{"title":"Drawmer Electronics","description":"\u003cp class=\"p1\"\u003eDrawmer is a British audio company founded in 1981 in Yorkshire, England by Ivor Drawmer. The brand specialises in high-quality signal processors, compressors and channel strips, with a strong focus on precision, reliability and warm analogue sound. Drawmer’s flagship 1979 Channel Strip is a versatile processor that combines preamp, EQ and dynamics control in one unit, giving engineers the ability to shape their sound with both accuracy and character.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDrawmer has built a strong reputation for outstanding sound quality, innovative design and professional-grade reliability. Known for its compressors, noise gates, preamps and equalisers, the company continues to be trusted by producers, engineers and musicians around the world. From recording and mixing to mastering and live sound reinforcement, Drawmer remains one of the most respected names in professional studio gear.\u003c\/p\u003e","products":[{"product_id":"drawmer-1960-dual-tube-pre-amp-compressor","title":"Drawmer 1960 Dual Channel Tube Preamp \/ Compressor","description":"\u003cp\u003eThe Drawmer 1960 is an all time favourite recording tool with studio engineers. It features a pair of quality fully featured microphone and instrument level preamp stages followed by a pair of classic soft knee tube compressors. This unit is very versatile and is the ultimate recording tool in the studio. Made in the UK.\u003c\/p\u003e \u003cp\u003eThere is little doubt in the minds of many engineers and producers that vacuum tubes possess a unique sound quality providing a “warmer, more alive” sound. Combining eight active tube stages and the low noise and reliability of solid state electronics, the Drawmer 1960 provides the ultimate direct interface between the sound source and the recording medium. The Drawmer 1960 is a two channel unit with each channel comprised of a completely natural sounding “soft knee” vacuum tube compressor and an extremely low noise microphone pre-amplifier with switchable 48 volt phantom power. A further auxiliary instrument pre-amp with EQ is also provided. This powerful combination of the classic valve circuit, offering unsurpassed tonality, and the low noise balanced microphone input with up to 60dB of gain has allowed engineers throughout the world to exploit the full potential of high performance condenser microphones. An example of this would be the direct to digital stereo recording of live classical music without the necessity of a mixing console.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447173390394,"sku":"DRA-1960","price":3199.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1960_Dual_Tube_Pre-AmpCompressor_1780726327-01.jpg?v=1780726332"},{"product_id":"drawmer-1961-dual-channel-tube-equaliser","title":"Drawmer 1961 Dual Channel Tube Equaliser","description":"\u003cp\u003eThe Drawmer 1961 gives you 2 channels of 4 discrete bands of fully parametric tube EQ plus a pair of high and low pass filters making this unit a very powerful EQ. Each band can be punched in and out independently on each channel. Being tube this unit exhibits plenty of tone and tube character making it a very musical sounding EQ.\u003c\/p\u003e \u003cp\u003eInput level :\u003c\/p\u003e\u003cp\u003eA variable input level of -20dB to +20dB ensures compatibility with a wide range of input source material and enables the user to optimize signal level and drive the tubes ‘soft’ or ‘hot’ as required. LED bargraph displays give a clear indication of the input signal level.\u003c\/p\u003e\u003cp\u003eHigh Pass Filter :\u003c\/p\u003e\u003cp\u003eA variable 12dB\/Octave roll-off filter adjustable from – 15Hz to 500Hz section enables the user to remove unwanted low frequencies and sub-sonic noise.\u003c\/p\u003e\u003cp\u003eEqualization :\u003c\/p\u003e\u003cp\u003eEach channel of the 1961 has four main equalizer sections with six carefully chosen overlapping frequencies and a separate tube stage for increased harmonic clarity. Each section also includes variable band width from 0.3 Octave to 3 Octaves and +18dB of Cut and Boost. BASS frequencies (Hz) 20, 32, 50, 80, 125, 200. LO-MID frequencies (Hz) 100, 180, 250, 400, 650, 1K. HI-MID frequencies (kHz) 0.5, 0.8, 1.2, 2.0, 3.2, 5.0. TREBLE frequencies (kHz) 2.5, 4, 6,10,15, 25.\u003c\/p\u003e\u003cp\u003eLow Pass Filter :\u003c\/p\u003e\u003cp\u003eA variable 12dB\/Octave roll-off filter adjustable from 2.5kHz to 56kHz enables the user to remove high frequency interference or to band limit excessively high levels of high frequencies.\u003c\/p\u003e\u003cp\u003eOutput Stage :\u003c\/p\u003e\u003cp\u003eTwo additional tube stages in the output section of each channel allow the user to achieve ‘soft clipping’ by adjusting the input level control whilst visually monitoring the effect upon the ‘Soft’ and ‘O\/L’ (Overload) LED’s.\u003c\/p\u003e\u003cp\u003eBypass :\u003c\/p\u003e\u003cp\u003eIn addition to a master bypass switch, each of the parametric\/shelving filters has its own separate bypass switch, making the 1961 very straight forward to set up. It allows instant A-B comparison and also enables the tube output stages to be used to add tube coloration without EQ simply by leaving each channel switched to ‘In’ and each individual EQ sections switched to ‘Out’. The master bypass switch for channel bypasses all the filter sections as well as the output stage vacuum tube circuitry.\u003c\/p\u003e\u003cp\u003eOperating Level :\u003c\/p\u003e\u003cp\u003eLevels of -10dBu and +4dBu are selectable using a rear panel switch.\u003c\/p\u003e\u003cp\u003eInsert Connections :\u003c\/p\u003e\u003cp\u003eInsert point 1\/4″ jack connectors on the rear panel enable direct connection to the Side chain or Insert points of the Drawmer 1960 Mic Pre-Amp\/ Vacuum Tube Compressor. The 1961 and 1960, when ‘interlinked’, produce a powerful package for recording signals direct to tape; gain control, EQ \u0026amp; compression can be applied to mic\/line level signals without having to go via a mixing console.\u003c\/p\u003e\u003cp\u003eInputs and outputs :\u003c\/p\u003e\u003cp\u003eThe 1961 is provided with balanced inputs and outputs on XLR connections.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447173587002,"sku":"DRA-1961","price":3499.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1961_Dual_Channel_Tube_Equaliser_1780726339-01.jpg?v=1780726344"},{"product_id":"drawmer-1968-dual-tube-compressor","title":"Drawmer 1968 Dual Channel Tube \/ FET Compressor","description":"\u003cp\u003eThe Drawmer 1968 is a i unit dual channel stereo tube compressor that features a pair of big VU meters to monitor level and gain reduction. The 1968 will operate in both FET or Tube mode or a blend of both to give you a great cross section of tonal flavour.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e2 Channel Tube\/FET Compressor. 2 soft-knee compressors with variable threshold, attack, release and output gain. Switchable BIG and BIGGER control on each channel. Dual mono or true stereo link operation. Side chain access and side chain listen facility. VU metering of gain reduction and output levels. Switchable +10dB mode on VU re-scales the meter for users working at ‘hot’ output levels. VU red warning glow to signify ‘approaching clipping’. Balanced +4dB XLR in\/outs.\u003c\/li\u003e\n\u003cli\u003e2 Channel Tube\/FET Compressor.\u003c\/li\u003e\n\u003cli\u003e2 soft-knee compressors with variable threshold, attack, release and output gain.\u003c\/li\u003e\n\u003cli\u003eSwitchable BIG and BIGGER control on each channel.\u003c\/li\u003e\n\u003cli\u003eDual mono or true stereo link operation.\u003c\/li\u003e\n\u003cli\u003eSide chain access and side chain listen facility.\u003c\/li\u003e\n\u003cli\u003eVU metering of gain reduction and output levels.\u003c\/li\u003e\n\u003cli\u003eSwitchable +10dB mode on VU re-scales the meter for users working at ‘hot’ output levels.\u003c\/li\u003e\n\u003cli\u003eVU red warning glow to signify ‘approaching clipping’.\u003c\/li\u003e\n\u003cli\u003eBalanced +4dB XLR in\/outs.\u003c\/li\u003e\n\u003cli\u003eExpanded the BIG to include BIGGER – setting the filters to 75Hz and 150Hz.\u003c\/li\u003e\n\u003cli\u003eAdded internal jumpers that can be configured to remove the soft clip section.\u003c\/li\u003e\n\u003cli\u003eAdded internal jumpers to make the output hotter by 6dB, if required.\u003c\/li\u003e\n\u003cli\u003eImprovement have been made to the PSU to lower the noise floor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447173750842,"sku":"DRA-1968","price":2699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1968_Dual_Tube_Compressor_1780726350-01.jpg?v=1780726355"},{"product_id":"drawmer-1969-dual-tube-pre-amp-compressor","title":"Drawmer 1969 Dual Channel Tube Preamp \/ Compressor","description":"\u003cp\u003eWhat sets the drawmer 1960 apart from the rest is its tone and flexibility. Use it when recording then use it again at mixdown. First up you get 2 discrete Drawmer variable gain preamps followed by a pair of classic Drawmer soft-knee tube compressors – this gives the 1960 a warm forgiving character. The 1960 has 2 nice big VU’s to meter gain reduction and output level and a stereo link for using on a stereo buss at mixdown.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e2 mic\/line pre-amps with variable gain, 48V phantom power, filters and phase reverse.\u003c\/li\u003e\n\u003cli\u003eInstrument tube pre-amp with variable gain, EQ, phase reverse and brightness boost.\u003c\/li\u003e\n\u003cli\u003e2 soft-knee tube compressors with variable threshold, attack, release and output gain.\u003c\/li\u003e\n\u003cli\u003eTrue stereo link operation with BIG position for retaining bass frequencies.\u003c\/li\u003e\n\u003cli\u003eSide chain access and side chain listen facility.\u003c\/li\u003e\n\u003cli\u003eVU metering of gain reduction and output levels.\u003c\/li\u003e\n\u003cli\u003eIndividual +4dB\/-10dB inserts \/ Balanced +4dB XLR input\/output connectors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447173980218,"sku":"DRA-1969","price":3299.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1969_Dual_Tube_Pre-AmpCompressor_1780726361-01.jpg?v=1780727373"},{"product_id":"drawmer-1973-multiband-fet-compressor","title":"Drawmer 1973 Multiband Stereo FET Compressor","description":"\u003cp\u003eThe Drawmer 1973 Stereo FET Multiband compressor allows you to push into higher ratios without adverse pumping that you would typically get from a single band compressor. This compressor is ideal for mastering jobs or on a stereo buss at mixdown.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eStandard intuitive controls such as Threshold, Gain, Switched Attack \u0026amp; Release with Gain Reduction Metering on Each Band.\u003c\/li\u003e\n\u003cli\u003eStandard intuitive controls such as Threshold, Gain, Switched Attack \u0026amp; Release with Gain Reduction Metering on Each Band.\u003c\/li\u003e\n\u003cli\u003eFast Reacting Soft Knee F.E.T. Design with excellent Left\/Right Tracking across the Full Range of compression.\u003c\/li\u003e\n\u003cli\u003eFast Reacting Soft Knee F.E.T. Design with excellent Left\/Right Tracking across the Full Range of compression.\u003c\/li\u003e\n\u003cli\u003eVariable Wet\/Dry Mix plus Output Gain Knobs give a ‘Parallel Compression’ function without the need for external mixing devices, providing Complete and Effortless Control over the amount of compression used and Output Levels.\u003c\/li\u003e\n\u003cli\u003eVariable Wet\/Dry Mix plus Output Gain Knobs give a ‘Parallel Compression’ function without the need for external mixing devices, providing Complete and Effortless Control over the amount of compression used and Output Levels.\u003c\/li\u003e\n\u003cli\u003eVariable Band Split Filters at a 6dB Per Octave slope with Switch-able Mute and Bypass on Each Band make ‘Tuning In’ to a Frequency Simple.\u003c\/li\u003e\n\u003cli\u003eVariable Band Split Filters at a 6dB Per Octave slope with Switch-able Mute and Bypass on Each Band make ‘Tuning In’ to a Frequency Simple.\u003c\/li\u003e\n\u003cli\u003e‘Big’ and ‘Air’ Modes Help to preserve the Very Deep Lows and Enhance the Sparkling Highs.\u003c\/li\u003e\n\u003cli\u003e‘Big’ and ‘Air’ Modes Help to preserve the Very Deep Lows and Enhance the Sparkling Highs.\u003c\/li\u003e\n\u003cli\u003eTwo Analogue V.U. Meters with Switchable +10dB Meter Rescale Modes and a Switchable ‘Peak’ mode to Display Fast Transients Not Normally Seen on Conventional V.U.s.\u003c\/li\u003e\n\u003cli\u003eTwo Analogue V.U. Meters with Switchable +10dB Meter Rescale Modes and a Switchable ‘Peak’ mode to Display Fast Transients Not Normally Seen on Conventional V.U.s.\u003c\/li\u003e\n\u003cli\u003eDedicated Gain Reduction Meters On Each Band.\u003c\/li\u003e\n\u003cli\u003eDedicated Gain Reduction Meters On Each Band.\u003c\/li\u003e\n\u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch\u003c\/li\u003e\n\u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch\u003c\/li\u003e\n\u003cli\u003eClassic Drawmer Build Quality with Rugged Steel Chassis and Aluminium Front Panel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447174176826,"sku":"DRA-1973","price":2699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1973_Multiband_FET_Compressor_1780726375-01.jpg?v=1780726380"},{"product_id":"drawmer-1978-stereo-fet-compressor","title":"Drawmer 1978 Stereo FET Compressor","description":"\u003cp\u003eThe Drawmer 1978 is a great compressor to use on a buss at mixdown. Being an FET design it is super fast and clean but also has a nice vintage character. The compressor also feature a very nice stereo tone shaping EQ section. All drawmer product is made in the UK.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eFast Reacting Stereo FET Design compressor with excellent Left\/Right Tracking across the Full Range of compression and in a 1u rack mount housing.\u003c\/li\u003e\n\u003cli\u003eFast Reacting Stereo FET Design compressor with excellent Left\/Right Tracking across the Full Range of compression and in a 1u rack mount housing.\u003c\/li\u003e\n\u003cli\u003eThreshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuitive control over the audio. Anyone that knows how to use a compressor can operate the 1978.\u003c\/li\u003e\n\u003cli\u003eThreshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuitive control over the audio. Anyone that knows how to use a compressor can operate the 1978.\u003c\/li\u003e\n\u003cli\u003e4 character switches provide a multitude of compression flavour combinations that allow the 1978 to take on the characteristics of other compressors.\u003c\/li\u003e\n\u003cli\u003e4 character switches provide a multitude of compression flavour combinations that allow the 1978 to take on the characteristics of other compressors.\u003c\/li\u003e\n\u003cli\u003eA Saturation knob allows you to dial in variable amounts of 2nd and 3rd harmonic distortion, and under complete control.\u003c\/li\u003e\n\u003cli\u003eA Saturation knob allows you to dial in variable amounts of 2nd and 3rd harmonic distortion, and under complete control.\u003c\/li\u003e\n\u003cli\u003eComprehensive side chain EQ giving simultaneous control of frequency and level of filtering for the low and high bands. This works in conjunction with the rear panel stereo insert points that provide even further control.\u003c\/li\u003e\n\u003cli\u003eComprehensive side chain EQ giving simultaneous control of frequency and level of filtering for the low and high bands. This works in conjunction with the rear panel stereo insert points that provide even further control.\u003c\/li\u003e\n\u003cli\u003eVariable Wet\/Dry Mix plus Output Gain Knobs give a ‘Parallel Compression’ function without the need for external mixing devices, providing Complete and Effortless Control over the amount of compression used and Output Levels.\u003c\/li\u003e\n\u003cli\u003eVariable Wet\/Dry Mix plus Output Gain Knobs give a ‘Parallel Compression’ function without the need for external mixing devices, providing Complete and Effortless Control over the amount of compression used and Output Levels.\u003c\/li\u003e\n\u003cli\u003eTwo Analogue V.U. Meters with Switchable +10dB Meter Rescale Mode. These have additional dual colour backlighting that act as a visual indication for the amount of saturation.\u003c\/li\u003e\n\u003cli\u003eTwo Analogue V.U. Meters with Switchable +10dB Meter Rescale Mode. These have additional dual colour backlighting that act as a visual indication for the amount of saturation.\u003c\/li\u003e\n\u003cli\u003eTime delay relays on outputs for clean power up\/down.\u003c\/li\u003e\n\u003cli\u003eTime delay relays on outputs for clean power up\/down.\u003c\/li\u003e\n\u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch.\u003c\/li\u003e\n\u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch.\u003c\/li\u003e\n\u003cli\u003eClassic Drawmer Build Quality with Rugged Steel Chassis and Aluminium Front Panel. Designed and manufactured by Drawmer in the UK.\u003c\/li\u003e\n\u003cli\u003eClassic Drawmer Build Quality with Rugged Steel Chassis and Aluminium Front Panel.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured by Drawmer in the UK.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447174340666,"sku":"DRA-1978","price":1899.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1978_Stereo_FET_Compressor_1780726386-01.jpg?v=1780726391"},{"product_id":"drawmer-2u-rack-mount-kit-for-mc-desktop-range","title":"Drawmer 2U Rack-Mount Kit For MC Desktop Range","description":"\u003cp\u003eThe MCB Rack Mounting Kit contains two side panels\/ears, a front facia, and also a lead that brings the AUX input from the back of the MC2.1 to the front panel for easy access. Also included are the necessary screws, an assembly instruction manual and even an allen key.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447174537274,"sku":"DRA-MCB RACK KIT","price":320.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_2U_Rack-Mount_Kit_For_MC_Desktop_Range_1780726397-01.jpg?v=1780726402"},{"product_id":"drawmer-4x4r-rackmount-active-splitter","title":"Drawmer 4x4R Rackmount 4-In 16-Out Active Splitter","description":"\u003cp\u003e\u003cspan class=\"style1\"\u003eThe Drawmer 4x4R is a 4 in\/16 out mic\/line signal splitter\u003c\/span\u003e. It’s an ideal tool to provide multiple outputs for live sound, broadcast coverage, sports events, live recording, press conferences, corporate events and any situation where distribution of high quality audio is required. It incorporates 4 studio grade mic\/line pre-amps, each providing up to 66dB of gain and 16 balanced output stages, each with the option of transformer isolation and comprehensive linking facilities all in a 1U rackmountable housing.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e4 STUDIO GRADE MIC\/LINE PRE-AMPS.\u003c\/li\u003e\n\u003cli\u003eINDEPENDENT INPUT BARGRAPH METERING.\u003c\/li\u003e\n\u003cli\u003e66dB OF VARIABLE GAIN.\u003c\/li\u003e\n\u003cli\u003e48V PHANTOM POWER.\u003c\/li\u003e\n\u003cli\u003eMIC\/LINE SWITCHING.\u003c\/li\u003e\n\u003cli\u003eHEADPHONE MONITORING FACILITY.\u003c\/li\u003e\n\u003cli\u003e4 OUTPUTS PER CHANNEL.\u003c\/li\u003e\n\u003cli\u003eACTIVE SPLITTING ALLOWS FOR LONG CABLE RUNS.\u003c\/li\u003e\n\u003cli\u003eOPTIONAL TRANSFORMER ISOLATION.\u003c\/li\u003e\n\u003cli\u003eLINKING.\u003c\/li\u003e\n\u003cli\u003e1 IN \/ 16 OUT.\u003c\/li\u003e\n\u003cli\u003e2 X1 IN \/ 8 OUT.\u003c\/li\u003e\n\u003cli\u003e1 IN \/ 12 OUT PLUS 1 IN \/ 4 OUT.\u003c\/li\u003e\n\u003cli\u003e4 X4 IN \/ 4 OUT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447174668346,"sku":"DRA-4X4R","price":2299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_4x4R_Rackmount_Active_Splitter_1780726406-01.jpg?v=1780726411"},{"product_id":"drawmer-dl241-xlr-dual-compressor-limiter-balanced-xlr-inputs-outputs","title":"Drawmer DL241-XLR Dual Compressor\/Limiter (Balanced XLR Inputs\/Outputs)","description":"\u003cp\u003eThe Drawmer DL241 is Drawmer’s standard fully featured dual channel (stereo) compressor. This is the compressor that has been the industry standard for many years for its delicate, unobtrusive character. If you are looking for a compressor that will serve you well in all kinds of situations this is the compressor for you. It’s equally great on a drum mix as it is controlling your vocals.\u003c\/p\u003e \u003cp\u003eExpander\/Gate : Drawmer’s unique “Programmed Adaptive Expansion” circuitry allows effective ‘single control operation’ producing a fast smooth response and eliminating ‘chatter’ on or around threshold. This design differs from that of conventional Expanders in that the Expansion Ratio, Hold Attack and Release continually adapt themselves to the dynamics of the incoming signal. The Expander\/Gate provides 80dB range and variable threshold from +20dB to 70dB with an OFF position. Switching is provided for ‘Fast’ or ‘Slow’ release characteristics. The ‘Fast’ mode can be used for instruments with rapid decay times or for additional tightening of the gating effect. The ‘Slow’ mode is more suitable for vocals and instruments with longer decay times or can be used to smooth over rough fade outs. A single LED indicates gating action.\u003c\/p\u003e\u003cp\u003eCompressor : A full Auto Attack\/Release Compressor with variable Threshold and Ratio successfully combines the smoothness of the ‘Soft Knee’ principle with the precision of a ‘Ratio’ control. The advantage of this combination is that instead of the onset of compression being sudden at the threshold point the ratio increases over a 10dB input level range until it reaches the ratio set on the front panel control, thus achieving a more natural sounding compression. Selectable manual or fully automatic Attack and Release times dramatically extend the application range and user scope of the DL241. Selecting the ‘Auto’ mode removes the need for manual adjustment and is particularly valuable when the program being treated does not have predictable or consistent dynamics, often the case when processing a complete mix or a virtuoso bass guitar performance. Under manual control the wide range of adjustment available gives the user the ability to create dynamic effects as well as normal compression.\u003c\/p\u003e\u003cp\u003ePeak Level. ‘Zero Response Time’, ‘Zero Overshoot’ circuitry : This provides an absolute limit to the peak level of the output signal, adjustable from OdB to +16dB above system level. When set to the required level, any excessive peaks will be stopped and the gain momentarily decreased if necessary. The ‘Zero Response Time’ is essential to avoid unpleasant distortion when mastering for CD or sending any signal to digital equipment. ‘Zero Response Time’ means that the DL241 provides complete protection from even the fastest and shortest signal ‘spikes’ (overloads), making the unit also ideally suited for speaker system protection in sound reinforcement applications.\u003c\/p\u003e\u003cp\u003eMetering : Comprehensive bar graph displays give ‘at a glance’ indications of gain reduction, and output signal level Gain reduction from 1dB to -30dB is shown simultaneously with signal level from -20dB to +15dB Other single LEDs indicate function status of Gating Acton, Auto Mode, Bypass, Peak Limiting, Stereo Linking, and Power On.\u003c\/p\u003e\u003cp\u003eStereo Link : When processing stereo signals, linking should be used to prevent image shifting. This facility ties both channels together. Using channel 1 (left) as the master channel removes the need to duplicate control settings for both channels.\u003c\/p\u003e\u003cp\u003eBypass : A fully balanced hard-wire bypass connects the input directly to the output allowing signal to pass through the unit with no power applied. In bypass the VU level meter displays the Input signal.\u003c\/p\u003e\u003cp\u003eOperating Level : The operating level of the DL241 can be instantly switched, independently on each channel, for either +4dBu or -10dBu operation using a rear panel push switch.\u003c\/p\u003e\u003cp\u003eInput\/Output : The DL241 is available with either XLR connections and fully balanced inputs and outputs, or with stereo jack (TRS) connections, fully balanced inputs and single ended outputs.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447174832186,"sku":"DRA-DL241B (XLR)","price":1899.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_Dl241_XLR___Dual_CompressorLimiter__Balanced_XLR_InputsOutputs__1780726415-01.jpg?v=1780727512"},{"product_id":"drawmer-dl251-dual-spectral-compressor","title":"Drawmer DL251 Dual Spectral Compressor w\/ Dynamic Spectral Enhancement","description":"\u003cp\u003eSo what s a Spectral Compressor I hear you ask? Well – The DL251 ‘Spectral Compressor’, incorporates a variable ‘Dynamic Spectral Enhancement’ (D.S.E.) section which eliminates the problems associated with full band compressors by restoring the high frequency energy lost during the full band compression process. This compressor is fully featured with Threshold, ratio, attack and release, output gain, limiter and DSE enhancer.\u003c\/p\u003e \u003cp\u003eCompressor : The compressor section can be switched to provide either HARD or SOFT knee compression. In both the HARD and SOFT modes a Ratio control is available. In the SOFT mode the ratio increases gradually over a 10dB input level range until it reaches the ratio set on the front panel control, thus achieving a more natural sounding compression. Selectable manual or automatic Attack and Release times dramatically extend the application range and user scope of the DL251. Selecting the ‘Auto’ mode removes the need for manual adjustment and is particularly valuable when the programme being treated does not have predictable or consistent dynamics, such as on complete mixes, vocals or ‘slapped and pulled’ bass guitar. Under manual control the wide range of adjustment available gives the user the ability to create dynamic effects as well as normal compression.\u003c\/p\u003e\u003cp\u003eEnhance Level : A variable Enhance control can be used to ‘dynamically’ boost any high frequency energy lost during the full band compression process and has sufficient range to add additional ‘Spectral Energy’ to the programme material for creative processing. When no compression is taking place, the ‘Dynamic Spectral Enhancement’ circuitry is inoperative and so no change is made to the signal. However, as the signal level rises to the point where gain reduction is taking place, the Enhancement system ‘kicks in’ applying dynamic boost which is directly related to the amount of gain reduction taking place. A front panel switch offers an instant A\/B comparison of this feature and a green LED indicates the amount of enhancement taking place.\u003c\/p\u003e\u003cp\u003eMetering : Comprehensive bar graph displays give ‘at a glance’ indications of gain reduction, and input\/output signal level Gain reduction from 1 dB to -30dB is shown simultaneously with signal level from 20dB to + 15dB Other single LEDs indicate function status of Hard\/ Soft compression, Auto Attack\/ Release, Side chain monitoring, Bypass, Enhancement, Peak Limiting, Stereo Linking and Power on.\u003c\/p\u003e\u003cp\u003eSide Chain Listen : A front panel push button with LED status enables the monitoring of any external processing applied to the side chain access connections on the rear panel.\u003c\/p\u003e\u003cp\u003eBypass : A fully balanced hard wire bypass connects the input directly to the output allowing signal to pass through the unit with no power applied. In bypass mode the output level bar graph displays the Input signal.\u003c\/p\u003e\u003cp\u003eStereo Link : When processing stereo signals, linking should be used to prevent image shifting. This facility ties both channels together. Using channel 1 (Left) as the master channel removes the need to duplicate control settings for both channels. A rear panel switch allows the selection of ‘Peak’ or ‘Average’ stereo signal detection.\u003c\/p\u003e\u003cp\u003ePeak Level : ‘Zero Response Time’, ‘Zero Overshoot’ circuitry provides an absolute limit to the peak level of the output signal, adjustable from 0dB to +16dB above system level When set to the required level, any excessive peaks will be stopped and the gain momentarily decreased if necessary The ‘Zero Response Time’ is essential to avoid unpleasant distortion when mastering for CD or sending any signal to digital equipment. ‘Zero Response Time’ means that the DL251 provides complete protection from even the fastest and shortest signal ‘spikes’ (overloads), making the unit also ideally suited for speaker system protection in sound reinforcement applications.\u003c\/p\u003e\u003cp\u003eOperating Level : The operating level of the DL251 can be instantly switched, independently on each channel, for either +4dBu or -10dBu operation using a rear panel push switch.\u003c\/p\u003e\u003cp\u003eInput\/Output : The DL251 is provided with balanced inputs and outputs on XLR connections.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447175061562,"sku":"DRA-DL251","price":1755.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DL251_Dual_Spectral_Compressor_1780726429-01.jpg?v=1780726434"},{"product_id":"drawmer-dl441-quad-compressor-limiter","title":"Drawmer DL441 Quad Compressor \/ Limiter","description":"\u003cp\u003eThe Drawmer DL 441 features 4 classic Drawmer professional compressor in a single unit rack space. Each compressor provides control for Threshold, ratio, gain makeup and Limit making this unit extremely good value. Choose this copressor if you are need a bunch of quality compressors at mixdown.\u003c\/p\u003e \u003cp\u003eCompressor : The compressor section can be switched to provide either HARD or SOFT knee compression In both the HARD and SOFT modes a Ratio control is available. In the SOFT mode the ratio increases gradually over a 10dB input level range until it reaches the ratio set on the front panel control, thus achieving a more natural sounding compression In HARD mode the compressor provides a more precise means of controlling gain, where the ratio as set on the front panel is applied immediately the signal exceeds threshold. This is particularly useful in many broadcast applications. HARD knee compression can also be used creatively as an effect, particularly in the treatment of drum and guitar sounds, or for giving rock vocals a ‘compressed sound’.\u003c\/p\u003e\u003cp\u003eAuto Attack and Release : removes the need for manual adjustment by producing a response which constantly follows the dynamics of the signal. This enables the DL441 to preserve crisp transients without allowing excessive peaks to occur. A smooth yet lively recovery from compression minimizes side effects such as ‘pumping’ and ‘breathing’. This feature is particularly valuable when the program being treated does not have predictable or consistent dynamics, such as complete mixes, vocals or ‘slapped and pulled’ bass guitar.\u003c\/p\u003e\u003cp\u003ePeak Level Limiter : ‘Zero Response Time’, ‘Zero Overshoot’ circuitry provides an absolute limit to the peak level of the output signal, adjustable from 0db to +16dB above system level. ‘Zero Response Time’ transparent limiting means that the DL441 provides complete protection from even the fastest and shortest signal overloads, making the unit ideally suited for speaker system protection in sound reinforcement applications. The sophisticated circuitry will also prevent unpleasant distortion when used for digital mastering.\u003c\/p\u003e\u003cp\u003eMetering : Comprehensive bar graph displays give ‘at a glance’ indications of gain reduction, and input\/output signal level Gain reduction from 1dB to 30dB is shown simultaneously with signal level from 10dB to +10dB. When the channel is in BYPASS the output bar graph displays the input signal level. Other single LEDs indicate function status of Hard\/Soft compression, Bypass, Peak Limiting, Linking, and Power on.\u003c\/p\u003e\u003cp\u003eBypass : A fully balanced hard-wire bypass connects the input directly to the output allowing signal to pass through the unit with no power applied.\u003c\/p\u003e\u003cp\u003eStereo Linking : Channels 1-2 and\/or 3-4 can be stereo linked, where the left channel of the stereo pair becomes the master.\u003c\/p\u003e\u003cp\u003eOperating Level : The operating level of the DL441 can be instantly switched, independently on each channel, for either +4dBu or -10dBu operation using a rear panel push switch.\u003c\/p\u003e\u003cp\u003eInput\/Output : The DL441 is provided with balanced inputs and outputs on XLR connections.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447175225402,"sku":"DRA-DL441","price":2199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DL441_Quad_CompressorLimiter_1780726440-01.jpg?v=1780726445"},{"product_id":"drawmer-dms3-dual-output-a-d-converter","title":"Drawmer DMS3 Dual Output A\/D Converter","description":"\u003cp\u003eTwo balanced XLR analog inputs are located on the back of the A2D2, both using Burr-Brown analog input circuitry. Two input level modes are available: Calibrated and Variable. In Calibrated mode, two recessed, 24-turn pots allow precision adjustments for input levels in fixed installations where immediate adjustment is not necessary. In Variable mode, two additional potentiometers with external knobs are provided for left\/right variable-input control — these being much more accessible when the operating engineer needs quick access to the input levels. Both input modes accept incoming signals from -2 dBU to +28 dBU. Factory calibration places 0 dBFs at -18 dBU.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447175422010,"sku":"DRA-DMS-3","price":2099.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DMS3_Dual_Output_AD_Converter_1780726452-01.jpg?v=1780727589"},{"product_id":"drawmer-dms4-master-clock","title":"Drawmer DMS4 M-Clock Lite Master Clock Generator","description":"\u003cp\u003e\u003cspan class=\"style1\"\u003eA high-stability master clock generator!\u003c\/span\u003e Designed as a sister to the acclaimed Drawmer M-Clock Plus, the name of the M-Clock Lite should not fool you – this is a professional, high-stability master clock generator, which is forward compatible with high speed clocks predicted for the future. The M-Clock Lite is simply streamlined, providing a simple, quality clock generator – without surplus features many studios will never need. M-Clock Lite features an AES Grade 1 master clock generator, meaning that the generated clock has a long term frequency accuracy of +\/- 1ppm.\u003c\/p\u003e\n\u003cp\u003eHigh-stability and efficient Many clocks are complicated devices with many added features, which although useful, may be surplus to requirements. The M-Clock Lite is designed to effectively meet the requirements of most studios. The high-stability master clock offers clock rates of 44.1, 48, 88.2, 96, 176.4, 192, 352.8, and 384kHz at extremely low jitter.\u003c\/p\u003e\n\u003cp\u003eTen outputs with two convenient front-panel outs\u003c\/p\u003e\n\u003cp\u003eThe M-Clock Lite provides ten outputs. Eight are located at the rear of the device while two are on the front panel for conveniently connecting any portable equipment.\u003c\/p\u003e\n\u003cp\u003eHandy external clock input\u003c\/p\u003e\n\u003cp\u003eThe M-Clock Lite incorporates an external clock input so you can easily select an alternative clock source – without having to waste time re-routing all of your clock cables.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447175651386,"sku":"DRA-DMS-4","price":1499.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DMS4_Master_Clock_1780726465-01.jpg?v=1780727611"},{"product_id":"drawmer-dms6-dual-redundant-wordclock-distribution-amplifier","title":"Drawmer DMS6 D-Clock-R Dual Redundant Wordclock Distribution Amplifier","description":"\u003cp\u003e\u003cspan class=\"style1\"\u003eDual Redundant Power Supply via 2 x universal voltage filtered mains power inlets for continuous operation \u0026amp; reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe D-Clock-R is fitted with two identical and independent power supply units, providing Dual Redundancy. In situations where it is critical that power must be maintained the load is shared between the two supplies, however, should power to one fail the D-Clock-R will still run perfectly well on either.\u003c\/p\u003e\n\u003cp\u003eLCD Display with 3 sample rate measurement modes and accurate to 2ppm.\u003c\/p\u003e\n\u003cp\u003eA 16 character blue LCD display provides a reference measurement of the incoming sample rate to an accuracy of 2ppm and displays the information in three different formats: actual frequency (to one decimal place), nominal frequency +\/-ppm error, or nominal frequency plus percentage of pull up or pull down.\u003c\/p\u003e\n\u003cp\u003eAuto-Sensing Dual Redundant WordClock\/AES3id BNC Inputs provide continuous operation and added dependability.\u003c\/p\u003e\n\u003cp\u003eTwo inputs are provided, a default and auxiliary, capable of locking on to both word clock and AES-3id, with the source automatically selected depending on the type and quality of the signal. Twelve BNC clock outputs are situated on the rear panel with a further four on the front panel for quick patching to other digital devices.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447175880762,"sku":"DRA-DMS-6 D-Clock-R","price":2099.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DMS6_Dual_Redundant_Wordclock_Distribution_Amplifier_1780726478-01.jpg?v=1780727677"},{"product_id":"drawmer-dra-da6-balanced-distribution-amplifier","title":"Drawmer DRA-DA6 Balanced Distribution Amplifier","description":"\u003cp\u003eThe Drawmer DA 6 handles distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e1×6 Stereo Distribution Amp with Monitoring.\u003c\/li\u003e\n\u003cli\u003e1 set of stereo (2) XLR inputs.\u003c\/li\u003e\n\u003cli\u003e6 sets of stereo (2) XLR outputs.\u003c\/li\u003e\n\u003cli\u003eInput stage has LED level meter.\u003c\/li\u003e\n\u003cli\u003eEach output channel can be switched to mono.\u003c\/li\u003e\n\u003cli\u003eEach output channel can be individually monitored.\u003c\/li\u003e\n\u003cli\u003eBuilt-in headphone amp.\u003c\/li\u003e\n\u003cli\u003eOptional transformer balanced outputs.\u003c\/li\u003e\n\u003cli\u003eElectronically balanced inputs with individual left\/right level controls.\u003c\/li\u003e\n\u003cli\u003eLED metering on input for balancing stereo material or two mono signals.\u003c\/li\u003e\n\u003cli\u003eLeft \/ Right level controls on each output with a stereo \/ mono switch.\u003c\/li\u003e\n\u003cli\u003eHeadphone jack to monitor output of selected channel.\u003c\/li\u003e\n\u003cli\u003eLED metering on output of selected channel.\u003c\/li\u003e\n\u003cli\u003eAuxiliary pair of balanced 1\/4″ output jacks for linking multiple DA6 units.\u003c\/li\u003e\n\u003cli\u003e1 unit rack space.\u003c\/li\u003e\n\u003cli\u003eInputs and Outputs are balanced XLRs at +4dBu.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447176110138,"sku":"DRA-DA-6","price":1335.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DRA-DA6___Balanced_Distribution_Amplifier_1780726492-01.jpg?v=1780727703"},{"product_id":"drawmer-ds101-500-series-noise-gate","title":"Drawmer DS101 500 Series Noise Gate","description":"\u003cp\u003eGet that clasic Drawmer DS series gate in a 500 Series format – this gate is everything you want from a gate and the best gates are always made by Drawmer. The DS 101 fits nicely into your 500 series lunchbox for ease of use and space saving.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eFully featured noise gate based on the industry standard DS201.\u003c\/li\u003e\n\u003cli\u003eTakes up a single 500 series slot.\u003c\/li\u003e\n\u003cli\u003eProprietary Hysteris or “trigger stabilization” to prevent “chatter” around the threshold.\u003c\/li\u003e\n\u003cli\u003eFully variable high pass and low pass filters for “frequency conscious” gating.\u003c\/li\u003e\n\u003cli\u003eComprehensive envelope control, attack, hold, decay, and range.\u003c\/li\u003e\n\u003cli\u003eExternal triggering via key input or the new IR trigger pulse from another DS101.\u003c\/li\u003e\n\u003cli\u003e“Key Listen” facility.\u003c\/li\u003e\n\u003cli\u003eExtremely fast attack time, to preserve the natural attack of the sound.\u003c\/li\u003e\n\u003cli\u003eLinkable – up to ten units in one rack space – with individual envelope shaping.\u003c\/li\u003e\n\u003cli\u003eDrawmer “traffic lighting” metering.\u003c\/li\u003e\n\u003cli\u003eCan be used for “Gating” or “Ducking”.\u003c\/li\u003e\n\u003cli\u003eLow noise design.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447176306746,"sku":"DRA-DS101","price":749.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DS101_500_Series_Noise_Gate_1780726505-01.jpg?v=1780727738"},{"product_id":"drawmer-ds201-dual-noise-gate","title":"Drawmer DS201 Dual Channel Noise Gate","description":"\u003cp\u003eThe Drawmer DS201 dual gate is the industry standard for good reason – This gate is the gate that all others are measured. This gate was used to create that famous Johnny Marr The Smiths guitar sound in \u003cem\u003eHow Soon Is Now\u003c\/em\u003e.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eVariable high pass and low pass filters for “frequency conscious” gating.\u003c\/li\u003e\n\u003cli\u003eComprehensive envelope control, attack, hold, decay, and range.\u003c\/li\u003e\n\u003cli\u003eKey input for external triggering.\u003c\/li\u003e\n\u003cli\u003e“Key Listen” facility.\u003c\/li\u003e\n\u003cli\u003eExtremely fast attack time, to preserve the natural attack of the sound.\u003c\/li\u003e\n\u003cli\u003eBalanced inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eStereo linkable.\u003c\/li\u003e\n\u003cli\u003eCan be used for “Gating” or “Ducking”.\u003c\/li\u003e\n\u003cli\u003eHigh audio specification.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447205404730,"sku":"DRA-DS201","price":1599.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DS201_Dual_Noise_Gate_1780728455-01.jpg?v=1780728597"},{"product_id":"drawmer-ds404-quad-noise-gate","title":"Drawmer DS404 Quad Noise Gate","description":"\u003cp\u003eThe DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the ‘industry standard’ gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer have designed the DS404 Quad Noise Gate utilizing new and unique ‘Programme Adaptive’ circuitry. This makes the DS404 ideally suited for use over a wide range of input signals, ranging from drums and other percussive instruments through to vocals, pianos and even complete mixes.\u003c\/p\u003e \u003cp\u003eQuad gate : Four channels of DS201 quality noise gates.\u003c\/p\u003e\u003cp\u003eFrequency Sensitive : The provision of variable Low-Pass and High-Pass Filters allows ‘without compromise’ frequency selective gating. The unit can be switched for either Internal or External Key source and the KEY LISTEN facility enables monitoring of the filter setting.\u003c\/p\u003e\u003cp\u003eHard\/Soft Gating : Each channel of the DS404 can be operated as a HARD or SOFT gate, providing quite different characteristics. Two coloured LEDs clearly indicate mode status. In the HARD mode the DS404 offers ultra-fast response time, stable triggering with complete freedom from chatter around threshold and a specialized release contour which is ideally suited to drums and other percussive material. In the SOFT mode the DS404 becomes a versatile Expander capable of handling vocals and sub mixes. Drawmer’s unique ‘Programme Adaptive’ circuitry is used to optimise the attack time and ratio as well has having some effect on the manual release setting . A more gentle release characteristic is utilized to complement the SOFT gate.\u003c\/p\u003e\u003cp\u003eThreshold : A fully variable threshold control provides a range from +20dB to -70dB.\u003c\/p\u003e\u003cp\u003eRelease Control : A fully variable release control is provided with times from 10 ms to 5 sec to ensure that essential envelope control is not sacrificed in exchange for an economy in rack space.\u003c\/p\u003e\u003cp\u003eAttenuation Range : The DS404 has switchable attenuation between 90dB and 20dB to allow for applications where a complete mute is not desired.\u003c\/p\u003e\u003cp\u003eChain Linking : Operating the LINK control switches the channel on the right to SLAVE operation, where its gating mode, threshold and envelope characteristics are controlled by the MASTER (left) channel. Any adjacent three channels or two stereo pairs can be linked in this way for use in any conceivable situation where linking may be required.\u003c\/p\u003e\u003cp\u003eLED Displays : Drawmer’s familiar tri-colour LED display is once again utilized as the optimum method for indicating the envelope status for each channel.\u003c\/p\u003e\u003cp\u003eInput\/Output : The DS404 is provided with balanced inputs and outputs on XLR connections.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447205634106,"sku":"DRA-DS404","price":1899.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DS404_Quad_Noise_Gate_1780728468-01.jpg?v=1780728473"},{"product_id":"drawmer-ds501-dual-noise-power-gate","title":"Drawmer DS501 Dual Channel Noise Power Gate","description":"\u003cp\u003e\u003cspan class=\"style1\"\u003eThe DS501 is a sophisticated dual channel noise gate with fully tuneable ‘Peak Punch’\u003c\/span\u003e incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates. If you are after a gate than look no further – the DS501 far exceeds every other gate on the market. Fast punchy attack and smooth release. This gate features key inputs for special FX and total control over when the key will kick in.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e‘Tuneable’ Peak Punch.\u003c\/li\u003e\n\u003cli\u003eVariable high pass and low pass filters for “frequency conscious” gating.\u003c\/li\u003e\n\u003cli\u003eComprehensive envelope control, attack, hold, decay, and range.\u003c\/li\u003e\n\u003cli\u003eKey input for external triggering.\u003c\/li\u003e\n\u003cli\u003e“Key Listen” facility.\u003c\/li\u003e\n\u003cli\u003eExtremely fast attack time, to preserve the natural attack of the sound.\u003c\/li\u003e\n\u003cli\u003eBalanced inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eStereo linkable.\u003c\/li\u003e\n\u003cli\u003eCan be used for “Gating” or “Ducking”.\u003c\/li\u003e\n\u003cli\u003eHigh audio specification.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447205863482,"sku":"DRA-DS501","price":1399.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_DS501_Dual_Noise_Power_Gate_1780728480-01.jpg?v=1780728702"},{"product_id":"drawmer-kickbox-4x4-portable-active-splitter","title":"Drawmer Kickbox 4×4 Portable Active Splitter","description":"\u003cp\u003eThe Drawmer Kickbox is a versatile portable active 4 channel preamp with active splitter feature that comes in a robust mobile pelican style carry case. This unit is ideal for broadcast, sports events, live recording, press conferences, corporate events and any situation where distribution of high quality audio is required.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e4 STUDIO GRADE MIC\/LINE PRE-AMPS.\u003c\/li\u003e\n\u003cli\u003eINDEPENDENT INPUT BARGRAPH METERING.\u003c\/li\u003e\n\u003cli\u003e66dB OF VARIABLE GAIN.\u003c\/li\u003e\n\u003cli\u003e48V PHANTOM POWER.\u003c\/li\u003e\n\u003cli\u003eMIC\/LINE SWITCHING.\u003c\/li\u003e\n\u003cli\u003eHEADPHONE MONITORING FACILITY.\u003c\/li\u003e\n\u003cli\u003e4 OUTPUTS PER CHANNEL.\u003c\/li\u003e\n\u003cli\u003eACTIVE SPLITTING ALLOWS FOR LONG CABLE RUNS.\u003c\/li\u003e\n\u003cli\u003eOPTIONAL TRANSFORMER ISOLATION.\u003c\/li\u003e\n\u003cli\u003eTRANSFORMER LOADED LED STATUS.\u003c\/li\u003e\n\u003cli\u003eLINKING.\u003c\/li\u003e\n\u003cli\u003e1x 1 IN\/16 OUT.\u003c\/li\u003e\n\u003cli\u003e2x 1 IN\/ 8 OUT.\u003c\/li\u003e\n\u003cli\u003e1x 1 IN\/12 OUT plus 1 IN\/4 OUT.\u003c\/li\u003e\n\u003cli\u003e4x 1 IN\/4 OUT.\u003c\/li\u003e\n\u003cli\u003ePORTABILITY.\u003c\/li\u003e\n\u003cli\u003eINTERSTACKABLE.\u003c\/li\u003e\n\u003cli\u003eREMOVABLE LID TO PROVIDE EASY ACCESS AND CABLE ROUTING.\u003c\/li\u003e\n\u003cli\u003eCOMPACT SELF CONTAINED ROAD PROOF CASE ELIMINATES THE NEED FOR BULKY FLIGHT CASES.\u003c\/li\u003e\n\u003cli\u003eWHEN LOCKED IT’S DUST \/ WATER \/ CORROSION PROOF.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447206092858,"sku":"DRA-KICKBOX 4X4","price":2299.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_Kickbox_4x4_Portable_Active_Splitter_1780728493-01.jpg?v=1780733529"},{"product_id":"drawmer-la12-line-distribution-amplifier","title":"Drawmer LA12 Line Distribution Amplifier","description":"\u003cp\u003eThe Drawmer \u003cspan class=\"style1\"\u003eLA12\u003c\/span\u003e provides one stereo input with master ‘gain’ and ‘balance’ controls and twelve stereo outputs, each with individual output level control. It may be used to distribute one stereo signal to up to twelve different outputs. A typical application example would be for the distribution of one stereo signal to other rooms\/areas within a complex e.g. nightclub, shopping mall etc., but it may be used for a variety of other applications, such as real time cassette duplication.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eOne stereo input with master gain and balance controls.\u003c\/li\u003e\n\u003cli\u003eOne stereo input with master gain and balance controls.\u003c\/li\u003e\n\u003cli\u003eTwelve stereo outputs each with individual output level controls.\u003c\/li\u003e\n\u003cli\u003eTwelve stereo outputs each with individual output level controls.\u003c\/li\u003e\n\u003cli\u003eIf more than twelve stereo outputs are required an auxiliary stereo output, which follows the input gain and balance controls, can be linked to the input of a second LA12.\u003c\/li\u003e\n\u003cli\u003eIf more than twelve stereo outputs are required an auxiliary stereo output, which follows the input gain and balance controls, can be linked to the input of a second LA12.\u003c\/li\u003e\n\u003cli\u003eThe unit will operate at system levels in the range – 20dB to + 10dB.\u003c\/li\u003e\n\u003cli\u003eThe unit will operate at system levels in the range – 20dB to + 10dB.\u003c\/li\u003e\n\u003cli\u003eA maximum gain of + 20dB is available through the unit which allows a wide range of ‘source’ and ‘destination’ equipment to be interfaced.\u003c\/li\u003e\n\u003cli\u003eA maximum gain of + 20dB is available through the unit which allows a wide range of ‘source’ and ‘destination’ equipment to be interfaced.\u003c\/li\u003e\n\u003cli\u003eAll audio connections are on professional quality phono (RCA) connectors for ease of installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447206289466,"sku":"DRA-LA-12","price":999.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_LA12_Line_Distribution_Amplifier_1780728505-01.jpg?v=1780728734"},{"product_id":"drawmer-mc-1-1-monitor-headphone-controller","title":"Drawmer MC 1.1 Monitor\/Headphone Controller","description":"\u003cp\u003eThe Drawmer MC1.1 is known for its functionality and transparency, offering fantastic sound quality and with the addition of a new RIAA phono stage the MC1.1 is a great solution for your precious turntable setup.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra low noise and transparent circuit design.\u003c\/li\u003e\n\u003cli\u003eLinear power supply with low hum toroidal transformer and internal voltage selector switch.\u003c\/li\u003e\n\u003cli\u003e3 Input Sources – Balanced XLR, MP3 Player 3.5mm Jack \u0026amp; Switchable Line\/Phono (RIAA MM) RCA.\u003c\/li\u003e\n\u003cli\u003eTwo switchable output stages, Balanced XLR and RCA.\u003c\/li\u003e\n\u003cli\u003eMono Sub woofer output available simultaneous to balanced outs.\u003c\/li\u003e\n\u003cli\u003eParallelled custom quad pots on main and headphone level controls for excellent channel matching and smooth feel.\u003c\/li\u003e\n\u003cli\u003eIndependent volume controls for the main outputs and headphone section.\u003c\/li\u003e\n\u003cli\u003eRugged steel chasis and stylish brushed aluminium cover.\u003c\/li\u003e\n\u003cli\u003eCan be stacked and is rack mountable (with the MCB 2U mounting kit).\u003c\/li\u003e\n\u003cli\u003eDimensions: L 272mm x W 215mm x H 81mm. Weight: 2.5kg.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured by Drawmer in the UK.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447206518842,"sku":"DRA-MC1.1","price":1049.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MC_1.1_MonitorHeadphone_Controller_1780728518-01.jpg?v=1780728522"},{"product_id":"drawmer-mc-2-1-monitor-headphone-controller","title":"Drawmer MC 2.1 Monitor\/Headphone Controller","description":"\u003cp\u003eThe Drawmer MC2.1 is a super quiet rack mount Studio Monitor\/speaker selector with dual headphone sends and talkback facilities. The Mc2.1 is equally at home either on your desk or in a 19″ rack with the use of the Drawmer rack mount kit (sold separately).\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra low noise and transparent circuit design.\u003c\/li\u003e\n\u003cli\u003eLinear power supply with low hum toroidal transformer and internal voltage selector switch.\u003c\/li\u003e\n\u003cli\u003e3 stereo balanced speaker outputs, plus a dedicated mono speaker\/sub-woofer output. All have individual left \u0026amp; right trims under the unit to provide complete control over level matching.\u003c\/li\u003e\n\u003cli\u003eTimed relay protection on all speaker outputs to prevent power up\/down bangs.\u003c\/li\u003e\n\u003cli\u003eComprehensive mix checking facilities including Left\/Right Cut, Phase Reverse, Mono, Dim, Mute.\u003c\/li\u003e\n\u003cli\u003eParallelled custom quad pots on main and headphone level controls for excellent channel matching and smooth feel.\u003c\/li\u003e\n\u003cli\u003eFour inputs including balanced Neutrik XLR, balanced Neutrik XLR\/JACK COMBI, and shared aux phono or 3.5mm jack.\u003c\/li\u003e\n\u003cli\u003eTwo headphone amplifiers with individual level controls.\u003c\/li\u003e\n\u003cli\u003eBuilt in talk back microphone with level control, mono output jack and internal headphone routing.\u003c\/li\u003e\n\u003cli\u003eRugged steel chasis and stylish brushed aluminium cover.\u003c\/li\u003e\n\u003cli\u003eCan be stacked and is rack mountable (with the MCB 2U mounting kit).\u003c\/li\u003e\n\u003cli\u003eDimensions: L 272mm x W 215mm x H 81mm. Weight: 2.5kg.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447206846522,"sku":"DRA-MC2.1","price":1229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MC_2.1_MonitorHeadphone_Controller_1780728528-01.jpg?v=1780731786"},{"product_id":"drawmer-mc-3-1-desktop-monitor-controller","title":"Drawmer MC 3.1 Desktop Monitor Controller","description":"\u003cp\u003eThe Drawmer MC3.1 is a fully featured passive desktop monitor controller with in built talkback and headphone amp. This controller is whisper quiet and has no unwanted effect on your audio that is typically associated with cheaper monitor controllers. You can switch between 3 sets of monitors and a dedicated Sub out. Unlike most monitor controllers this one has a trim controls for each monitor out to balance the volume between each set of speakers.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra low noise and transparent circuit design.\u003c\/li\u003e\n\u003cli\u003eSource switches for both Main \u0026amp; Cue can be active in any combination. 5 Inputs in Total – 1x Digital AES\/SPDIF Neutrik XLR\/JACK COMBI \u0026amp; 2 balanced analogue Neutrik XLR\/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel \u0026amp; 1 3.5mm Front Panel Aux.\u003c\/li\u003e\n\u003cli\u003e3x Speakers Plus a Mono Sub can be switched individually \u0026amp; simultaneously or give A\/B comparisons. Each has level trims to provide precise channel matching.\u003c\/li\u003e\n\u003cli\u003eTimed relay protection on all speaker outputs to prevent power up\/down bangs.\u003c\/li\u003e\n\u003cli\u003eVolume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel.\u003c\/li\u003e\n\u003cli\u003e2x Headphone Amplifiers with Individual Level Controls \u0026amp; Switching between Main \u0026amp; Cue Inputs so the Artist can listen to a Different Mix to the Engineer.\u003c\/li\u003e\n\u003cli\u003eFront Panel 3.5mm AUX Input \u0026amp; Level Control for connecting MP3 player, smartphone or tablet etc.\u003c\/li\u003e\n\u003cli\u003eCue Level Control adjusts the volume for the Artist’s Monitors.\u003c\/li\u003e\n\u003cli\u003eBuilt In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack \u0026amp; Internal Routing to Headphone and Cue Outputs.\u003c\/li\u003e\n\u003cli\u003eComprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L\/R Mute; Phase Reverse and more, help check every aspect of your Mix \u0026amp; Provide Ultimate Control.\u003c\/li\u003e\n\u003cli\u003eDesktop ‘wedge’ form factor.\u003c\/li\u003e\n\u003cli\u003eKensington security slot (also called a K-Slot or Kensington lock).\u003c\/li\u003e\n\u003cli\u003eRugged steel chasis and stylish brushed aluminium cover.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447207174202,"sku":"DRA-MC3.1","price":1899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MC_3.1_Desktop_Monitor_Controller_1780728544-01.jpg?v=1780731802"},{"product_id":"drawmer-mc7-1-surround-monitor-controller","title":"Drawmer MC 7.1 Surround Monitor Controller","description":"\u003cp\u003eThe Drawmer MC7.1 Surround Monitor Controller is the pinnacle of the analogue studio monitoring. It works as a 7.1\/5.1 and stereo monitor controller with lots of inputs and output configurations. Designed to provide all the mix checking features required for surround recordings without compromising on those used in stereo monitoring. It has the same pristine \u0026amp; transparent design as others from the Drawmer monitor controller pedigree, with a rugged desktop “wedge” form factor as used in the popular MC3.1. The Drawmer MC7.1 Monitor controller adds all the functionally you need from a multi-speaker controller but without sacrificing audio quality.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003ePristine, ultra-low noise \u0026amp; transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.\u003c\/li\u003e\n\u003cli\u003eThere are a total of 20 input sources. These include two separate 7.1 inputs (one via balanced jacks and one via 25 pin D-sub) with a through output to send to a multitrack recorder, for example. A Stereo input via Neutrik combijacks, and a Top panel 3.5mm AUX Input \u0026amp; Level Control for connecting MP3 players, smartphones or tablets etc.\u003c\/li\u003e\n\u003cli\u003e3x Sets of Speaker Outputs. One 7.1 (or 8 Speakers in any configuration), one Stereo Left\/Right pair, and one Mono\/Sub. Each can be switched individually \u0026amp; simultaneously or give A\/B comparisons. All eleven outputs have level trims to provide precise channel matching and ease of calibration.\u003c\/li\u003e\n\u003cli\u003eEach of the eight 7.1 speakers can be cut or soloed individually.\u003c\/li\u003e\n\u003cli\u003e7.1 channels can be mixed down to 5.1, Stereo and Mono, though any configuration of up to 8 monitors should be possible depending on the source and the speaker layout.\u003c\/li\u003e\n\u003cli\u003eStereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.\u003c\/li\u003e\n\u003cli\u003eWhen in stereo operation comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L\/R Mute; Phase Reverse and more, help check every aspect of your Mix \u0026amp; Provide Ultimate Control.\u003c\/li\u003e\n\u003cli\u003eVolume can be set via the Variable Front Panel Knob or a Preset Control. Each has excellent channel matching and smooth feel.\u003c\/li\u003e\n\u003cli\u003e2x Headphone Amplifiers with Individual Level Control.\u003c\/li\u003e\n\u003cli\u003eBuilt In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, \u0026amp; Internal Routing to Headphones and also a Mono Output Jack.\u003c\/li\u003e\n\u003cli\u003eThe MC7.1 is all analogue so won’t need to be rebooted due to software crashes, and doesn’t require firmware updates.\u003c\/li\u003e\n\u003cli\u003eDesktop ‘wedge’ form factor with a rugged steel chassis and a Kensington security slot for added protection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447207534650,"sku":"DRA-MC7.1","price":2599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MC7.1_Surround_Monitor_Controller_1780728559-01.jpg?v=1780728565"},{"product_id":"drawmer-mpa-90-stereo-power-amp","title":"Drawmer MPA 90 Stereo Power Amp","description":"\u003cp\u003eThe Drawmer MPA 90 is a powerful stand alone Amp used to power mid to larger passive studio monitors. This amp has plenty of clean power at hand. You can even mono block 2 for extra grunt.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e90+90Wrms into 4 Ohms.\u003c\/li\u003e\n\u003cli\u003e50+50Wrms into 8 Ohms.\u003c\/li\u003e\n\u003cli\u003e1x180W into 8 Ohms bridged mode.\u003c\/li\u003e\n\u003cli\u003eStereo\/Mono switch to use as a Stereo amplifier or as a Monoblock in Bridged or Bi-Amp Modes.\u003c\/li\u003e\n\u003cli\u003eSwitchable balanced Neutrik XLR and unbalanced Phono inputs.\u003c\/li\u003e\n\u003cli\u003eEfficient, low heat design with Low Power Consumption. Consumes only 10W of power when idling and a maximum power consumption of 55W when driven, and only 0.2W when in standby mode.\u003c\/li\u003e\n\u003cli\u003eThermal, overload and power up\/power down protection.\u003c\/li\u003e\n\u003cli\u003eStandby, fault and clip indicators\u003c\/li\u003e\n\u003cli\u003eRugged steel chasis and stylish brushed aluminium cover.\u003c\/li\u003e\n\u003cli\u003eCan be stacked and is rack mountable (with the MCB 2U mounting kit).\u003c\/li\u003e\n\u003cli\u003eDimensions: L 272mm x W 215mm x H 81mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447207829562,"sku":"DRA-MPA-90","price":1135.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MPA_90_Stereo_Power_Amp_1780728576-01.jpg?v=1780728580"},{"product_id":"drawmer-mx30-dual-gated-compressor-limiter","title":"Drawmer MX30 Dual Channel Gated Compressor Limiter","description":"\u003cp\u003eThe Drawmer MX30 is a fully featured compressor limiter with programable gate.You would choose this compressor for its simplicity of control. There are 3 module – Gate, compressor, limiter. Each section has no more than 2 control knobs making this unit so easy to set up. Being stereo is is great on a drum mix buss. While this unit may be simply in its control the sound is it still features Drawmers classic characteristic.\u003c\/p\u003e \u003cp\u003eProgramme Adaptive’ Gate Used to remove unwanted noise below a pre-set level, each channel consists of a variable Threshold Gate incorporating Drawmer’s ‘Programme Adaptive’ circuitry. Although quick and simple to operate, the gate’s auto-circuitry continually optimises such parameters as Attack, Hold, Ratio and Release, completely eliminating ‘chatter’ when the signal is fluctuating on or around Threshold. Two LEDs show when the signal is ‘above’ or ‘below’ Threshold and a push button switch allows additional control of Release time. This design approach also retains all ‘leading edge’ information making the gate ideal for ‘cleaning up’ vocals or retaining the ‘punch’ on gated drums. Switching is provided for ‘Fast’ or ‘Slow’ release characteristics. The ‘Fast’ mode can be used for instruments with rapid decay times or for additional tightening of the gating effect. The ‘Slow’ mode is more suitable for vocals and instruments with longer decay times or can be used to smooth over rough fade outs. A single LED indicates gating action.\u003c\/p\u003e\u003cp\u003eSoft Knee ‘Auto Compressor’\u003c\/p\u003e\u003cp\u003eThe gate is followed by a variable Threshold, variable Ratio, soft knee compressor with fully automatic Attack and Release. Large transients are controlled instantly whilst small signal variations are treated gently, retaining as much ‘life’ as possible and without generating unpredictable side effects. the MX30 Pro handles all compression levels with ease and displays the amount of compression on a high resolution Gain Reduction bargraph meter.\u003c\/p\u003e\u003cp\u003eOutput The Gain control is used to compensate for the amount of compression and brings the signal to the required output level as displayed by the output bargraph meter. A variable Threshold ‘zero overshoot’ limiter, essential for avoiding distortion when mastering to digital or speaker protection in a ‘live’ situation, adds the final polish to the signal by keeping control over signal peaks. The Limit threshold provides an absolute maximum peak level which no signal can pass. Fast transients are clipped instantly whilst more sustained peaks are dealt with by applying Gain Reduction, indicated by a single LED.\u003c\/p\u003e\u003cp\u003eGate Threshold:\u003c\/p\u003e\u003cp\u003eThis control sets the level below which gating takes place and may be set anywhere in the range of -70dB to +20dB. A green LED illuminates to show when the signal is above threshold (i.e. gate open) and a red LED illuminates when the signal is below Threshold (i.e. gate closed).\u003c\/p\u003e\u003cp\u003eRelease: Either a Fast or Slow auto release contour may be selected depending on the material being processed. An LED indicates when Slow release status is engaged. Percussive material with little or no reverb is generally treated using the Fast release setting, whereas with slow decays or a significant amount of added reverb will usually respond better to the Slow release setting.\u003c\/p\u003e\u003cp\u003eCompressor Threshold: This determines the input level above which gain reduction will be applied and may be set anywhere in the range of -40dB to +20dB. Soft Knee compression takes place for signals exceeding the threshold level by up to 10dB above which level, conventional ‘ratio’ compression is applied.\u003c\/p\u003e\u003cp\u003eGain Reduction Bargraph Meter: A nine segment LED bargraph meter continuously monitors the gain reduction applied by the compressor over a range of 0dB to 30dB.\u003c\/p\u003e\u003cp\u003eRatio: Sets the final compression ratio that will be applied once the 10dB soft knee region is exceeded. The ratio may be continuously adjusted from 1.2:1 to infinity:1 allowing the possibility of true hard limiting. The higher the ratio setting the more compression takes place (eg. A ratio of 8:1 means that an 8dB increase in volume at the input will appear as a 1dB increase in volume at the output).\u003c\/p\u003e\u003cp\u003eStereo Link: The unit can function as two independent gated\/compressor\/limiters or when ‘link’ mode is engaged for stereo use Channel 1 becomes the master, automatically duplicating its parameters across to Channel 2. In this mode the same degree of gain reduction is applied to both audio channels to prevent image shifting.\u003c\/p\u003e\u003cp\u003eOutput Gain: The output level may be attenuated or amplified by up to 20dB to compensate for level changes caused by compression. This control comes directly before the Peak Limiter detector and this fact should be taken into account when setting the Peak Limiter threshold.\u003c\/p\u003e\u003cp\u003ePeak Limit: This control sets an absolute limit that the output signal will not be permitted to exceed. The limiter is ‘zero response time’ and controls peaks without any audible distortion. For transparent ‘peak protection’ the output gain control should be set to ensure that the Peak Limiter operates only occasionally. Alternatively, the unit can be driven into heavy limiting for creative effects.\u003c\/p\u003e\u003cp\u003eInput\/Output Bargraph Meter: An eight segment LED bargraph level meter monitors the output signal level over a range of -20dB to +15dB. When Bypass is selected this meter reads input level.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447208058938,"sku":"DRA-MXPRO-30","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MX30_Dual_Gated_Compressor_Limiter_1780728587-01.jpg?v=1780728781"},{"product_id":"drawmer-mx50-dual-vocal-de-esser","title":"Drawmer MX50 Dual Channel De-Esser","description":"\u003cp\u003eThe Human voice is one of the most diverse signals ever encountered by engineers because it contains such large variations in level and harmonic structure. Getting the desired vocal sound can sometimes prove difficult. Setting the E.Q. to give the vocal sufficient ‘definition’ and ‘cut’ in the mix can cause large sibilant peaks which often lead to severe distortion. The MX50 Pro ‘Vocal’ De-Esser solves these problems quickly and efficiently by reducing the level of the sibilant sounds whilst leaving the remainder of the signal unchanged.\u003c\/p\u003e \u003cp\u003eSplit Band de-essing: Recommended for the majority of applications, this mode splits the audio spectrum into two bands with the split point being dictated by the position of the Frequency control. Only frequencies above the split point are attenuated.\u003c\/p\u003e\u003cp\u003eFull Band de-essing : A useful alternative where unobtrusive minimal processing is required. This mode reduces the total signal level in response to sibilant peaks in the selected frequency band.\u003c\/p\u003e\u003cp\u003eFloating Threshold System : This intelligent Drawmer circuitry has a floating Threshold that adapts to the dynamics and level of the incoming material, eliminating the need for a manual Threshold control and creating more natural results.\u003c\/p\u003e\u003cp\u003eAir function : As sibilance rarely occurs above 10KHz this feature adds back high frequency ‘gloss’ in excess of 12KHz preserving upper harmonics and increasing the transparency of operation.\u003c\/p\u003e\u003cp\u003eFrequency : This control selects the frequency band in which the de-esser operates. In Split Band mode this control also determines the split point above which gain reduction will take place. The control is continuously variable from 800Hz to 8KHz and covers the full sibilant range.\u003c\/p\u003e\u003cp\u003eDe-Ess : Adjusts the amount of gain reduction that will take place when a sibilant sound has been detected. Up to a maximum of 20dB may be applied. This control uses an intelligent Floating Threshold circuitry which removes the need for a manual De-Ess Threshold control. One of the benefits of this design approach is that during quiet passages the sibilants are held to a level which is relative to the original signal.\u003c\/p\u003e\u003cp\u003eSplit Band De-Ess : Split Band operation will only reduce the selected frequencies above the value set via the Frequency control. In most situations this mode, in conjunction with the Air function, offers the most transparent de-essing. Status LED illuminates when engaged.\u003c\/p\u003e\u003cp\u003eFull Band De-Ess : Full Band operation will reduce the total signal level in response to signals in the selected frequency band. Status LED illuminates when engaged.\u003c\/p\u003e\u003cp\u003eAir : The Air control enables frequencies above the sibilant band to be retained, greatly increasing transparency of the de-essing process. During normal use it is recommended to keep the Air function active for both Split Band and Full Band de-essing. Status LED illuminates when engaged.\u003c\/p\u003e\u003cp\u003eLink : Depressing this switch configures the unit for stereo operation where the average left\/right signal level is used as the Floating Threshold. In linked mode the red status LED beneath the link switch will illuminate.\u003c\/p\u003e\u003cp\u003eDe-Ess Gain Reduction Display : A nine segment LED bargraph shows how much gain reduction is being applied up to a maximum of 20dB. In Full Band mode gain reduction is applied to the whole signal, whilst in Split Band mode only frequencies above the value set on the frequency control are subject to gain reduction.\u003c\/p\u003e\u003cp\u003eBypass : The Bypass position routes the input signal to the output with no processing. These switches are independant of any linking and will only bypass their respective channel. Status LED illuminates when engaged.\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447208517690,"sku":"DRA-MXPRO-50","price":865.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_MX50_Dual_Vocal_De-Esser_1780728600-01.jpg?v=1780728605"},{"product_id":"drawmer-sl22-stereo-level-limiter","title":"Drawmer SL22 Stereo Level Limiter","description":"\u003cp\u003eWhether you need to protect your speakers, your hearing whilst listening to headphones or your premises license the Drawmer SL22 Sound Level Limiter is the perfect tool for the job. By eliminating the possibility of ’unauthorised’ excessive sound pressure levels it offers strict level control and tremendous peace of mind to users.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eLimited speaker and headphone outputs\u003c\/li\u003e\n\u003cli\u003eOnce installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels\u003c\/li\u003e\n\u003cli\u003eNo sound quality loss even during protection processing\u003c\/li\u003e\n\u003cli\u003eLarge LED level indication for ’at a glance’ monitoring of signals and warnings\u003c\/li\u003e\n\u003cli\u003eTime delay relays on outputs for clean power up\/down\u003c\/li\u003e\n\u003cli\u003eFast, simple installation\u003c\/li\u003e\n\u003cli\u003eTamper-proof plate limits access to settings\u003c\/li\u003e\n\u003cli\u003eA security label is supplied to further secure the calibration settings and show evidence of tampering\u003c\/li\u003e\n\u003cli\u003eTamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.\u003c\/li\u003e\n\u003cli\u003eReduces ’call-out’ costs of sound system service\/repair engineers, sound system ’down time’ and the consequential loss of venue income, as well as the reputation of the venue.\u003c\/li\u003e\n\u003cli\u003eExternal control of Dim and Mute for connection to Fire Alarms or remote operation\u003c\/li\u003e\n\u003cli\u003eTrigger output when in PROTECT mode\u003c\/li\u003e\n\u003cli\u003eLogging inputs for both ALERT and PROTECT statuses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447208812602,"sku":"DRA-SL22","price":1299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_SL22_Stereo_Level_Limiter_1780728611-01.jpg?v=1780728793"},{"product_id":"drawmer-sp2120-speaker-protector","title":"Drawmer SP2120 Speaker Protector","description":"\u003cp\u003eThe Drawmer SL2120 is a hard limiter to ensure sound levels don’t exceed a specific volume. Designed for clubs where a noise restriction is in place. It can also protect you speakers from anyone trying to turn up the volume without your pemrission.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eTakes only minutes to install.\u003c\/li\u003e\n\u003cli\u003eTamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.\u003c\/li\u003e\n\u003cli\u003eDual 16 segment Left\/Right bargraphs for ’at a glance’ level metering.\u003c\/li\u003e\n\u003cli\u003e’Protection’ processing 16 segment bargraph display.\u003c\/li\u003e\n\u003cli\u003eNo sound quality loss even during heavy protection processing.\u003c\/li\u003e\n\u003cli\u003eOnce installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels.\u003c\/li\u003e\n\u003cli\u003eEliminates sound system abuse and the resulting cost of chassis speaker re-cones, HF diaphragm replacements and amplifier repairs.\u003c\/li\u003e\n\u003cli\u003eReduces ’call-out’ costs of sound system service\/repair engineers.\u003c\/li\u003e\n\u003cli\u003eReduces sound system ’down time’ and the consequential loss of venue income.\u003c\/li\u003e\n\u003cli\u003eIsolation transformer output option.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447209205818,"sku":"DRA-SP2120","price":1499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_SP2120_Speaker_Protector_1780728625-01.jpg?v=1780728807"},{"product_id":"drawmer-mq-1-500-series-mono-7-band-equaliser","title":"Drawmer MQ-1 500 Series Mono 7-Band Equaliser","description":"\u003cdiv class=\"content_header_text\"\u003e\n\u003ch3\u003e\u003cstrong\u003eVintage E.Q. with CRUSH\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eTaking inspiration from the legendary ‘Motown EQ’, the MQ-1 is a single channel 7 band proportional Q Equaliser with EQ curves akin to the renowned EQ’s used in the illustrious Detroit studios in the 1960’s.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eThis 100% analogue EQ, features 7 bell curves, each having a variable cut\/boost of ±10dB and set at the beautifully musical frequencies of the original.\u003c\/p\u003e\n\u003cp\u003eThe proportional-Q design ensures the bandwidth of each band adjusts automatically with gain, providing a more intuitive and musical EQ experience.\u003c\/p\u003e\n\u003cdiv class=\"content_header_text\"\u003e\n\u003ch3\u003e\u003cstrong\u003eAdded Crush\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eBut it doesn’t stop there, what truly sets the MQ-1 apart is its inclusion of the highly regarded ‘CRUSH’ feature present on the Drawmer 1971. When you activate the crush circuit, get ready for some pleasing harmonic saturation and that classic analogue warmth that adds a ton of character to any signal passing through the unit. The result? It fattens up the bass, adds presence to the mids, and brings a delightful shimmer to the top end. The harder you drive the EQ the more Crush you’ll get!\u003c\/p\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447217954874,"sku":"DRA-MQ-1","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_MQ-1frontv2_800x_2000x_bb2061cb-fa5a-404b-8520-4638e9a44b9f.jpg?v=1780729983"},{"product_id":"drawmer-mq-2-500-series-stereo-7-band-equaliser","title":"Drawmer MQ-2 500 Series Stereo 7-Band Equaliser","description":"\u003cdiv class=\"content_header_text\"\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eTaking inspiration from the legendary ‘Motown EQ’, the MQ-2 is a stereo, 7 band proportional Q Equaliser with EQ curves akin to the renowned EQ’s used in the illustrious Detroit studios in the 1960’s.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center mb-5\"\u003eHowever, the MQ-2 is not only an EQ, it also incorporates an effortless to use one knob compressor as well as added Crush harmonics to tame and add warmth to your audio.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eThis 100% analogue EQ, features 7 bell curves, each having a variable cut\/boost of ±10dB and set at the beautifully musical frequencies of the original.\u003c\/p\u003e\n\u003cp\u003eThe one knob compressor is incredibly simple to use. Being programme dependant it will adapt the attack and release characteristics to the signal and alter the envelope to suit to tame the audio. In addition, it has an influence on the Crush feature - the more compression you use the more of the Crush effect you will get.\u003c\/p\u003e\n\u003cp\u003eThe EQ and compressor order can be swapped in the signal path to suit your preference.\u003c\/p\u003e\n\u003cp\u003eWith clear metering for both the compressor gain reduction and also the stereo output its easy to set the MQ-2 to the optimum levels.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eBut what truly sets the MQ-2 apart is its inclusion of the celebrated \"CRUSH\" circuit, featured on the Drawmer 1971.\u003c\/p\u003e\n\u003cp\u003eEngage the CRUSH circuit, and the MQ-2 transforms into more than just an EQ and compressor — it evolves into a powerful saturation tool. Harmonic richness, subtle distortion, and that elusive \"analogue warmth\" is added to the signal, bringing new life and colour to anything that passes through this. It fattens up the bass, adds presence to the mids, and brings a delightful shimmer to the top end.\u003c\/p\u003e\n\u003cp\u003eThe more boost you give to EQ frequencies and the more Compression you use the more Crush you’ll get!\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eProudly designed and manufactured in our UK factory, the MQ-2 embodies the Drawmer commitment to quality, precision, and sonic excellence.\u003c\/p\u003e\n\u003cp\u003eWhether you're chasing the soulful tones of the past or shaping new tones of your own, the MQ-2 is the tool that will bring your music to life with unmistakable warmth, depth, and detail.\u003c\/p\u003e\n\u003cul class=\"webtext-block--colcount\"\u003e\n\u003cli\u003eStereo 500 Series 7-band parametric EQ\/compressor\u003c\/li\u003e\n\u003cli\u003eDouble-wide module with all-analog circuitry\u003c\/li\u003e\n\u003cli\u003eProportional-Q equalizer design\u003c\/li\u003e\n\u003cli\u003eWarm, punchy, vintage-flavored sound\u003c\/li\u003e\n\u003cli\u003eInspired by the “Motown EQ” of the 1960s\u003c\/li\u003e\n\u003cli\u003eHighly musical frequency bands of the original\u003c\/li\u003e\n\u003cli\u003e10dB boost or cut per band\u003c\/li\u003e\n\u003cli\u003eCrush mode adds harmonic saturation\u003c\/li\u003e\n\u003cli\u003eProgram-dependent 1-knob compressor\u003c\/li\u003e\n\u003cli\u003eOrder button swaps EQ and compressor in the signal path\u003c\/li\u003e\n\u003cli\u003eGain control and hard-wired bypass\u003c\/li\u003e\n\u003cli\u003eGR and Stereo Level LED meters\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447218544698,"sku":"DRA-MQ-2","price":799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_drawmer-mq2.jpg?v=1780730066"},{"product_id":"drawmer-mxpro-60-front-end-one-channel-strip-rack","title":"Drawmer MXPRO 60 Front End One Channel Strip Rack","description":"\u003cdiv class=\"content_header_text\"\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003eThe MX60-Pro Front End One is a unique mic\/line\/instrument input channel in a single rack space providing high quality Drawmer processing prior to tape\/hard disc recording. The MX60 is also ideally suited to project studio and live sound applications. Functioning as a studio grade mic pre-amp, Program AdaptiveTM gate, de-esser, compressor, limiter, three band EQ and multi band tube saturation stage, the MX60 offers the user more options than competitive units currently available.\u003c\/p\u003e\n\u003cdiv class=\"content_header_text\"\u003e\n\u003ch3\u003e\u003cstrong\u003eThe Controls\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eInput Stage:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe input stage may be switched to accept mic, line, or instrument level signals - the XLR mic input has switchable 48V phantom power and phase reverse, while the line input is on both a balanced +4dB TRS jack and an unbalanced -10dB jack. A high impedance Instrument jack is located on the front panel for use with electric guitars, basses, synths and drum machines.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eProgram Adaptive Gate:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDrawmer's proprietary Program AdaptiveTM circuitry means that all the time constants are automatically optimised for the material being processed. This enables stable gating and eliminates 'chatter' around threshold. Controls via a single variable threshold and switchable fast\/slow auto release.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eDe-Esser:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eFloating threshold de-ess operation where the de-esser automatically and continually readjusts its own threshold level. The MX60 de-esser is almost completely automatic requiring the user only to select a switchable male or female setting and to adjust the amount of de-essing required. Only the sibilant sounds are subjected to gain reduction so that the lisping effect of simpler de-essers is avoided.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eEQ:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eHigh and low shelving sections as well as fully parametric mid range EQ with variable frequency, 'Q', and ±18dB cut\/boost.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eHigh quality VCA compressor based on that of the MX30 and DL241. Both the attack and release times are Program AdaptiveTM leaving the user with only ratio, threshold and make-up gain to adjust.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eTubesound:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eMulti band 'tube saturation' allows users to create subtle warming, high frequency effects or out-and-out obvious effects via three separate, independently adjustable audio bands. Low settings on all bands enable replication of classic tube mic sounds.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center my-4\"\u003e\u003cb\u003e\u003cstrong\u003eOutput:\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe output stage includes a limiter with a preset threshold (+16dB) and a variable master fader with output bargraph metering which sets the overall output level from OFF to +15dB. A two stage soft\/hard limiting approach has been adopted with yellow and red LEDs signifying soft (approaching limit point) and hard limiting (hitting limit point).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447219626042,"sku":"DRA-MXPRO-60","price":1599.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_pp_mx60pro_front_2000x_470fa881-7209-42b3-904e-d7e7d628efd1.jpg?v=1780730211"},{"product_id":"drawmer-1970-dual-fet-compressor-pre-amplifier","title":"Drawmer 1970 Dual Channel FET Compressor \u0026 Preamp","description":"\u003cdiv\u003e\n\u003cp\u003eThe 1970 Dual F.E.T. Compressor and Pre-Amplifier builds on a heritage inspired by the first pro audio \"tool box\" compressor, the illustrious Drawmer 1960, but with a greatly expanded feature set, making it one of the most adaptable mic preamplifier\/compressors on the market today. Bringing vintage audio characteristics at an affordable price.\u003c\/p\u003e \u003cp\u003eWhilst the feature set of the 1970 is similar to the Drawmer 1960, and the layout of the controls will add to the comparisons, the 1970 has been greatly improved and the D.I. EQ has been fine tuned to be more accurate than its stable-mate, with various enhancements.\u003c\/p\u003e \u003cp\u003eThe 1970 use the latest THAT Corporation technology in the 2 mic preamps to provide ultra clean, transparent and precise recordings that can be processed at a later stage using your favourite warming method, be it saturation, valve, transformer or tape. In addition each channel is capable of 66dB of gain, with switchable mic impedance for accurate mic matching to bring out the best from any microphone used. Phantom power, phase reverse and a high pass filter are also included.\u003c\/p\u003e \u003cp\u003eFrom tracking instruments via the dedicated D.I. input, to recording vocals via the ultra clean mic pre's, recording a guitar cabinet with two microphones, or a singer playing guitar, or even stereo buss compression using the comprehensive linking and mix facilities, the 1970 is the perfect versatile tool for any studio or live event.\u003c\/p\u003e \u003cp\u003e2017 is shorter, lighter and easier to use than competitive mics. Its smaller dimensions allow it to fit in smaller wind protection units and, since there are no buttons to push on it, you can place it in its protection unit and forget about it.\u003c\/p\u003e \u003cp\u003eWith an extreme SPL (Sound Pressure Level) handling of 143 dB SPL Peak, low self-noise of 13 dB(A) and a 130 dB dynamic range, the 2017 excels where other good shotgun microphones fail, making it useful in applications where shotguns traditionally do not perform well.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eTwo THAT Corporation ultra clean mic pre's with 66dB of gain with phantom power and switchable mic impedance for accurate mic matching\u003c\/li\u003e \u003cli\u003eSeparate Line \u0026amp; Mic input XLR's\u003c\/li\u003e \u003cli\u003eA pro quality instrument DI input with low and high EQ\u003c\/li\u003e \u003cli\u003eCan be used as 2 mono tracking compressors or 1 stereo buss compressor (avoiding image shifting) via the class leading comprehensive linking facilities\u003c\/li\u003e \u003cli\u003eFETs can be bypassed altogether to provide ultra clean outputs\u003c\/li\u003e \u003cli\u003eStandard controls such as Threshold, Ratio, Attack \u0026amp; Release, with 8 LED GR Metering on each band\u003c\/li\u003e \u003cli\u003eRear panel Side-chain insert points provide even further control\u003c\/li\u003e \u003cli\u003e‘Big’ and 'Air' Modes Help to preserve the very deep lows and Enhance the sparkling highs\u003c\/li\u003e \u003cli\u003eVariable Wet\/Dry Mix plus Output Gain knobs on both channels give a 'Parallel Compression' function without the need for external mixing devices, providing complete and effortless control over the amount of compression used and output levels\u003c\/li\u003e \u003cli\u003eTwo backlit Analogue V.U. Meters with Switchable +10dB Rescale Mode. Time delay relays on outputs for clean power up\/down\u003c\/li\u003e \u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel\u003c\/li\u003e \u003cli\u003eDesigned and Handmade by Drawmer in the United Kingdom\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1970_dual_fet_compressor.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220019258,"sku":"DRA-1970","price":2549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1970_Dual_FET_Compressor___Pre-Amplifier_1780730326-01.jpg?v=1780730335"},{"product_id":"drawmer-1971-dual-parametric-equaliser-w-crush","title":"Drawmer 1971 Dual Channel Parametric Equaliser w\/ Crush","description":"\u003cdiv\u003e\n\u003cp\u003eThe 1971 offers 2 channels of fully featured 4-band parametric EQ. It has the ability to perform subtle shaping for mastering purposes that require a delicate touch and easy recall, but is just as capable of tonal sculpting, adding the analogue warmth and character that is near impossible to emulate in the digital domain.\u003c\/p\u003e \u003cp\u003eA feature that is unique to the 1971 is the CRUSH button. A switchable option available on each band, it adds a fixed time constant, auto gain makeup compressor, whilst also giving a wider rounder bandwidth. In addition it introduces some musically pleasing harmonics. It'll Fatten your bass, enhance the Presence of your mids, and bring out the Shimmer in the top end.\u003c\/p\u003e \u003cp\u003eThe versatile design features dual channel precision stepped potentiometers, providing exceptional accuracy for fast and simple recall. All four bands have fully variable frequency controls and each offer a cut and boost function. Additionally, the two mid bands have completely variable filter bandwidth controls, enabling the user to focus on very narrow sections of the audio spectrum, or apply a broad natural sounding filter, and anything in between. Fully adjustable low and high cut filters are also included, ideal for tuning out undesirable signals at the frequency extremes.\u003c\/p\u003e \u003cp\u003eIt also features switchable slopes on the low and high bands, allowing you to alter the focus at the top and bottom frequencies, plus a low peak setting that magnifies the bottom end. The 1971 is perfect for tonal shaping, staying true to the sound of the 70s and ideal for any recording engineer or musician.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eVintage-style dual four band Parametric Equalisation which takes it’s inspiration from 1970’s-era analogue gear.\u003c\/li\u003e \u003cli\u003eDelivers classic sonic clarity and control at an affordable price.\u003c\/li\u003e \u003cli\u003eIndented and accurate potentiometers, providing precision for quick and simple recall.\u003c\/li\u003e \u003cli\u003eVariable low and high cut filters allow you to perfectly tune out any undesirable signals.\u003c\/li\u003e \u003cli\u003eFully variable bandwidth provides absolute control for the parametric mid bands.\u003c\/li\u003e \u003cli\u003eSwitchable slope plus low peak settings allows you to adjust the focus and magnify the bottom end.\u003c\/li\u003e \u003cli\u003eSwitchable Crush on each band provides Fatness, Presence and Shimmer.\u003c\/li\u003e \u003cli\u003eTrue hardware bypass for each band and also the unit provides accurate A\/B comparisons.\u003c\/li\u003e \u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch.\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel.\u003c\/li\u003e \u003cli\u003eDesigned and Handmade by Drawmer in the United Kingdom.\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1971_peq.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220084794,"sku":"DRA-1971","price":2549.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1971_Dual_Parametric_Equaliser_w_Crush_1780730348-01.jpg?v=1780730357"},{"product_id":"drawmer-1972-dual-channel-preamp","title":"Drawmer 1972 Dual Channel Preamp","description":"\u003cdiv\u003e\n\u003cp\u003eThe 1972 Dual Mic, Line \u0026amp; Instrument Pre-Amplifier has been developed to make it ultra easy for you to capture perfect recordings every time. The 1972 gives you the ability to record pristine audio from a variety of sources and especially makes the most of the multitude of microphones that you find in the studio, from budget to high-end dynamic and also ribbon mics. Uniquely it has added features that help out in difficult to record situations that are not found on other preamplifiers.\u003c\/p\u003e \u003cp\u003eThe 1972 uses the latest THAT Corporation technology in the two independent mic preamps to provide ultra clean, transparent and precise recordings, that can be processed at a later stage using your favourite methods, be it compression, E.Q., saturation, valve, transformer or tape. Each channel is capable of 66dB of stepped gain, with an additional +\/-12dB’s trim at the output, and incorporates switchable mic impedance for accurate mic matching to bring out the best from any microphone used, and also provides a way to “sculpt” the sound of passive dynamic, and especially low-impedance ribbon microphones.\u003c\/p\u003e \u003cp\u003eAs well as standard features that you will find on most preamplifiers, such as phase reverse, the 1972 also has a wealth of tools that help when recording difficult sources, making it possible to get the best quality recording with ease: Fully variable LoCut and HiCut controls have been included to allow you to tune into recordings and remove superfluous signals in the low and high frequencies, removing rumble and hiss with ease. In addition the Shape feature allows you to bring out the bass or treble using a subtle tilt EQ.\u003c\/p\u003e \u003cp\u003eA unique feature that has been developed by Ivor Drawmer and currently only available on the 1972 is the Lift control. Lift is essentially a low level dynamic gain module which has no effect on signals above 0dB. This makes it possible to record very quiet signals in a transparent and natural way without distortion and clipping taking place on the louder passages, and is especially effective for very dynamic signals, finding great use in recording piano, and on all vocals, including speech, and for capturing ambience.\u003c\/p\u003e \u003cp\u003eYou may have encountered the general rule that the impedance of the preamp input should be 10X that of the mic to get an input impedance that is appropriate for the mic and to avoid loading the source, however, it is less known that mismatching can create some interesting tonal differences that can be used more creatively. The 1972 has 3 settings per mic input: 200, 600 and 2400 Ohms, making it easy for you to explore the various tones. The result will depend on the microphone used, as the tonal changes will be obvious with some mic’s but others will hardly alter, and on the material you're working with.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eTwo THAT Corporation ultra clean mic pre's with 66dB of gain in 6dB steps, plus +\/-12dB’s trim at the output\u003c\/li\u003e \u003cli\u003eSeparate Line \u0026amp; Mic input XLR's on the rear plus a pro quality instrument DI input on the front panel\u003c\/li\u003e \u003cli\u003eCan be used on a multitude of sources including instruments and all type of microphones in the studio from low to high end, plus ribbon mics\u003c\/li\u003e \u003cli\u003eSwitchable Mic Impedance for accurate mic matching and also mic tone sculpting\u003c\/li\u003e \u003cli\u003eA wealth of features not found on other preamps make it ease to capture difficult to record sources\u003c\/li\u003e \u003cli\u003eUnique Lift feature for boosting very low signals without the loud signals clipping\u003c\/li\u003e \u003cli\u003eFully variable LoCut and HiCut filters to tune into signals and remove unwanted sounds\u003c\/li\u003e \u003cli\u003eShape switches are included to control bass and treble using a subtle tilt EQ\u003c\/li\u003e \u003cli\u003ePhantom Power and Phase Reverse\u003c\/li\u003e \u003cli\u003eTwo backlit Analogue V.U. Meters with Switchable +10dB Rescale Mode\u003c\/li\u003e \u003cli\u003eTime delay relays on outputs for clean power up\/down\u003c\/li\u003e \u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel\u003c\/li\u003e \u003cli\u003eDesigned and Handmade by Drawmer in the United Kingdom\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1972_dual_mic_preamp.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220150330,"sku":"DRA-1972","price":1849.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1972_Dual_Channel_Preamp_1780730372-01.jpg?v=1780730378"},{"product_id":"drawmer-1974-stereo-parametric-equaliser","title":"Drawmer 1974 Stereo Parametric Equaliser","description":"\u003cdiv\u003e\n\u003cp\u003eThe vintage-style fully stereo 1974 four band Parametric Equaliser provides exceptional analogue musicality and sonic clarity, taking it's inspiration from 1970's-era gear. It has the ability to perform subtle shaping for mastering purposes that require a delicate touch and easy recall, but is just as capable of tonal sculpting, adding the analogue warmth and character that is near impossible to emulate in the digital domain.\u003c\/p\u003e \u003cp\u003eGet immersive with the stereo operation, with one set of controls for both channels. The versatile design features dual channel precision stepped potentiometers, providing exceptional accuracy for fast and simple recall. The fully variable bandwidth allows you to control the parametric mid bands, making adjustments as surgically precise or as broad and natural sounding as you could ever require. Fully adjustable low and high cut filters are also included, ideal for tuning out undesirable signals at the frequency extremes. It also features a switchable slope allowing you to alter the focus at the high and low frequencies plus a low peak setting that magnifies the bottom end. The 1974 is perfect for tonal shaping, staying true to the sound of the 70s and ideal for any musician.\u003c\/p\u003e \u003cp\u003eThe genuine stereo linked operation of the 1974 makes adjustment quick and extremely simple using just one set of controls to alter both channels. Gone is the wasted time spent fiddling about on every control trying to match the settings of the left and right channels with each other. The 1974 uses precision potentiometers, each one being matched for left\/right accuracy to within fine tolerances by our trained technicians, so that both channels operate identically, and also have indented operation, providing exceptional accuracy for fast and simple recall.\u003c\/p\u003e \u003cp\u003eThe 1974 is a true 'parametric' equaliser, with the four bands having fully variable frequency controls and offer cut and boost of +\/-12dB's. However, unlike EQ's with a no bandwidth adjustment, or a simple switch, the two mid bands have completely variable filter bandwidth controls enabling the user to focus in on very narrow sections of the audio spectrum or apply a broad natural sounding filter, or, of course, anything in between the two. This makes the 1974 incredibly versatile and capable of modifying everything from subtly fine tuning mixes to tone sculpting problematic recordings.\u003c\/p\u003e \u003cp\u003eThe 1974 also includes fully variable low and high cut filters, ideal for tuning out undesirable signals. The low cut (otherwise known as High Pass Filter) having a range of 10Hz-225Hz and the high cut (otherwise known as Low Pass Filter) 4kHz-32kHz. The beauty of being fully variable is that, unlike fixed frequency filters, it is easy to sweep both controls to find the perfect setting and remove sounds with pinpoint accuracy. This is especially useful when bracketing individual tracks where it will be necessary to cut the bass to remove rumble and top to remove hiss, as these undesirable signals will just add up as the tracks are layered. For instance, cut everything instrument below 100Hz except those within that spectrum, such as the kick, bass or synths etc to provide extra headroom to work and also tighten up the bass making it sound less muddy. And likewise for the high frequencies.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eVintage-style four band Parametric Equalisation.\u003c\/li\u003e \u003cli\u003eClassic sonic clarity and control at an affordable price.\u003c\/li\u003e \u003cli\u003eGenuine stereo operation with one set of controls for both channels.\u003c\/li\u003e \u003cli\u003eIndented and accurate potentiometers, providing precision for quick and simple recall.\u003c\/li\u003e \u003cli\u003eVariable low and high cut filters.\u003c\/li\u003e \u003cli\u003eFully variable bandwidth provides absolute control for the parametric mid bands.\u003c\/li\u003e \u003cli\u003eSwitchable slope plus low peak settings.\u003c\/li\u003e \u003cli\u003eTrue hardware bypass for accurate A\/B comparisons.\u003c\/li\u003e \u003cli\u003eInternal low hum toroidal linear power supply with voltage selector switch.\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1974_parametric_eq.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220215866,"sku":"DRA-1974","price":1849.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1974_Stereo_Parametric_Equaliser_1780730385-01.jpg?v=1780730392"},{"product_id":"drawmer-1976-stereo-three-band-saturation-width-processor","title":"Drawmer 1976 Stereo Three Band Saturation \u0026 Width Processor","description":"\u003cdiv\u003e\n\u003cp\u003eThe 1976 3 band stereo saturation and width processor has been designed to inject character, colour \u0026amp; life into your recordings and live sound in a style endemic of the classic equipment of the 1970's. The completely analogue saturation of the 1976 will provide the realism that plug-ins can only aspire to, replacing the harsh, sterile digital sound with fullness, softness and warmth. Why emulate saturation when you can have the real thing?\u003c\/p\u003e \u003cp\u003eInspired by the highly acclaimed saturation and width features of our DC2476 Digital Mastering Processor the 3 bands of independent saturation of the 1976 have been designed to add the pleasing imperfections that are so endemic in classic gear. Saturation is ideal for adding fullness to your music, taking your music from a cold, bleak landscape to a warm, bright vista.\u003c\/p\u003e \u003cp\u003eIn addition, however, unlike conventional saturation products the 1976 also features 3 bands of stereo width control to really bring out the depth and add real presence to your mix, and all with a single, yet comprehensive set of controls that provide genuine stereo operation.\u003c\/p\u003e \u003cp\u003eBecause the 1976 as 3 bands of independent saturation it can pull off amazing feats that single-band saturation could never accomplish. For example, it can bring out the bassline, adding presence and grit without ruining the overall balance within the mix by adding distortion to the top end. Or enhance the vocals without making the bottom sound muddy.\u003c\/p\u003e \u003cp\u003eThe layout of the 1976 has been designed to be as simple, familiar and intuitive as possible whilst still giving complete control over the audio.\u003c\/p\u003e \u003cp\u003eThe front panel consists of an Input control that allows you to optimise the input level should it be to low, or hot. This is followed by three identical Low, Mid and High Saturation and Width bands, flowing left to right, with the Variable Crossover Frequency knobs separating them. To the right are the Output controls to optimise the output level.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003ePowerful 3 Band all-analogue saturation for adding warmth.\u003c\/li\u003e \u003cli\u003eDesigned to inject character to your audio.\u003c\/li\u003e \u003cli\u003e3 band fully adjustable stereo width.\u003c\/li\u003e \u003cli\u003eFully Variable Crossover controls.\u003c\/li\u003e \u003cli\u003eGenuine stereo operation with one set of controls for both channels.\u003c\/li\u003e \u003cli\u003eCan operate in stereo and mono.\u003c\/li\u003e \u003cli\u003eThe mono switch helps highlight problems within the stereo mix.\u003c\/li\u003e \u003cli\u003eInternal low hum toroidal linear power supply with voltage selector switch.\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1976_three_band_saturation.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220248634,"sku":"DRA-1976","price":1849.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1976_Stereo_Three_Band_Saturation___Width_Processor_1780730404-01.jpg?v=1780730412"},{"product_id":"drawmer-1977-2u-analog-channel-strip","title":"Drawmer 1977 2RU Analog Channel Strip","description":"\u003cdiv\u003e\n\u003cp\u003eIf you're looking to add vintage characteristics and analog musicality to your recordings then look no further than the 1977, Drawmer's most comprehensive channel strip to date.\u003c\/p\u003e \u003cp\u003eThe 1977 gives you the clarity of an ultra clean preamplifier, the precision of the three band parametric equaliser, the silkiness of the soft knee compressor and added to this the ability to dial in as much warmth as you desire via the 3 types of variable harmonic saturation.\u003c\/p\u003e \u003cp\u003eThe pristine preamplifier not only incorporates mic, line and instrument D.I. with 66dB of stepped gain, allowing you to make ultra clean, transparent and precise recordings, sweeten up dull audio or perfect your guitar sound, but also mic matching via switched impedance that brings out the best of every mic in your studio. Whether high-end, ribbon or even your dullest mic you will be able to find it's sweet spot.\u003c\/p\u003e \u003cp\u003eThe 1977 incorporates a true 'parametric' equaliser, with three bands of fully variable frequency control and cut and boost of +\/-12dB's and, in addition, a fully variable bandwidth control of the mid band, making it incredibly versatile and capable of modifying everything from subtle fine tuning to tone sculpting problematic recordings, and, of course, anything in between.\u003c\/p\u003e \u003cp\u003eA full featured compressor allows you to control the dynamics of your recordings and the 'Big' and 'Air' modes help to preserve the very deep lows and enhance the sparkling highs that lesser compressor's remove. The compressor section also incorporates variable harmonic Saturation with a choice of 3 styles, that will allow you to warm up your recordings with complete precision.\u003c\/p\u003e \u003cp\u003eThe output section includes a wet\/dry mix for parallel processing that allows you to easily dial in how much EQ and compression is used via a single knob. Finally the 1977 has an output fade control to either add fade outs or to boost the level to match high end audio interface audio input levels, along with a large backlit VU meter for accurate monitoring.\u003c\/p\u003e \u003cp\u003eThe result of all these features is a modern take on vintage gear that gives you an incredible degree of control over the clarity, tone and warmth of your recordings, helping you to capture perfect audio every time.\u003c\/p\u003e \u003ch5\u003eFeatures\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eA THAT Corporation ultra clean mic preamplifier with 66dB of gain with phantom power and switchable mic impedance for accurate mic matching\u003c\/li\u003e \u003cli\u003eSeparate Line \u0026amp; Mic input XLR's and pro quality instrument DI input with through output. Plus an XLR for the dedicated ultra clean direct pre-amp output and also for the overall output\u003c\/li\u003e \u003cli\u003eFETs can be bypassed altogether to provide ultra clean outputs. A variable high pass filter control removes any rumble and allows you to tighten up the bottom end\u003c\/li\u003e \u003cli\u003ePhase reverse\u003c\/li\u003e \u003cli\u003eVintage-style three band full parametric EQ which takes it's inspiration from 1970's-era analogue gear, with variable frequency, +\/-12dB cut and boost and variable bandwidth. Switchable slopes plus low peak settings allows you to adjust the focus and also magnify the bottom and top ends\u003c\/li\u003e \u003cli\u003eCompressor includes standard controls and also 'Big' and 'Air' Modes Help to preserve the very deep lows and enhance the sparkling highs\u003c\/li\u003e \u003cli\u003eRear panel Side-chain insert point provides even further control\u003c\/li\u003e \u003cli\u003e3 types of variable Saturation adds vintage warmth\u003c\/li\u003e \u003cli\u003eThe order of the EQ and Compressor can be swapped and also each can bypassed to allow for comparisons\u003c\/li\u003e \u003cli\u003eVariable Wet\/Dry Mix plus Output Gain knobs give a 'Parallel E.Q. and Compression' function without the need for external mixing devices, providing complete and effortless control over the amount of equalisation and compression used and output levels\u003c\/li\u003e \u003cli\u003eA backlit Analogue V.U. Meter with Switchable +10dB Rescale Mode\u003c\/li\u003e \u003cli\u003eTime delay relays on the output for clean power up\/down\u003c\/li\u003e \u003cli\u003eInternal Low Hum Toroidal Linear Power Supply with Voltage Selector Switch\u003c\/li\u003e \u003cli\u003eClassic Drawmer build quality with rugged steel chassis and aluminium front panel\u003c\/li\u003e \u003cli\u003eDesigned and Handmade by Drawmer in the UK\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"manufacturer-site\"\u003e\u003cdiv class=\"container\"\u003e\u003cspan\u003eFor more information, please visit the \u003ca href=\"https:\/\/www.drawmer.com\/products\/70s_series\/1977_channel_strip.php\" target=\"_blank\"\u003emanufacturer's website\u003c\/a\u003e.\u003c\/span\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220281402,"sku":"DRA-1977","price":2549.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/Drawmer_1977_2U_Analog_Channel_Strip_1780730423-01.jpg?v=1780730432"},{"product_id":"drawmer-cmc7-surround-monitor-controller","title":"Drawmer CMC7 Surround Monitor Controller","description":"\u003cp class=\"card-text align-self-center my-4\"\u003eThe CMC7 is a compact 8 channel \/ 7.1 \/ 5.1 surround volume controller and cost-effective alternative to the more complex and feature rich MC7.1. In order to maintain it's compact proportions and to keep the product budget friendly the CMC7 does away with controls that can often be found within your workstation software and concentrates on essential features such as ease of use and the quality of the signal path, ensuring that the audio is transparent and accurate across all channels and operation intuitive.\u003c\/p\u003e\n\u003cp class=\"card-text align-self-center mb-5\"\u003eWhether it is producing audio for film or television, or transporting the listener directly into the venue of an all-encompassing orchestral piece, one thing is sure, the number of users that wish to listen to audio within a surround setting has been growing and will continue to do so. There has been an ever-increasing number of surround products coming to market, not only blue ray players and home cinema but also on mobile and media devices. For example, Apple devices have been capable of reproducing 7.1 surround since iOS 9.3. Therefore, it is likely that at some point every artist and engineer will consider trying surround sound, or fear being left behind. The budget friendly CMC7 allows you to do this without the large financial outlay that other setups will produce.\u003c\/p\u003e\n\u003cul class=\"feature\"\u003e\n\u003cli\u003eUltra low noise and transparent circuit design.\u003c\/li\u003e\n\u003cli\u003eAll 8 inputs and outputs are via 2 tascam standard 25 Pin D-Sub connectors making connection to interfaces and speakers simple and intuitive.\u003c\/li\u003e\n\u003cli\u003eMix down switch enables you to check the Surround as a Stereo mix with an independent Sub switch controlling the LFE\/Sub.\u003c\/li\u003e\n\u003cli\u003eTimed relay protection on all speaker outputs to prevent power up\/down bangs.\u003c\/li\u003e\n\u003cli\u003eA large volume knob incorporating excellent channel matching and smooth feel.\u003c\/li\u003e\n\u003cli\u003eAn independent Headphone Amplifier with Individual Level Control with jack on the rear.\u003c\/li\u003e\n\u003cli\u003eKensington security slot (also called a K-Slot or Kensington lock).\u003c\/li\u003e\n\u003cli\u003eVery low profile desktop enclosure with a footprint of just 18x16cm.\u003c\/li\u003e\n\u003cli\u003eStylish and Rugged Enclosure will withstand the knocks of the studio.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220412474,"sku":"DRA-CMC7","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_5_5000x_c325816c-4038-4d1e-abfc-ca712006eeca.jpg?v=1780730685"},{"product_id":"drawmer-cmc3-studio-monitor-controller","title":"Drawmer CMC3 Studio Monitor Controller","description":"\u003cp class=\"p1\"\u003eThe Drawmer CMC3 Compact Monitor Controller brings together the key strengths of Drawmer’s most popular monitor controllers in a compact, low-profile desktop format. It retains the accurate and transparent audio quality associated with the MC2.1, the precision and control of the MC3.1, and the practical footprint of the CMC2, making it equally suitable for serious home studios and professional recording facilities.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAt the heart of the CMC3 is Drawmer’s commitment to honest monitoring. A monitor controller should not colour, warm, brighten or “improve” the signal - it should allow you to hear exactly what has been recorded. The CMC3 uses an active circuit design to avoid many of the limitations of passive controllers, delivering reliable level control and transparent audio performance for critical mix decisions.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe CMC3 supports three sets of stereo monitors plus a dedicated mono speaker or subwoofer output, allowing flexible A\/B comparison and practical multi-speaker monitoring. Its smooth main volume control uses a custom quad pot for excellent channel matching, while the front-panel preset volume control allows repeatable calibrated monitoring levels at the flick of a switch.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eConnectivity is comprehensive, with four stereo inputs including SPDIF digital input up to 24-bit\/192kHz, two balanced stereo jack inputs, and a 3.5mm input with variable level control for smartphones or portable playback devices. Two professional headphone outputs are included, each with dedicated amplification and level control, along with talkback using either the internal or an external microphone.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eFor mix checking, the CMC3 includes essential tools such as dim, mono, phase reverse, left cut, right cut and mute. Housed in a rugged all-steel enclosure with a Kensington security slot, it is a compact, accurate and highly capable monitoring hub designed for everyday studio use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact professional monitor controller for home studios and recording facilities\u003c\/li\u003e\n\u003cli\u003eTransparent active circuit design for accurate, uncoloured monitoring\u003c\/li\u003e\n\u003cli\u003eSupports three sets of stereo monitors\u003c\/li\u003e\n\u003cli\u003eDedicated mono speaker or subwoofer output\u003c\/li\u003e\n\u003cli\u003eMain volume control with custom quad pot for excellent channel matching\u003c\/li\u003e\n\u003cli\u003eFront-panel preset volume control for repeatable calibrated listening levels\u003c\/li\u003e\n\u003cli\u003eFour stereo inputs in total\u003c\/li\u003e\n\u003cli\u003eSPDIF digital input supporting up to 24-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eTwo balanced stereo jack inputs\u003c\/li\u003e\n\u003cli\u003e3.5mm stereo input with variable level control\u003c\/li\u003e\n\u003cli\u003eTwo professional headphone outputs with dedicated level control\u003c\/li\u003e\n\u003cli\u003eBuilt-in talkback with internal or external microphone option\u003c\/li\u003e\n\u003cli\u003eTalkback routing to dedicated mono output and headphones\u003c\/li\u003e\n\u003cli\u003eMix checking tools including dim, mono, phase reverse, left cut, right cut and mute\u003c\/li\u003e\n\u003cli\u003eLow-profile desktop enclosure measuring approximately 27 x 16 x 3.5 cm\u003c\/li\u003e\n\u003cli\u003eRugged all-steel construction built for studio use\u003c\/li\u003e\n\u003cli\u003eKensington security slot for added protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220609082,"sku":"DRA-CMC3","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_Drawmer_0002_cmc3-top-2_2000x_a361ff5e-a175-4767-b408-8639e3227c0f.jpg?v=1780730772"},{"product_id":"drawmer-cmc2-compact-monitor-controller","title":"Drawmer CMC2 Compact Monitor Controller","description":"\u003cp class=\"p1\"\u003eThe Drawmer CMC2 Compact Monitor Controller is a compact, accurate and affordable monitoring solution designed for project studios, home studios and smaller professional setups. It delivers the same transparent audio quality and reliable monitoring accuracy associated with Drawmer’s larger monitor controllers, including the MC2.1 and MC3.1, while keeping the layout practical, focused and easy to use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA monitor controller should let you hear your mix exactly as it is, without colouring, warming, brightening or altering the signal. The CMC2 uses an active circuit design to faithfully reproduce the audio signal while avoiding many of the limitations that passive monitor controllers can introduce. This makes it a dependable choice for critical listening, editing, recording and mix decisions.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe CMC2 offers flexible connectivity with two stereo balanced jack inputs plus a front-panel 3.5mm AUX input with variable level control for a smartphone, tablet or portable music player. It can control two sets of stereo monitors plus a mono subwoofer, with individual switching so you can compare speaker setups quickly and work with a subwoofer when required.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFor detailed mix checking, the CMC2 includes essential tools such as mono, phase reverse, dim and mute. A dedicated headphone amplifier with its own level control provides convenient front-panel access, making it suitable for both speaker-based monitoring and headphone checking during production or mixing sessions.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt into a rugged all-steel desktop enclosure, the CMC2 is designed to handle everyday studio use while keeping your workspace clean and uncluttered. With its low-profile design, compact 18 x 16 cm footprint and Kensington security slot, it is a practical and reliable monitoring hub for studios where accuracy, size and value all matter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact monitor controller for project studios, home studios and professional setups\u003c\/li\u003e\n\u003cli\u003eTransparent active circuit design for accurate, uncoloured monitoring\u003c\/li\u003e\n\u003cli\u003eUltra-low noise audio performance\u003c\/li\u003e\n\u003cli\u003eThree inputs in total\u003c\/li\u003e\n\u003cli\u003eTwo stereo balanced 1\/4” jack inputs\u003c\/li\u003e\n\u003cli\u003eFront-panel 3.5mm AUX input for smartphone, tablet or MP3 player\u003c\/li\u003e\n\u003cli\u003eVariable level control for the AUX input\u003c\/li\u003e\n\u003cli\u003eSupports two sets of stereo monitors\u003c\/li\u003e\n\u003cli\u003eMono subwoofer output with individual switching\u003c\/li\u003e\n\u003cli\u003eSpeaker outputs can be switched individually and simultaneously\u003c\/li\u003e\n\u003cli\u003eUseful for quick A\/B monitor comparisons\u003c\/li\u003e\n\u003cli\u003eTimed relay protection on speaker outputs to help prevent power up and power down bangs\u003c\/li\u003e\n\u003cli\u003eLarge main volume knob with paralleled custom quad pot\u003c\/li\u003e\n\u003cli\u003eExcellent channel matching and smooth control feel\u003c\/li\u003e\n\u003cli\u003eDedicated headphone amplifier with individual level control\u003c\/li\u003e\n\u003cli\u003eFront-panel headphone output for easy access\u003c\/li\u003e\n\u003cli\u003eMix checking tools include dim, phase reverse, mono and mute\u003c\/li\u003e\n\u003cli\u003eRugged all-steel enclosure built for studio use\u003c\/li\u003e\n\u003cli\u003eVery low-profile desktop design\u003c\/li\u003e\n\u003cli\u003eCompact footprint of approximately 18 x 16 cm\u003c\/li\u003e\n\u003cli\u003eKensington security slot for added protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447220740154,"sku":"DRA-CMC2","price":549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_drawmer-cmc2_2000x_3ed7204e-1a36-4c3f-850a-28de503396c7.jpg?v=1780730937"},{"product_id":"drawmer-dms2-d-clock-master-clock-distributor","title":"Drawmer DMS2 D-Clock Master Clock Distributor","description":"\u003cp class=\"p1\"\u003eThe Drawmer DSM-2 D-Clock is a professional 2-input, 20-output word clock measurement and distribution amplifier designed for modern digital studio environments. When working with multiple digital devices, stable clock distribution is essential for maintaining accurate digital synchronisation across converters, recorders, digital mixers and other studio equipment.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe DSM-2 solves a common studio problem - not having enough word clock outputs available, or needing to derive a stable clock signal from equipment that does not provide a dedicated word clock output. It accepts both BNC word clock and AES\/EBU digital inputs, allowing clock information to be distributed across a wider studio setup with confidence.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA 16-character blue LCD display provides clear reference measurement of the incoming sample rate, with support for incoming sample frequencies up to 768kHz. The DSM-2 also provides measurement modes for sample frequency with ppm error, as well as percentage pull up\/down display, making it especially useful in sound-for-picture workflows where video-related clocking requirements can be more complex.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBoth the AES\/EBU and BNC word clock inputs feature zero-latency loopthrough outputs, with switchable high impedance to help maintain the correct digital signal level for onward distribution. Sixteen BNC clock outputs are located on the rear panel, with a further four BNC clock outputs on the front panel for quick patching to additional digital devices.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt for professional studio integration, the DSM-2 D-Clock is a practical and reliable solution for distributing word clock across multiple digital devices, checking clock accuracy, and keeping complex digital systems properly synchronised.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-input \/ 20-output word clock measurement and distribution amplifier\u003c\/li\u003e\n\u003cli\u003eDesigned for professional digital studio clock distribution\u003c\/li\u003e\n\u003cli\u003eDual input design with BNC word clock and AES\/EBU input options\u003c\/li\u003e\n\u003cli\u003eClock information can be derived from word clock input or AES\/EBU audio signal\u003c\/li\u003e\n\u003cli\u003eUseful for devices with digital output but no dedicated word clock output\u003c\/li\u003e\n\u003cli\u003e20 BNC clock outputs in total\u003c\/li\u003e\n\u003cli\u003e16 rear-panel BNC clock outputs\u003c\/li\u003e\n\u003cli\u003e4 front-panel BNC clock outputs for quick patching\u003c\/li\u003e\n\u003cli\u003eZero-latency loopthrough on BNC input\u003c\/li\u003e\n\u003cli\u003eZero-latency loopthrough on AES\/EBU input\u003c\/li\u003e\n\u003cli\u003eSwitchable high impedance for correct digital signal level management\u003c\/li\u003e\n\u003cli\u003e16-character blue LCD display\u003c\/li\u003e\n\u003cli\u003eDisplays incoming sample frequencies up to 768kHz\u003c\/li\u003e\n\u003cli\u003eSample rate measurement with accuracy up to 2ppm\u003c\/li\u003e\n\u003cli\u003eMeasurement modes include sample frequency with ppm error\u003c\/li\u003e\n\u003cli\u003ePercentage pull up\/down display for video and sound-for-picture applications\u003c\/li\u003e\n\u003cli\u003eSupports standard sample rate workflows including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz\u003c\/li\u003e\n\u003cli\u003eHelps maintain reliable digital synchronisation across multiple devices\u003c\/li\u003e\n\u003cli\u003eUniversal voltage filtered mains power input\u003c\/li\u003e\n\u003cli\u003eSuitable for recording studios, post-production rooms, broadcast setups and digital audio facilities\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drawmer","offers":[{"title":"Default Title","offer_id":41447221067834,"sku":"DRA-DMS-2 D-Clock","price":1799.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/files\/th_DClock-xlarge.jpg?v=1780731119"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1764\/4443\/collections\/close_70s.jpg?v=1780733427","url":"https:\/\/gsus4.com.au\/collections\/drawmer-electronics.oembed","provider":"Gsus4","version":"1.0","type":"link"}