=\"\" style=\"padding-left: 60px;\"\u003eThis device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/li\u003e\n\u003cli\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"\" style=\"padding-left: 60px;\"\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 60px;\"\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative centre barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":39821392609338,"sku":"M00001894","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/earthquaker-devices-swiss-things-pedalboard-reconciler-m00001894-gsus4-321017.jpg?v=1738758338"},{"product_id":"goodwood-audio-longline","title":"Goodwood Audio LongLine Pedalboard Friendly DI \/ Line Driver w\/ Isolation \u0026 Phase Control","description":"\u003ciframe width=\"770\" height=\"433\" src=\"https:\/\/www.youtube.com\/embed\/edCLriphGXc\" title=\"The Goodwood Audio Long Line Demo\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ciframe width=\"1243\" height=\"708\" src=\"https:\/\/www.youtube.com\/embed\/ivQ57OH5Bjc\" title=\"LongLine \u0026amp; RCV - Now Available!\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStereo Balanced Outputs, Global Summing, Ground Lift and Phase Correction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eLONGLINE OUTPUTS\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBoth the XLR outputs and 1\/4\" outputs are mirrored.  This means that the Left XLR and 1\/4\" output will see the same signal and the Right XLR and 1\/4\" output will see the same signal.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis also means the sum pushbutton will work across all outputs (XLR and 1\/4\"). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe XLR outputs on LongLine can be used for two main purposes regardless of what summing mode you are using: \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1. DI - You can use the XLR outputs as DIs and plug straight into a sound desk, interface, DAW.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2. LongLine - Tube amps sound great when they are pushed.  A lot of venues \/ studios don't have the ability to facilitate loud amp levels during gigs.  With LongLine you can send your guitar signal up to 300 feet (90 meters) to your amp without signal loss.  This means you can run your amp in a completely different room, or building and ideally turn it up as loud as you need to get the best tone out of your rig.  Use RCV to convert your signal back to unbalanced 1\/4\" right before your amps input. \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSUMMING\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eLongLine has two types of summing: Stereo Sum and Split Sum. To access these two modes, use the internal DIP switch to select which mode is best for you. You can also access Mix Mode with the DIP switches as well. The Sum switch is global - it acts across all four outputs - XLR and 1\/4\".\u003c\/p\u003e\n\u003cp\u003e1. Stereo Sum (DIP Sw UP) – This is the default mode LongLine ships with.  In this mode use stereo effects as normal. When summed, the left and right inputs are merged and the exact same signal is sent to the left and right outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2. Split sum (DIP Sw DOWN) – Still use stereo effects as normal. When summed, the right input is ignored and the left input is split to both left and right outputs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Mix Mode - With the left DIP UP and the right DIP DOWN you are in mix mode.  In this mode you can take signals from two different sources (Maybe a dry signal coming into the left input and a wet signal into the right input) and mix them.  This is different to summing, so please use this mode if you want to mix!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eGROUND LIFT \u0026amp; PHASE CORRECTION\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLongLine comes standard with ground lift and phase on the XLR outputs and optional ground lift and phase on the 1\/4\" outputs.  Assuming the option on 1\/4\" outputs has been chosen, the ground lift and phase push buttons will work on both the XLR and 1\/4\" outputs at the same time!\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGround Lift – A ground loop is never a welcome sound - a loud buzz when two amps are being used at certain venues - but it doesn't have to waste your time.  Simply push the black pushbutton on Interfacer and the ground loop will be eliminated! \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhase Correction – When using multiple amps it is possible that the amps being used are out of phase with each other.  One speaker is moving in while the other is moving out.  Correct this easily by pushing the black and red pushbuttons in - inverting the phase on one amp by 180 degrees. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eALL LONGLINES ARE MADE WITH HIGH QUALITY, DURABLE COMPONENTS.\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCurrent Draw\/Power: 75mA, Center Neg 2.1mm\u003cbr data-mce-fragment=\"1\"\u003eLongLine Dimensions: 120mm x 94mm x 34mm\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInput Impedance (Left In, Right In): 1Meg\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOutput Impedance (1\/4\" Outputs): 500ohms\u003cbr data-mce-fragment=\"1\"\u003eOutput Impedance (XLR Outputs): Low\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDI SPECS (When using LongLine as a DI) \u003cbr data-mce-fragment=\"1\"\u003eFreq. Response: 20Hz - 20kHz\u003cbr data-mce-fragment=\"1\"\u003eDynamic Range: 93dB\u003cbr data-mce-fragment=\"1\"\u003eTHD: 0.005%\u003cbr data-mce-fragment=\"1\"\u003eLow Output Impedance \u003c\/span\u003e\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":39853876936762,"sku":"GW-Longline","price":399.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-longline-pedalboard-friendly-di-line-driver-w-isolation-phase-control-gw-longline-gsus4-595683.jpg?v=1738758187"},{"product_id":"goodwood-audio-rcv","title":"Goodwood Audio RCV Stereo XLR Receiver Unit for LongLine","description":"\u003ciframe width=\"1243\" height=\"708\" src=\"https:\/\/www.youtube.com\/embed\/ivQ57OH5Bjc\" title=\"LongLine \u0026amp; RCV - Now Available!\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eRCV\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRCV is a passive box designed to receive signal from LongLine via its XLR jacks.  It can receive a stereo XLR signal from LongLine and convert it to unbalanced 1\/4\" outputs so you can plug your signal directly into your amp.  It is designed to work with a stereo \/ dual mono signal (sending to two amps) or a mono signal (sending to one amp) and is\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ecompletely passive\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e(no power required for RCV). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch4\u003eALL RCV UNITS ARE MADE WITH HIGH QUALITY, DURABLE COMPONENTS.\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eRCV Dimensions: 112mm x 61mm x 38mm\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":39853885980730,"sku":"GW-RCV","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/products\/goodwood-audio-rcv-stereo-xlr-receiver-unit-for-longline-gw-rcv-gsus4-265490.jpg?v=1738758185"},{"product_id":"goodwood-audio-isolator","title":"Goodwood Audio The Isolator Split for Wet \/ Dry Effects","description":"\u003ch1\u003eIsolator is designed for players that want an isolated split on their pedal board. \u003c\/h1\u003e\n\u003ch1\u003eThis is ideally used for splitting your board into two lines, dry effects and wet effects, while giving muting options over both.  \u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThere are two versions of Isolator.  Isolator TX (gold print) and Isolator (white print).  Both versions have the same features and are made with the same components except that Isolator TX adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMuting \u003cbr\u003e\u003c\/strong\u003eIsolator comes with two options for muting. B Mute and Master Mute. With the pushbutton on the pedal you can easily access B mute. By connecting RMT, you can access both B mute (one output muted) with a quick tap of RMT’s foot switch.  You can also access master mute (both outputs muted) by holding RMT’s foot switch for 2 seconds.\u003c\/p\u003e\n\u003cp\u003e1.   B Mute – Allows you to send signal to a dry amp (output B) as well as your delays and reverbs (output A). In this mode you can mute your dry amp only, allowing instant access to just your wet (modulation, delay, reverb) effects.\u003c\/p\u003e\n\u003cp\u003e2.   Master Mute – This is helpful if you want to mute your entire board with trails. When muting in this mode both A and B outputs will be muted simultaneously.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative power! Current draw – 50mA.\u003cbr\u003eDimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons).\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":40531608469562,"sku":"Isolator-1","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/goodwood-audio-the-isolator-split-for-wet-dry-effects-isolator-1-gsus4-754817.jpg?v=1738757437"},{"product_id":"goodwood-audio-the-isolator-split-for-wet-dry-effects-pre-loved","title":"Goodwood Audio The Isolator Split for Wet \/ Dry Effects PRE-LOVED (Damaged Print)","description":"\u003ch1\u003eIsolator is designed for players that want an isolated split on their pedal board. \u003c\/h1\u003e\n\u003ch1\u003eThis is ideally used for splitting your board into two lines, dry effects and wet effects, while giving muting options over both.  \u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThere are two versions of Isolator.  Isolator TX (gold print) and Isolator (white print).  Both versions have the same features and are made with the same components except that Isolator TX adds an audio transformer to give the option of ground lift and phase correction (read more below). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMuting \u003cbr\u003e\u003c\/strong\u003eIsolator comes with two options for muting. B Mute and Master Mute. With the pushbutton on the pedal you can easily access B mute. By connecting RMT, you can access both B mute (one output muted) with a quick tap of RMT’s foot switch.  You can also access master mute (both outputs muted) by holding RMT’s foot switch for 2 seconds.\u003c\/p\u003e\n\u003cp\u003e1.   B Mute – Allows you to send signal to a dry amp (output B) as well as your delays and reverbs (output A). In this mode you can mute your dry amp only, allowing instant access to just your wet (modulation, delay, reverb) effects.\u003c\/p\u003e\n\u003cp\u003e2.   Master Mute – This is helpful if you want to mute your entire board with trails. When muting in this mode both A and B outputs will be muted simultaneously.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT – Use only 9vDC centre negative power! Current draw – 50mA.\u003cbr\u003eDimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons).\u003c\/p\u003e","brand":"Goodwood Audio","offers":[{"title":"Default Title","offer_id":40531611418682,"sku":"Isolator-2","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/goodwood-audio-the-isolator-split-for-wet-dry-effects-pre-loved-damaged-print-isolator-2-gsus4-495187.jpg?v=1738757437"},{"product_id":"earthquaker-devices-flexi-loop","title":"Earthquaker Devices Flexi Loop Utility Series","description":"\u003cp\u003eUsing an effect loop switcher on your pedalboard allows you to easily remove all your effects from the signal path creating a path of least resistance to maintain full tonal integrity when they aren’t in use. Using a dual effect loop with Flexi-Switch® Technology allows you to create two distinct loops of effects and then introduce or remove them all on the fly with ease! \u003c\/p\u003e\n\u003cp\u003eYou aren’t just limited to using the Flexi Loops as a loop switcher! You can use one channel as a tuner out\/mute or even a plain old mute. Use the sends to run out to different sources and easily select between them!\u003c\/p\u003e\n\u003cp\u003eThe Flexi Loops uses high quality, soft touch momentary switches for durability and quick action to ensure a lifetime of switching enjoyment. This device is entirely passive and there is no circuitry in the signal path but it will require power for the relays to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.75 x 2.75 x 2.25 in. (121 x 70 x 57 mm)\u003cbr\u003e\u003cstrong\u003eCurrent Draw\u003c\/strong\u003e: 25 mA\u003cbr\u003e\u003cstrong\u003eFlexi-Switch® Technology\u003c\/strong\u003e:\u003cbr\u003eThis device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp\u003e• For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp\u003e• For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay-based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1543855734245_35803\" data-block-type=\"5\" class=\"sqs-block image-block sqs-block-image sqs-text-ready\"\u003e\n\u003cdiv id=\"yui_3_17_2_1_1673853747324_162\" class=\"sqs-block-content\"\u003e\n\u003cdiv id=\"yui_3_17_2_1_1673853747324_161\" data-test=\"image-block-inline-outer-wrapper\" class=\"image-block-outer-wrapper\n          layout-caption-hidden\n          design-layout-inline\n          combination-animation-none\n          individual-animation-none\n          individual-text-animation-none\"\u003e\n\u003cfigure id=\"yui_3_17_2_1_1673853747324_160\" class=\"sqs-block-image-figure\n              intrinsic\"\u003e\n\u003cdiv id=\"yui_3_17_2_1_1673853747324_159\" data-animation-role=\"image\" class=\"image-block-wrapper\"\u003e\n\u003cdiv class=\"sqs-image-shape-container-element\n              \n          \n        \n              has-aspect-ratio\"\u003e\n\u003cp style=\"padding-left: 60px;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":40713183592506,"sku":"M00010332","price":219.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-flexi-loop-utility-series-m00010332-gsus4-983088.jpg?v=1738757143"},{"product_id":"earthquaker-devices-aby-box","title":"Earthquaker Devices ABY Box Utility Series","description":"\u003cp\u003eThe EarthQuaker Devices® Passive ABY Box is the perfect solution if you can’t decide when and where you would like your signal to go. In its most basic form, this passive little box is commonly used to run a single input out to two destinations and lets you choose between using either individually or both at the same time. The most common problem an ABY is used to solve is one input being sent out to two amplifiers, but it doesn’t have to stop there! Because of its completely passive circuitry it can also be used in reverse to choose between two inputs to a single output. Use it to simultaneously run two different instruments to one input! An oboe and a bass, a keyboard and a harmonica, a lute and a modular synth… you know, whatever! This compact little device has a small footprint and won’t take up much real estate on your board and is built using high quality parts that will withstand years of use and keep going.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.4375 x 2.875 x 1.875 in. (113 x 73 x 48 mm)\u003cbr\u003e\u003cstrong\u003eCurrent Draw\u003c\/strong\u003e: 60 mA\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":40713184542778,"sku":"M00010329","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-aby-box-utility-series-m00010329-gsus4-768743.jpg?v=1738757144"},{"product_id":"earthquaker-devices-buffer-splitter","title":"Earthquaker Devices Buffer Splitter Utility Series","description":"\u003cp\u003eA buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. The EarthQuaker Devices Buffer\/Splitter uses the same great high 1Mohm input impedance and low 100 ohm output impedance found in our Buffer\/Preamp to restore your tonal integrity! This buffer is designed to both maintain high end and give your low end a subtle, yet powerful, little kick for some added dimension!\u003c\/p\u003e\n\u003cp\u003eWhat’s better than a single output buffer? A dual output buffer, that’s what! Use the EarthQuaker Devices Buffer\/Splitter to split your signal into two and send them anywhere you like! Two amps! Turn a mono signal into a stereo signal! Send one output to your effects and use the other as a dry-through! Remove your tuner from the signal path… you get the idea!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)\u003cbr\u003e\u003cstrong\u003eCurrent Draw\u003c\/strong\u003e: 15 mA\u003cbr\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e: 1 MΩ\u003cbr\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e: 100 Ω\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"sqs-block image-block sqs-block-image sqs-text-ready\" data-block-type=\"5\" id=\"block-yui_3_17_2_1_1543855734245_35803\"\u003e\n\u003cdiv class=\"sqs-block-content\" id=\"yui_3_17_2_1_1673853747324_162\"\u003e\n\u003cdiv class=\"image-block-outer-wrapper\n          layout-caption-hidden\n          design-layout-inline\n          combination-animation-none\n          individual-animation-none\n          individual-text-animation-none\" data-test=\"image-block-inline-outer-wrapper\" id=\"yui_3_17_2_1_1673853747324_161\"\u003e\n\u003cfigure class=\"sqs-block-image-figure\n              intrinsic\" id=\"yui_3_17_2_1_1673853747324_160\"\u003e\n\u003cdiv class=\"image-block-wrapper\" data-animation-role=\"image\" id=\"yui_3_17_2_1_1673853747324_159\"\u003e\n\u003cdiv class=\"sqs-image-shape-container-element\n              \n          \n        \n              has-aspect-ratio\"\u003e\n\u003cp style=\"padding-left: 60px;\" data-mce-style=\"padding-left: 60px;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":40713185558586,"sku":"M00010331","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-buffer-splitter-utility-series-m00010331-gsus4-183992.jpg?v=1738757144"},{"product_id":"earthquaker-devices-ab-box","title":"Earthquaker Devices A\/B Box Both Directions Utility Series","description":"\u003cp\u003eThe EarthQuaker Devices® A\/B Box is a simple, compact tool that lets you choose between two of almost anything. Due to its completely passive design, there is no circuitry between the input and outputs, meaning it can be used in both directions. Use it to switch between two amps! Switch between two channels on a multi-channel amp! Use it as a tuner out\/mute switch! Switch between two instruments! Run a dry path and a wet path! The time to passively choose is now!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)\u003cbr\u003e\u003cstrong\u003eCurrent Draw\u003c\/strong\u003e: 10 mA\u003cbr\u003e\u003cstrong\u003ePowe\u003c\/strong\u003er:\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":40713186246714,"sku":"M00010328","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-ab-box-both-directions-utility-series-m00010328-gsus4-129338.jpg?v=1738757143"},{"product_id":"earthquaker-devices-buffer-preamp","title":"Earthquaker Devices Buffer Preamp Utility Series","description":"\u003cp\u003eA buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. With its high 1Mohm input impedance and low 100 ohm output impedance, the EarthQuaker Devices® Buffer\/Preamp will restore your tonal integrity and give you back the clear and dynamic signal you deserve and your amp craves. Want more? Not only will it restore high end loss, this device has a little trick up its sleeve that will also give your low end a subtle, yet powerful, little kick for some added dimension. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)\u003cbr\u003e\u003cstrong\u003eCurrent Draw: \u003c\/strong\u003e15 mA\u003cbr\u003e\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 1 MΩ\u003cbr\u003e\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 100 Ω\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":40713187459130,"sku":"M00010330","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-buffer-preamp-utility-series-m00010330-gsus4-119770.jpg?v=1738757144"},{"product_id":"earthquaker-devices-easy-listening-65-deluxe-amp-simulator-w-headphone-output","title":"Earthquaker Devices Easy Listening 65' Deluxe Amp Simulator w\/ Headphone Output","description":"\u003ciframe width=\"692\" height=\"389\" src=\"https:\/\/www.youtube.com\/embed\/ObGWBRak0Hw\" title=\"Easy Listening Analog Amp Simulator\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003cdiv\u003e\n\u003cp\u003eWith its finely tuned preamp circuitry and sweet analogue cabinet simulation, Easy Listening delivers a big, lush sound with zero latency and no harsh digital artifacts. Think of it as the perfect marriage of vintage tone and modern convenience, offering all the high headroom and low noise of an actual tube amp but small enough to fit in your pocket. No menu diving, no IR loading, and nothing else getting in-between you and your tone.\u003c\/p\u003e\n\u003cp\u003eInternally, it's meticulously voiced to capture the soul of one of the favourite classic American guitar amps—a '65 Deluxe—with all the harmonic complexity guitar players crave. Its all-analogue circuitry provides a more immediate feel with rich low-end resonance, slightly scooped mids, and that crystalline top end chime that makes electric guitars sing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalogue Amp Simulator\u003c\/li\u003e\n\u003cli\u003eFaithfully replicates a '65 Deluxe Amplifier with controls set to noon\u003c\/li\u003e\n\u003cli\u003eAll analogue design\u003c\/li\u003e\n\u003cli\u003eNo menu diving, no IR loading, and nothing else getting in-between you and your tone\u003c\/li\u003e\n\u003cli\u003eHuge sound in a compact design\u003c\/li\u003e\n\u003cli\u003eCan be used with DAWs for ampless recording\u003c\/li\u003e\n\u003cli\u003eSimple layout design with just one volume control\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"manufacturer-site\"\u003e\n\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.earthquakerdevices.com\/easy-listening\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41188487397434,"sku":"M00011756","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-easy-listening-65-deluxe-amp-simulator-w-headphone-output-m00011756-gsus4-1794042.jpg?v=1768598350"},{"product_id":"earthquaker-devices-1-to-4-splitter-utility-series","title":"Earthquaker Devices 1-to-4 Splitter Utility Series","description":"\u003cp\u003eWe have crafted the One to Four Splitter to route your next musical adventure and help you create sounds you never thought possible. This One to Four Splitter allows the user to take one input and send it through four buffered outputs for unlimited creative potential. Use it to run out to four amps to play in quadraphonic sound and blow people’s minds. Send a clean signal to your DAW and another through your normal signal chain to have a clean back up while recording. Run 2 parallel stereo signal paths! Use our One to Four splitter together with our Four to One Mixer and create wild parallel signal chains! Use our Buffer\/Splitter and run 2 x One to Four Splitters to have 8 parallel paths!!!\u003c\/p\u003e\n\u003cp\u003eThis device features a unity gain buffer on each buffer output for maximum punch and clarity. These buffered outputs have a flat frequency response with a high 1 Mohm input impedance and a low 100-ohm output impedance. This means that your signal won’t lose any quality and will sound just like you intended. Even long cable runs will be no match for the One to Four Splitter. Like our other products, our One to Four Splitter is made at our factory in Akron, Ohio and is backed up with our limited lifetime warranty.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered outputs for creative versatility\u003c\/li\u003e\n\u003cli\u003eUnity gain buffer ensures punch and clarity\u003c\/li\u003e\n\u003cli\u003eHigh 1 Mohm input impedance retains signal quality\u003c\/li\u003e\n\u003cli\u003eLow 100-ohm output impedance reduces loss\u003c\/li\u003e\n\u003cli\u003eIdeal for quadraphonic sound with four amps\u003c\/li\u003e\n\u003cli\u003ePerfect for clean signal routing to DAW\u003c\/li\u003e\n\u003cli\u003eManufactured in Akron, Ohio for quality assurance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41417273409594,"sku":"M00011626","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/earthquaker-devices-1-to-4-splitter-utility-series-m00011626-gsus4-1494412.jpg?v=1778825067"}],"url":"https:\/\/gsus4.com.au\/en-us\/collections\/junction-boxes\/type_custom-order.oembed","provider":"Gsus4","version":"1.0","type":"link"}